FlexPod gauge mount on Yaris - Toyota Yaris Forums

Slacky · 03-08-2014, 02:19 AM

I found this flex pod gauge mount. It was designed to be used on the factory screws located behind the steering wheels.

http://www.cravenspeed.com/products/...uge-Mount.html

Does anyone have the resources to find out if the distance between the (2) screws shares the same spec with any of these models:

Scion FR-S (2012-2013)
Toyota 4Runner (2003-2009)
Toyota 4Runner (2010-2013)
Toyota FJ Cruiser (2007-2013)
Toyota Tacoma (2005-2013)
Toyota Tundra (2000-2006)
Toyota Tundra (2007-2013)

I love the look if these gauge mount its so clean....

Revsson · 03-08-2014, 08:51 AM

Interesting idea, though somewhat expensive. I imagine that CTScott is the
man to answer this question. Or you might just want to contact Craven Speed
themselves. They could always add the Yaris to the list, especially for those
of us with the center gauge console, who might want to buy this.

One question would be how much clearance would there be to open the glove box
and still have the gauges mounted there.

jetblast · 03-08-2014, 07:11 PM

Nice piece

jcboy · 03-10-2014, 12:15 PM

Nice! Tempting.

CTScott · 03-10-2014, 12:41 PM

I just checked and the screw positions are identical between my Yaris and my 2011 Tacoma.

Slacky · 03-11-2014, 03:50 PM

Quote:

Originally Posted by CTScott

I just checked and the screw positions are identical between my Yaris and my 2011 Tacoma.

Great news...
Thanks for the support.

mazilla · 03-11-2014, 05:27 PM

Expensive...and wires hanging out of the back is lame for that $. Drivers side glove box mount the gauges and if you decide to sell just replace the lid with one from a wrecker. My .02

Revsson · 03-11-2014, 05:38 PM

How easy is it to replace the glove box lid on the Driver's side?

My 800th post...I gotta long way to go to catch up to CTScott.

CTScott · 03-11-2014, 08:18 PM

Quote:

Originally Posted by Revsson

How easy is it to replace the glove box lid on the Driver's side?

My 800th post...I gotta long way to go to catch up to CTScott.

To replace the glove box top you have to remove the dash top to get at the mounting screws.

03-08-2014, 07:11 PM	#3
jetblast Drives: Gen 1 XB Join Date: Nov 2012 Location: Nor Cal Posts: 72	Nice piece __________________ Why strive for a JDM BB, when you can promote the Scion badge?

03-10-2014, 12:15 PM	#4
jcboy Drives: Sedan 07 Join Date: Oct 2012 Location: Asia Posts: 478	Nice! Tempting. Last edited by jcboy; 03-10-2014 at 01:46 PM.

03-10-2014, 12:41 PM	#5
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	I just checked and the screw positions are identical between my Yaris and my 2011 Tacoma. __________________

03-11-2014, 05:27 PM	#7
mazilla advocatus diaboli Drives: 07 Yaris hatch Join Date: Mar 2011 Location: San Jacinto California Posts: 1,126	Expensive...and wires hanging out of the back is lame for that $. Drivers side glove box mount the gauges and if you decide to sell just replace the lid with one from a wrecker. My .02 __________________ -Type 07 FFL- My odometer 03/11 http://i205.photobucket.com/albums/b...a/2843ed85.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaris Motor Swap Thread Read before posting swap threads	Sabretooth	Performance Modifications	218	02-19-2024 09:04 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
New Yaris race car	Jason@SportsCar	Tracking, Racing, Auto-X Forum	83	11-01-2012 02:32 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

03-08-2014, 08:51 AM	#2
Revsson View User's Garage Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008 Location: Southeast Wisconsin Posts: 810	Interesting idea, though somewhat expensive. I imagine that CTScott is the man to answer this question. Or you might just want to contact Craven Speed themselves. They could always add the Yaris to the list, especially for those of us with the center gauge console, who might want to buy this. One question would be how much clearance would there be to open the glove box and still have the gauges mounted there.

03-11-2014, 05:38 PM	#8
Revsson View User's Garage Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008 Location: Southeast Wisconsin Posts: 810	How easy is it to replace the glove box lid on the Driver's side? My 800th post...I gotta long way to go to catch up to CTScott.