DIY - Bypassing Tire Pressure Warning System (TPWS / TPMS) - Toyota Yaris Forums

birdman · 08-02-2010, 03:41 AM

In post #115 the diagram shows the brown wire is cut. The upper part you have pictured connected to a blue line going to one side of the switch. On the other side of the switch there is a blue line that splices to a white wire. The portion of the brown wire that is attached to the connector you show a blue line attached to it. That blue line terminates at a black dot. If the black dot doesn't indicate a ground then what does it indicate? There is no mention of a +5v line in that diagram. This simple diagram isn't simple to me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire pressure sensors	Tink1	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	11	10-21-2008 05:53 PM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 10:07 PM
The Tire inflation debate...	Tankota	General Yaris / Vitz Discussion	20	06-01-2006 07:09 PM

08-02-2010, 03:41 AM	#11
birdman Drives: '08 Blazing Blue Yaris LB Join Date: Sep 2009 Location: USA Posts: 496	In post #115 the diagram shows the brown wire is cut. The upper part you have pictured connected to a blue line going to one side of the switch. On the other side of the switch there is a blue line that splices to a white wire. The portion of the brown wire that is attached to the connector you show a blue line attached to it. That blue line terminates at a black dot. If the black dot doesn't indicate a ground then what does it indicate? There is no mention of a +5v line in that diagram. This simple diagram isn't simple to me.