Installing AMP 2010 yaris HB

[Aineal]

Originally Posted by TOLMACH

http://www.ebay.com/itm/23-OVERSIZE-...item4d0df2b7cc

I like that they say their gauge 4 is real gauge 4 (25 mm2)

Cheaper stuff will also do the job
http://www.ebay.com/itm/4-Gauge-Amp-...item19e59d8f2c

thanks

[sqcomp]

Aineal here in VA are you? I ask because there's a SLIM chance that I can meet with you to discuss the proper way to install an amplifier.

The planets have to align, seeing as I'm in the Bahamas now, flying back into Dulles on Saturday and then flying out to Portland on Sunday...

Honestly, What you need requires a trip to a sound shop and their permission to root through the used wire box (which I'm pretty sure every shop has) and a root through their scrap MDF.

You don't need to buy a thing online. IT's just a smile, a handshake and a few minutes of jaw jacking.

Since my Yaris is back home on the west coast, I'd show you what I did in my wife's truck for her system. Everything I used for peripherals in her truck was from the scrap bins from my local shop.

[Aineal]

Hey sqcomp im from cville! I just got everything wired up yesterday and eveything is working well :) i will post pics when i get a chance tomorrow, it took me 5 hours to do everything , but i found the hole in the firewall really fast and installation was a success

[UberSilver]

Originally Posted by nookandcrannycar

How did you solve the floor issue that TOLMACH mentions in post #6 ?

I cut a piece of 3/4 ply, to 20"x10". Bolted that to the floor, then used wood screws to hold down the amp.

[nookandcrannycar]

Originally Posted by UberSilver

I cut a piece of 3/4 ply, to 20"x10". Bolted that to the floor, then used wood screws to hold down the amp.

Thanks .