Yaris Sedan Deadening and Sound system upgrade - Toyota Yaris Forums

sqcomp · 04-06-2010, 11:16 AM

That depends on your axis response of the tweeters. Personally, either of those two, I'd probably do the first one. But you really have to hear the results to decide the aiming.

Where are your mids, in the doors? What is your crossover slope and frequency at?

Yeah! Dynamat sucks compared to B-Quiet!

_S7V7N_ · 04-06-2010, 11:28 AM

I have mine like the one's shown in example B , I'm fixin to remount them flat to see what type of result i can get.

derickveliz2 · 04-06-2010, 02:07 PM

Quote:

Originally Posted by sqcomp

That depends on your axis response of the tweeters. Personally, either of those two, I'd probably do the first one. But you really have to hear the results to decide the aiming.

OK, I'm going to put everything together before installing Tweeters! and test them

Quote:

Originally Posted by sqcomp

Where are your mids, in the doors?

YES!

Quote:

Originally Posted by sqcomp

What is your crossover slope and frequency at?

OK, I'm clue less here, how do I found this out, I got the same components as _SeVeN_ (HIFONICS ZXi6.5C ZEUS 6.5") http://www.yarisworld.com/forums/showthread.php?t=26407

.

.Thanks

derickveliz2 · 04-06-2010, 02:15 PM

swidd...

What kind of rubberized coating did you use in your wheel wells and how did you do it?

Thanks

.

04-06-2010, 11:16 AM	#1
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	That depends on your axis response of the tweeters. Personally, either of those two, I'd probably do the first one. But you really have to hear the results to decide the aiming. Where are your mids, in the doors? What is your crossover slope and frequency at? Yeah! Dynamat sucks compared to B-Quiet! __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

04-06-2010, 11:28 AM	#2
_S7V7N_ Drives: Yaris 4 Door Sedan Join Date: Dec 2008 Location: South Texas Posts: 805	I have mine like the one's shown in example B , I'm fixin to remount them flat to see what type of result i can get. __________________ Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3

04-06-2010, 02:15 PM	#4
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	swidd... What kind of rubberized coating did you use in your wheel wells and how did you do it? Thanks . __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sound deadening: sq footage amount for 3dr	goku87	In Car Entertainment + Electronics (audio / video / alarm)	29	11-14-2013 12:37 PM
2007 Yaris S Sound Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	70	12-13-2010 07:40 PM
Sound deadening	06vitzRS	General Yaris / Vitz Discussion	10	05-05-2010 01:51 PM
Sedan Door Panel Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	42	06-01-2009 02:47 PM