exhaust help :( - Toyota Yaris Forums

Masteraal · 01-29-2009, 04:12 AM

A mate of mine is selling his muffler. It came of a Misubishi Magna
Just wanted to know if itll fit the yaris?

Quote:

Magnaflow stainless rear muffler
Hey all.
The muffler currently has a 2.5" inlet (no flange), and twin tips (2.5" I think)? It's a straight-through item, so will give a nice note and liberate a few kw compared to most factory mufflers.

Has some scrapes on the underside, but they aren't normally visible, and the muffler works fine. Has done approx 30,000km. Being fully stainless there is no rust, and it should last for the life of the car its on.

After $120 for a quick sale, preference given to pickups. They retail for $350 brand new. Pics will come if requested.

Quote:

pics up :

Sorry it's pretty filthy, havn't had a chance to clean it. But I'm sure it'll polish up nice and shiny with a bit of elbow grease and metal polish or such (it's stainless after all). There's a bit of scuffing on the the tips and underside of the muffler (not visible unless car is up on a hoist), and the price reflects this. If you are a perfectionist, apprently you can get new tips for not that much cost.

Any help would be awesome

Thanks in advance

eTiMaGo · 01-29-2009, 09:46 AM

In theory sure, but you'll need a good shop to do the tubing to match up to your stock exhaust, and to align the hangers. No sorcery required, just some good welding skills...

marcus · 01-29-2009, 11:22 AM

welds worries me thats why im not going universal.. its very rust prone..

*kimona* · 01-29-2009, 12:57 PM

You need to know the length of the can, plus the length of the tail pipes. You can't stuff much of a can under the Vitz and come out looking good.

*kimona* · 01-29-2009, 01:00 PM

Quote:

Originally Posted by marcus

welds worries me thats why im not going universal.. its very rust prone..

No need to worry about GOOD welds, mate. Even the most expensive made-to-fit exhaust system is welded.

01-29-2009, 09:46 AM	#2
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	In theory sure, but you'll need a good shop to do the tubing to match up to your stock exhaust, and to align the hangers. No sorcery required, just some good welding skills... __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Installing Greddy TI-C Exhaust System	redyaris	DIY / Maintenance / Service	13	08-01-2009 04:05 AM
Custom Cat-Back exhaust Yaris TS	CASTREX	Yaris TS Talk	16	10-24-2008 12:56 PM
ZPI to produce yaris turbo kit and exhaust	turboyaris	Forced Induction Forum	15	06-09-2007 01:24 AM
GReddy prototype = Free Exhaust!	Chris_Lum	California	30	02-27-2007 10:13 PM
Fujitsubo Exhaust!!	MC-BPT	Sponsors Classifieds Area	17	11-16-2006 10:36 AM

01-29-2009, 11:22 AM	#3
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	welds worries me thats why im not going universal.. its very rust prone..

01-29-2009, 12:57 PM	#4
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	You need to know the length of the can, plus the length of the tail pipes. You can't stuff much of a can under the Vitz and come out looking good.