|
05-06-2009, 08:31 PM | #1 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
09' tach wire different? [pic]
So I ran into a problem with my tach installation. So i hooked up my orange wire(tach) to the green/blue wire on the far left. But I dont get any reading.
here is a pic of what wire I hooked it up to. Also I hooked up the rest of the wires to my deck, but seems like the backlight stays on all the time. I hooked up the red(tach) to red(deck), white(tach) to yellow (deck), and well the black went to the ground. Did I mix up the wires? |
05-06-2009, 08:46 PM | #2 |
I believe the tach signal wire is only green/blue on 07/08.
the circled wire is where mine is, and I believe it would be the same on yours (just a different color), since that connector is industry standard. |
|
05-06-2009, 09:11 PM | #3 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
I hooked it up to that wire and same thing. no reading. I wonder if I am tapping from the right place?
here is where I am. and here the wire Anyone know what to do? |
05-06-2009, 09:14 PM | #4 |
You are in the right place.
On the tach the red is 12v power, the white is for the dimmer switch (illumination) wire. that wire on the OBDII port is the correct one to the best of my knowledge. where did you ground to? If you can post a pic of the electrical connections as well |
|
05-06-2009, 09:23 PM | #5 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
I connected it to the deck ground, I thought it was fine since the back light and everything else works, just no reading. Should I ground it to the car?
|
05-06-2009, 10:59 PM | #6 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
I also grounded it to the body, and still no reading. any know whats wrong?
|
05-07-2009, 12:32 AM | #7 |
Drives: '08 LB MT Bayou Join Date: Oct 2008
Location: Colorado
Posts: 1,671
|
You may have fried it by hooking the tach sensor to the wrong wire.
|
05-07-2009, 12:40 AM | #8 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
Can someone confirm this? if i need to get a new one or maybe not.
|
05-07-2009, 01:16 AM | #9 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
I thought 07 was green, 08 was pink, and don't know 09
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
05-07-2009, 01:25 AM | #10 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
yah supposely 09 is the light brown wire that is all the way to the left separated from the rest. But when i hooked it up still didnt get any reading.
I had a problem like this with my Celica, and I pulled the wire threw the firewall and put the wire near where the tach fuse was. I want to give it a try. I looked in the manual but cant find where the tach fuse is. can some one point it out for me? |
05-07-2009, 04:38 AM | #11 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
nevermind problem solved
|
05-07-2009, 05:16 AM | #12 |
I ♥ Yaris
Drives: Black 08 LB MT & red 97 Miata Join Date: Oct 2008
Location: Indianapolis IN
Posts: 1,313
|
what was the problem? (I plan on adding a tach soon, myself)
__________________
The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt. - Bertrand Russell |
05-07-2009, 05:27 AM | #13 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
well my tach was straight from Japan, so i guess normally the white wire that would go to the consistant was for the tach wire and yeah. I would never have known that if battleversiontc didnt help me.
|
05-07-2009, 04:08 PM | #14 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
so which is the color for tach line? (car side) Glad you got it to work, makes me confident to do mine this weekend.
|
05-07-2009, 04:23 PM | #15 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
the white wire went to the tach
|
05-07-2009, 09:58 PM | #16 |
on 09 its the lt brown wire closet to the hood latch on the obd2 diagostic port post #3 second picture is the tach wire for 09, but for all the years the tach wire for wiring a aftermarket tach on the wire should be in the same location just different color and if toyota ever changed it they need a new adapter in order to run diagnostics
tach connection on obd2 plug 07/08 lt greenish blue wire 09 lt brown wire
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
01-24-2011, 01:20 PM | #17 |
I've made a post!
Drives: toyota Yaris sedan aka Belta Join Date: Nov 2010
Location: Malta
Posts: 1
|
Hi has anyone installed an aftermarket tach on a toyota belta japan import please? I would like to know where to fit the tach wire to the obd port if possible. cheers Mark.
|
01-24-2011, 01:29 PM | #18 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ Read the post before yours. It's most likely that the position stays the same even if the wire color changes.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blitz S/C being installed this Saturday! | LtNoogie | Forced Induction Forum | 179 | 12-14-2012 08:53 PM |
Tach Illumination wire | Liu997 | DIY / Maintenance / Service | 6 | 05-29-2009 11:11 AM |
Tach ECU wire, auto | Liu997 | DIY / Maintenance / Service | 8 | 05-06-2009 01:44 PM |
Dimmer Wire for Tach | mrrock | DIY / Maintenance / Service | 7 | 11-29-2006 07:18 PM |
Harman Kardon Drive + Play for IPOD | sroberts | In Car Entertainment + Electronics (audio / video / alarm) | 5 | 07-01-2006 01:05 PM |