2ZZ Yaris, It can be done! - Page 2 - Toyota Yaris Forums

ddongbap · 01-28-2009, 02:43 AM

Quote:

Originally Posted by pinoypizzaboy

this car is a perfect match for a k20 fit

My thoughts EGGGGGzactly.

TEHxFALLEN V1.2 · 01-28-2009, 03:32 AM

I jizzed in my pants.

eTiMaGo · 01-28-2009, 04:13 AM

Aaaah nice to actually see a picture! There's apparently a few of these running around Bangkok but I had yet to see any with my own eyes, gotta make for an insane drive!

cdydjded · 01-28-2009, 06:43 AM

Quote:

Originally Posted by pinoypizzaboy

can this fiit the LB?

Yes it will fit the LB.

cdydjded · 01-28-2009, 06:46 AM

Quote:

Originally Posted by Thirty-Nine

This must be the vehicle whose video has been posted up running darn-fast quarter mile times. Very cool. I'm sure it was a lot of work shoehorning that engine into the bay. Plus, I know I'd have a problem registering something like that for street use. Regardless, it's pretty neat!

Yes it is the same car in the video, it runs 13's on motor & 12.50's on a 50 shot with crappy 60ft's, beleive it of not it fits pretty well, not sure on registration issues but it would be like having a K series in a Civic, find out with someone in you town if there are any issues

cdydjded · 01-28-2009, 06:49 AM

Quote:

Originally Posted by pinoypizzaboy

this car is a perfect match for a k20 fit

The K20 is a hell of an engine, but I can assure you it will be 100 times harder to install, its easier to buy a Civic & purchase all the already available parts from Hybrid Racing or Hasport

cdydjded · 01-28-2009, 06:50 AM

Quote:

Originally Posted by thebarber

i imagine the swap involves some notching/boxing of the framing rails...

Yes the frame rail on the drivers side needs to be notched, but only if you use a 6spd, also the engine cradle needs to be modified

cdydjded · 01-28-2009, 06:53 AM

Quote:

Originally Posted by PHXDEMON

I'm fine with that. The only thing I'm afraid of is extensive wiring.

Wiring is the biggest issue with the swap & not just anyone can do it

Tamago · 01-28-2009, 07:22 AM

Quote:

Originally Posted by cdydjded

Wiring is the biggest issue with the swap & not just anyone can do it

wiring isn't THAT daunting if one takes his time

cdydjded · 01-28-2009, 09:46 AM

Quote:

Originally Posted by Tamago

wiring isn't THAT daunting if one takes his time

Tamago you'll like this info, the guy I met was 50% of the way done in installing a 2ZZ in a xA, I have a video of that also, I took video on my BlackBerry, can someone help me on how to post the videos?

Tamago · 01-28-2009, 10:00 AM

Quote:

Originally Posted by cdydjded

Tamago you'll like this info, the guy I met was 50% of the way done in installing a 2ZZ in a xA, I have a video of that also, I took video on my BlackBerry, can someone help me on how to post the videos?

that sounds good. how big are the videos, if they're under 10mb you can email them to me. PM me for my email address.

is the car in the US or puerto rico

whooppee777 · 01-28-2009, 10:24 AM

Quote:

Originally Posted by Tamago

is the car in the US or puerto rico

if its white and in PR then its the same one i've posted videos of during runs at the track.

did the guy say how much this cost him, who installed it and what hassles did he have?

cdydjded · 01-28-2009, 10:35 AM

Quote:

Originally Posted by whooppee777

if its white and in PR then its the same one i've posted videos of during runs at the track.

did the guy say how much this cost him, who installed it and what hassles did he have?

Yes its the white one from PR, I did not ask him about cost because it would not relate towhat it would cost here, he did all the mechanical work & an auto electrician did all the electrical work, as for hassles there are some like with any swap, I have all the details & will inform everyone soon

Nexus1155 · 01-28-2009, 10:56 AM

So if i have an auto tranny i wouldn't have to notch the frame rail? Do all the stock electronics work with the current wiring as well? I mean $1000-2000 for 180hp vs $4000 for 140hp makes alot more more sense?

we need more info PLEASE!!!!

Tamago · 01-28-2009, 10:59 AM

Quote:

Originally Posted by Nexus1155

So if i have an auto tranny i wouldn't have to notch the frame rail? Do all the stock electronics work with the current wiring as well? I mean $1000-2000 for 180hp vs $4000 for 140hp makes alot more more sense?

we need more info PLEASE!!!!

not sure you're gonna find a 2ZZ for $2000 complete with ECU.

also i'm pretty sure your stock auto transmission is not gonna like the 2ZZ very much

KCALB SIRAY · 01-28-2009, 11:04 AM

Finding a good deal on an engine is not as hard as one would think, but it takes some effort to look in the right places. I found mine, complete with ECU and tranny with only 900 miles on it for $1,100

cdydjded · 01-28-2009, 11:05 AM

Quote:

Originally Posted by Nexus1155

So if i have an auto tranny i wouldn't have to notch the frame rail? Do all the stock electronics work with the current wiring as well? I mean $1000-2000 for 180hp vs $4000 for 140hp makes alot more more sense?

we need more info PLEASE!!!!

$1000-$2000 is a little short, a complete 2ZZ, motor, 6 spd trans, ecu, wiring harness ect will run $3000-$3500

Thej3sta2 · 01-28-2009, 11:15 AM

Quote:

Originally Posted by pinoypizzaboy

this car is a perfect match for a k20 fit

ewwwwww hondaaaa

01-28-2009, 03:32 AM	#20
TEHxFALLEN V1.2 Alpha Kenny One. View User's Garage Drives: '08 NCP91 Join Date: Oct 2008 Location: Land of fix-it tickets, CA. Posts: 1,643	I jizzed in my pants. __________________ FUCK USDM I ♥ JDM HOES. I'm so JDM, I sleep on the right side of the bed. \|J\|D\|M\| my anti DUB CQB for life. Sponsored by: Micro Image http://microimageonline.com

01-28-2009, 04:13 AM	#21
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 6,951 Blog Entries: 11	Aaaah nice to actually see a picture! There's apparently a few of these running around Bangkok but I had yet to see any with my own eyes, gotta make for an insane drive! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson

01-28-2009, 11:04 AM	#34
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,326	Finding a good deal on an engine is not as hard as one would think, but it takes some effort to look in the right places. I found mine, complete with ECU and tranny with only 900 miles on it for $1,100 __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaris and Echo short shifters sale, $30 off!	TWM Performance	TWM Performance	8	11-17-2008 02:23 PM
Florida Yaris Meet! 6/23/2007!	Sabretooth	Southeast	13	06-05-2007 06:46 PM
News : 2007 Toyota Yaris - the little Euro's official arrival	VitzBoy	General Yaris / Vitz Discussion	1	01-13-2006 06:52 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	0	01-12-2006 05:27 PM

01-28-2009, 10:56 AM	#32
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 834	So if i have an auto tranny i wouldn't have to notch the frame rail? Do all the stock electronics work with the current wiring as well? I mean $1000-2000 for 180hp vs $4000 for 140hp makes alot more more sense? we need more info PLEASE!!!!