Anyone familiar with vinyl cutters/plotters? - Toyota Yaris Forums

Thirty-Nine · 03-05-2009, 12:55 PM

I was thinking about purchasing a vinyl cutter/plotter so I can start making my own decals and such. Does anyone know anything about these? The best site I've found thus far is www.uscutter.com ...

I wouldn't want to spend much money, since it wouldn't be a full-time thing.

Anyways, if anyone has any thought on the matter, that'd be great.

SailDesign · 03-05-2009, 03:09 PM

Go to JSISign.com - they are a great place, good service, and prices that are good. I used a Summa cutter (ancient one) up until last year, and it still ran OK and cut well. I would def recommend the brand, and JSI as a source.

Tamago · 03-05-2009, 03:27 PM

PM MORGAN

Thirty-Nine · 03-05-2009, 04:45 PM

Thanks

33OH · 03-05-2009, 04:49 PM

If I were you, I'd get a used Roland. They last forever and the blades are easy to change out, and really cheap. Also, the settings and everything are extremely basic and make sense.

I've used a Roland 24" PNC 1000 CAMM-1 and I loved it.

We also had a Gerber 15" cutter/plotter that worked well too, but was a little more expensive.

And a Mutoh 48" cutter that was EXPENSIVE as hell. haha.

33OH · 03-05-2009, 04:56 PM

You may even be able to get a printer/cutter combo for cheap. Then I'd look up an older Gerber Edge.

Morgan · 03-05-2009, 11:01 PM

replied

...btw anyone need vinyl work?

Thirty-Nine · 03-06-2009, 12:31 PM

Quote:

Originally Posted by Morgan

replied

...btw anyone need vinyl work?

FYI, I just sent you an e-mail (although I realized I forgot to put a subject!).

Andy

03-05-2009, 12:55 PM	#1
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Anyone familiar with vinyl cutters/plotters? I was thinking about purchasing a vinyl cutter/plotter so I can start making my own decals and such. Does anyone know anything about these? The best site I've found thus far is www.uscutter.com ... I wouldn't want to spend much money, since it wouldn't be a full-time thing. Anyways, if anyone has any thought on the matter, that'd be great. __________________ Subcompact Culture: The Small car blog

03-05-2009, 04:45 PM	#4
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Thanks __________________ Subcompact Culture: The Small car blog

03-05-2009, 11:01 PM	#7
Morgan View User's Garage Drives: 07 MM LB Join Date: Oct 2008 Location: PCB, FL Posts: 504	replied ...btw anyone need vinyl work? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pictures from Sundays 2-member meetup & vinyl install in Portland	Astroman	Photo-Video-Media Gallery	20	02-08-2010 01:55 AM
Looks familiar	jambo101	General Yaris / Vitz Discussion	8	12-29-2008 05:02 PM
Vinyl HELP!	RacerFreakXXX	Cosmetic Modifications (Exterior/Interior)	11	12-04-2008 08:45 PM
new vinyl for the biz	imartful	Cosmetic Modifications (Exterior/Interior)	5	09-27-2007 05:22 PM
Smoke your own tail lights	ChinoCharles	Cosmetic Modifications (Exterior/Interior)	9	01-15-2007 11:00 PM

03-05-2009, 03:09 PM	#2
SailDesign Drives: . Join Date: Feb 2007 Location: . Posts: 1,931	Go to JSISign.com - they are a great place, good service, and prices that are good. I used a Summa cutter (ancient one) up until last year, and it still ran OK and cut well. I would def recommend the brand, and JSI as a source.

03-05-2009, 04:49 PM	#5
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	If I were you, I'd get a used Roland. They last forever and the blades are easy to change out, and really cheap. Also, the settings and everything are extremely basic and make sense. I've used a Roland 24" PNC 1000 CAMM-1 and I loved it. We also had a Gerber 15" cutter/plotter that worked well too, but was a little more expensive. And a Mutoh 48" cutter that was EXPENSIVE as hell. haha.

03-05-2009, 04:56 PM	#6
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	You may even be able to get a printer/cutter combo for cheap. Then I'd look up an older Gerber Edge.