Bike Rack/Fit - Toyota Yaris Forums

imike929 · 03-01-2013, 08:11 PM

Hey guys, any advice and pictures as to bike transportation in the 3rd gen?? I tried putting the back seats down with the front wheel off and its just a bit big. Ive seen this topic in older posts but just wondering about the newer model

3rdSEman · 03-03-2013, 05:52 PM

For the sake of cars and bikes, I have always used platform style hitch mount racks. Shortly I'll once again fit an 1 1/4" receiver tube on a newly acquired SE. My bikes are light cross-country aluminum or carbon-fiber framed so weight is no issue.

Presently using:
http://kuatracks.com/en/products/bike/sherpa
...light and well made

Scubaru Steve · 03-03-2013, 09:38 PM

in my yaris i have a Swagman G2

love it and it carries both my bikes easy, its also designed for the 1 1/4 receiver. so jut get a standard trailer hitch for the yaris.
but i am going to install a set of airbags to lvl out the car since it does squat with 200lbs hanging 2 feet off the back.

nookandcrannycar · 03-04-2013, 04:34 AM

Quote:

Originally Posted by Scubaru Steve

in my yaris i have a Swagman G2

love it and it carries both my bikes easy, its also designed for the 1 1/4 receiver. so jut get a standard trailer hitch for the yaris.
but i am going to install a set of airbags to lvl out the car since it does squat with 200lbs hanging 2 feet off the back.

Any idea what the difference is in fuel economy - rack and bikes on vs. rack and bikes off?

Scubaru Steve · 03-04-2013, 11:12 AM

the only thing i notice is the way the car feels over bumps. rear feels more bouncy and heavier than the front hahaha. fuel economy is the same as having another 200lb passanger.

imike929 · 03-05-2013, 07:20 PM

As always, thanks for the input guys!

imike929 · 03-05-2013, 07:22 PM

By the way, all i had to do was scoot the front seat up a bit and i was able to get it in. You gotta be super careful because the plastic on the interior of the doors scratches terribly easy.

nookandcrannycar · 03-05-2013, 11:51 PM

Quote:

Originally Posted by Scubaru Steve

the only thing i notice is the way the car feels over bumps. rear feels more bouncy and heavier than the front hahaha. fuel economy is the same as having another 200lb passanger.

Thanks.

Shroomster · 03-08-2013, 11:06 AM

Sorry I'm late to the party, I meant to post up earlier but I didn't realize the pictures were deleted.
We went with a Yakima Doubledown 4

That red button at the bottom of the second pic, behind the upright, allows the entire assembly with bikes (if they're attached) to tilt down to access the hatch.

Scubaru Steve · 03-09-2013, 12:40 AM

ill have to take a pic of mine folded up when i put it back on for the summer.
folds straight up and still enough room to open hatch with it up. but its probably 3 times as much as the Yakima.

http://www.swagman.net/products/platform-racks/g2/

Shroomster · 03-09-2013, 12:12 PM

I wanted a platform/tire hold like yours but we shopped in store and didn't look online....like the look of yours though.

imike929 · 04-27-2013, 11:39 AM

What hitch did you guys use? I got a Curt 11050 that is supposed to be fitted for the 13 yaris but it doesnt seem to be wide enough, or i just may be making it harder than it needs to be.....

Shroomster · 04-27-2013, 06:00 PM

That sounds right, we purchased a curt hitch too. It fit with no problems just need to remove the one clip in the middle of the bumper to install the kit.

imike929 · 04-27-2013, 06:08 PM

Just kidding, i figured out the problem! It was a bit short and upon further inspection i found the one side was slightly bent. A little work with the rubber mallet and it is good to go and all bolted up! Thanks again

b20vteg · 04-28-2013, 01:17 AM

Quote:

Originally Posted by Scubaru Steve

in my yaris i have a Swagman G2

needz moar pics! (of the car haha)

bm_cricket · 06-09-2013, 10:43 AM

I just tried to mount the Curt #11050 to my 2013 Toyota Yaris SE and the hitch wouldn't clear my exhaust. The thing rattled. How did you do it? How much clearance do you have and do you feel that it fits well? Do you have any issues with the little Chrome dongle on your exhaust?

Scubaru Steve · 06-10-2013, 12:21 AM

i pulled the chrome thing off (slides off) and put a cut turbo coupler and clamp over the hitch to stop from rattling, i still need to find a sweet round tip to put on there. one of these days i will take some pics underneath. the hitch and diffuser line up perfectly.

bm_cricket · 06-11-2013, 05:05 PM

Quote:

Originally Posted by Scubaru Steve

i pulled the chrome thing off (slides off) and put a cut turbo coupler and clamp over the hitch to stop from rattling, i still need to find a sweet round tip to put on there. one of these days i will take some pics underneath. the hitch and diffuser line up perfectly.

I found that even with the chrome thing off the car the Curt hitch went essentially on top of the exhaust and the two of them were never more than a millimeter apart. A picture of your setup would be great as I only have a few days to either return or re-mount this hitch...

Maybe Curt has more than one design for this model? I am using the Curt #11050 which is listed as the correct one for the 2013 Yaris... But clearly doesn't fit properly on the Yaris SE...

And by "line up perfectly" I assume you mean "line up in the worst way possible"? The hitch bar goes straight through the exhaust cutout!

03-08-2013, 11:06 AM	#9
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	Sorry I'm late to the party, I meant to post up earlier but I didn't realize the pictures were deleted. We went with a Yakima Doubledown 4 That red button at the bottom of the second pic, behind the upright, allows the entire assembly with bikes (if they're attached) to tilt down to access the hatch. __________________ MicroImageonline forums - Shroomster Xda Forums - Shroomster Androidforums - Shroomster I'm noticing a pattern......

03-09-2013, 12:40 AM	#10
Scubaru Steve Awesome! Drives: 12 Yaris/07 yaris Join Date: Dec 2010 Location: calgary Posts: 323	ill have to take a pic of mine folded up when i put it back on for the summer. folds straight up and still enough room to open hatch with it up. but its probably 3 times as much as the Yakima. http://www.swagman.net/products/platform-racks/g2/ Last edited by Scubaru Steve; 03-09-2013 at 10:58 AM.

04-27-2013, 06:00 PM	#13
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	That sounds right, we purchased a curt hitch too. It fit with no problems just need to remove the one clip in the middle of the bumper to install the kit. __________________ MicroImageonline forums - Shroomster Xda Forums - Shroomster Androidforums - Shroomster I'm noticing a pattern......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK BIKE RACK ON YARIS WUT YOU GUYS THINK???	jdm-yaris	Cosmetic Modifications (Exterior/Interior)	9	08-22-2010 01:43 AM
Yaris hauling dirt bike?	kustom play	General Yaris / Vitz Discussion	13	05-17-2010 03:18 PM
Trunk Mount - Saris Bones 2 Bike Rack & New MT Bike	kuyachris84	Photo-Video-Media Gallery	11	07-14-2009 12:39 PM

03-01-2013, 08:11 PM	#1
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	Bike Rack/Fit Hey guys, any advice and pictures as to bike transportation in the 3rd gen?? I tried putting the back seats down with the front wheel off and its just a bit big. Ive seen this topic in older posts but just wondering about the newer model

03-03-2013, 09:38 PM	#3
Scubaru Steve Awesome! Drives: 12 Yaris/07 yaris Join Date: Dec 2010 Location: calgary Posts: 323	in my yaris i have a Swagman G2 love it and it carries both my bikes easy, its also designed for the 1 1/4 receiver. so jut get a standard trailer hitch for the yaris. but i am going to install a set of airbags to lvl out the car since it does squat with 200lbs hanging 2 feet off the back.

03-04-2013, 11:12 AM	#5
Scubaru Steve Awesome! Drives: 12 Yaris/07 yaris Join Date: Dec 2010 Location: calgary Posts: 323	the only thing i notice is the way the car feels over bumps. rear feels more bouncy and heavier than the front hahaha. fuel economy is the same as having another 200lb passanger.

03-05-2013, 07:20 PM	#6
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	As always, thanks for the input guys!

03-05-2013, 07:22 PM	#7
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	By the way, all i had to do was scoot the front seat up a bit and i was able to get it in. You gotta be super careful because the plastic on the interior of the doors scratches terribly easy.

03-09-2013, 12:12 PM	#11
Shroomster '07 to '12:2 wipers to 1? View User's Garage Drives: '12 5-door LE & '14 5-door LE Join Date: Apr 2007 Location: Orlando Posts: 1,999	I wanted a platform/tire hold like yours but we shopped in store and didn't look online....like the look of yours though. __________________ MicroImageonline forums - Shroomster Xda Forums - Shroomster Androidforums - Shroomster I'm noticing a pattern......

04-27-2013, 11:39 AM	#12
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	What hitch did you guys use? I got a Curt 11050 that is supposed to be fitted for the 13 yaris but it doesnt seem to be wide enough, or i just may be making it harder than it needs to be.....

04-27-2013, 06:08 PM	#14
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	Just kidding, i figured out the problem! It was a bit short and upon further inspection i found the one side was slightly bent. A little work with the rubber mallet and it is good to go and all bolted up! Thanks again

06-09-2013, 10:43 AM	#16
bm_cricket Drives: 2013 Yaris SE, Manual Join Date: Jun 2013 Location: United States Posts: 5	I just tried to mount the Curt #11050 to my 2013 Toyota Yaris SE and the hitch wouldn't clear my exhaust. The thing rattled. How did you do it? How much clearance do you have and do you feel that it fits well? Do you have any issues with the little Chrome dongle on your exhaust?

06-10-2013, 12:21 AM	#17
Scubaru Steve Awesome! Drives: 12 Yaris/07 yaris Join Date: Dec 2010 Location: calgary Posts: 323	i pulled the chrome thing off (slides off) and put a cut turbo coupler and clamp over the hitch to stop from rattling, i still need to find a sweet round tip to put on there. one of these days i will take some pics underneath. the hitch and diffuser line up perfectly.