|
05-27-2012, 04:38 PM | #37 |
Drives: 2012 toyota yaris Join Date: Jan 2012
Location: Hollywood, Florida
Posts: 375
|
looking good dude !!!
__________________
2012 yaris L model 2014 wrangler unlimited sport |
05-27-2012, 05:00 PM | #38 | |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
Quote:
Any way you can give me details on the trimming you did and possibly any close up pics? I really need to roll my fenders at the least, but for now I picked up a set of those Firestone Air Rides like CTScott to stiffen things up to reduce rubbing in the rear. Looks very tasteful btw.
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
|
05-27-2012, 05:12 PM | #39 |
Drives: red bare bone yaris hb 3dr Join Date: May 2009
Location: columbus
Posts: 1,022
|
did you use any shim camber on the rear ? and did you also strech the rear fender ?
I talked to Jeff@microimage, he said I have to get the spc bolt camber on the front for sure and push the top of the wheel all the way in to do the alignment, but I forgot the ask about the rear. Im trying to get the same wheel in gold .... , but with yokohama 195/40/17 S drive tires. thanks man, Tan |
06-27-2012, 07:31 PM | #40 |
Drives: 08 hb 5sp Join Date: Jan 2009
Location: Socal
Posts: 40
|
Yes camber bolt is required up front. No camber change for the rear. I did move the rear suspension arm's mounting bolt to the top hole and it is within OEM alignment specs with no correction needed.
My fenders are rolled but not pulled. I tried rolling them with my Eastwood fender roller but was unsuccessful. The yaris sheet metal is so thin it was not possible to roll them without also pulling at the same time. I ended up doing the majority of the roll with the wooden handle of a hammer. Trimming and cutting is needed too. Front fender liners were trimmed away from the fender lip and bumper's edge. Bumper tabs were cut off and the metal mounting spot cut away from fender. Rear fender needs the point between the quarter panel and the inner fender sheet metal cut and hammered flat. If you want tight clearances like mine then 6/3k spring rates will not work. Red on gold should look neat. |
01-08-2013, 09:02 PM | #41 |
Drives: 08 hb 5sp Join Date: Jan 2009
Location: Socal
Posts: 40
|
This car is now for sale.
I'm not on this forum often so if you have any questions shoot me an email at zfarina@yahoo.com |
01-09-2013, 10:34 AM | #42 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
What a beautiful setup it was I hope the new owner keeps it as is
GLWS |
01-09-2013, 01:47 PM | #43 |
Drives: 2013 Yaris Join Date: Oct 2011
Location: Portland, OR
Posts: 914
|
Sexy. Jealous of the new owner's spring rates lol
|
01-21-2013, 01:22 AM | #44 |
Drives: 08 hb 5sp Join Date: Jan 2009
Location: Socal
Posts: 40
|
tell your friends
this car is collecting dust in my garage and needs a new owner! |
01-22-2013, 04:33 AM | #45 |
Stage ...Base
Drives: Toyota Yaris LB '07 Join Date: Oct 2012
Location: South Africa
Posts: 149
|
Still one of the neatest yaris' I've seen! Love the stance!
|
01-22-2013, 10:41 PM | #46 |
Top Notch!
|
Love it!
How much?
__________________
Blah, Blah, Blah, Blah |
01-24-2013, 07:54 PM | #47 |
Drives: 08 hb 5sp Join Date: Jan 2009
Location: Socal
Posts: 40
|
Thank you.
I'm asking $8800 obo Car has about 80k miles, clean title, and well maintained. Located in San Diego |
04-09-2013, 05:25 AM | #48 |
I've made a post!
Drives: Yaris Join Date: Mar 2013
Location: Singapore
Posts: 1
|
sorry for digging old thread.
what the best offset for 18 x 8" without any mod. everything is stock. |
04-09-2013, 10:00 AM | #49 |
Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
|
|
04-09-2013, 12:33 PM | #50 |
I love that Wheels!!!!!! XXR right? Nice looking stance! ;-) Like FLUSH STYLE!!! ;-) ;-)
Greez from Germany PJ.
__________________
|
|
04-09-2013, 01:32 PM | #51 |
Drives: red bare bone yaris hb 3dr Join Date: May 2009
Location: columbus
Posts: 1,022
|
For that width, try any wheels with around +40 - +45 offsets .
Why no lowered ? Singapore road is good enough as far as I remember ... |
|
|