|
04-01-2014, 10:31 PM | #2737 |
Roadrunner Jr.
|
D,
Heads up...I'm talking with Jim right now. I may trade him my ML3800 for all four DD speakers (the two W6.5's and two AT28 tweeters) working off the crossovers on the S4b I have. I may put the dual 8" sub enclosure in the car again to keep up with the mids... If the mid woofers pass the "sqcomp" SQ test I'll work with you to get you a pair. OH! Do you remember ever talking with Aaron at the shop? He is now working for DD in OKC! If you even need help with DD, you have an "in" with the company.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
04-02-2014, 12:36 AM | #2738 |
Thanks!
I do have some issues in the CLA to resolve first. 1.- Where to put the P99, under the dash??, above the center console??, I don't know for sure??? 2.- If I go with Horns, I may have to go with Mini Horns, because the Airbags, foot heating ducts, OBD connector and hood opener 3.- Worst case scenario I swap the P99 for a Bit 10 or similar and use OEM head unit with OEM Door speakers and Sail OEM Tweeters (I don't really want to go this way) My goals are: 1.-Keep it simple and stock look if possible 2.-if I sell or trade later it should be an easy task to uninstall 3.-I would like to try a pair of Horns. 4.-I would like to use the P99 5.-Use Door speakers as Midbass woofer 6.-Possibility to use OEM tweeters at sailpanels even if going with Horns 7.-IDQ12 is going IB in the Trunk 8.-Use only 2 Amps and they go in the Trunk... ID (175x2) and PB 5.1 (75x4+200x1) and Finally if YW doesn't want me to talk about my new build in here, please let me know and I'll just plug a LINK. Thanks again! D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
04-02-2014, 01:19 AM | #2739 |
I vote this stays here. This place would be slow without this thread.
Give other link too though.
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
04-02-2014, 03:39 AM | #2740 |
Derick can that P-99 go in the glove box ? That interior looks pretty darn tight.
Does the factory unit have any sort of Auxiliary ? You're going to need to still access your factory unit on a regular basis....i wouldn't recommend messing with any of it. If this is the way your interior looks : What does the lil compartment under your temp gauges look like ? does it easily pop out ?
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
04-02-2014, 08:02 AM | #2741 | |
Quote:
No Auxiliary from factory I rather leave the OEM system alone and have a complete separate one Yes that is the interior of the CLA D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-02-2014, 03:06 PM | #2742 |
Roadrunner Jr.
|
Do a bit ten. Save the p99 for later.
That bit ten is smaller than the deck and will allow you to keep the factory look which is nice. As for the w6.5, we have a limitation. The frequency response is 60-300 Hz. I'm looking at the AW6.5 right now with Jim. I'll keep you in the loop.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
04-02-2014, 03:31 PM | #2743 |
http://www.cadencesound.com/xam500-4bt/
Wonder how this amp would do in an sq setup. Bluetooth inputs ?
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
04-02-2014, 03:49 PM | #2744 |
Roadrunner Jr.
|
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
04-02-2014, 04:32 PM | #2745 |
The thing i'm wondering on that amp(cadence) is could you wire the speakers as well as run them wirelessly. So they could be hooked up to the factory deck (wired) p-99 (wirelessly) ?
Would a hi lo (LOC) put out a clean signal or would any sq be sacrificed ?
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
04-02-2014, 08:47 PM | #2746 |
Roadrunner Jr.
|
Okay...The BT is refrencing your phone. The speakers themselves won't be wireless.
That being said...there is a way to make it wireless, sort of. It's not worth the time except in home audio applications IMHO.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
04-03-2014, 09:25 AM | #2747 |
Only Happy When it Rains
|
Could the P99 fit in the armrest? I saw a build a long time ago where the builder kept everything looking stock, and could even run off of the stock head unit, but he had a switch with the good head unit and cd changer hidden in the arm rest.
__________________
Colin Chapman disciple |
04-04-2014, 12:03 AM | #2748 | |
Quote:
-Only good for a 2 way + Subwoofer right? -I can plug 2 sets (4 channel) of channels into Bit Ten... Front door speakers and front tweeters to get the signal from the MB head unit (MB=Mercedes Benz) the Bit Ten is going to de-equalize and then provide 3 channels out like L+R Midbass, L+R Tweeter, + Subwoofer -Does the Bit Ten has Left and Right EQ? -An finally... how much it costs? D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-04-2014, 12:11 AM | #2749 | |
Quote:
2- you really need to see the face of the deck specially when tuning, that means in "your regular driving position", when tuning you can't turn your head or move. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-04-2014, 12:48 PM | #2750 | |
Roadrunner Jr.
|
Quote:
http://www.audison.eu/index.php?page=product&id=42 Cost? 300-400. It's more effective than any analog piece from the 80-90s to be honest. You have the ability to see the entire crossover and EQ layout, the ability to make adjustments on the fly while seeing and hearing the effect pretty much instantly. You have time alignment as well. In the setup of the PC program, it should ask if you are using a two or three way. I can have Jim call you if you'd like.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
|
04-06-2014, 01:11 AM | #2751 | |
Quote:
Yes I would like to talk to him and go over details, Thanks. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
04-06-2014, 02:09 AM | #2752 |
I'm also interested in the...
ES3 "bit Energy Storage Start & Stop It prevents the processor from shutting down when turning on cars featuring the start & stop system When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If a signal processor (bit One, bit Ten) is installed in your car system, especially with cars featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables." D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
04-06-2014, 10:41 AM | #2753 |
Banned
Drives: 1nz-fe Join Date: Apr 2014
Location: usa
Posts: 39
|
The BIT 10 Does just about anything you can dream of. You would ultimately want the BIT 10D because it comes with the controller. In the end your head unit becomes nothing more than a play source. Think of it like your home unit DVD player, it just plays your dvd's and you A/V unit control's everything you plug in to it. The BIT is just that, it controls everything once plugged in to it. Which is why you need the controller from Audison as well. Also if you look at my thread (Making it count) it shows the BIT 10D with controller.
|
04-06-2014, 02:25 PM | #2754 |
Roadrunner Jr.
|
What NT is talking about is the DRC to the Bit products.
When I used the bit one, the DRC was more of an afterthought. I used my laptop more often. Still, if you have multiple settings, that DRC does allow control for various settings which can be convenient. If one is to buy a Bit product, it would be wise to also go through the Bit Tune process at your local shop.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sound deadening: sq footage amount for 3dr | goku87 | In Car Entertainment + Electronics (audio / video / alarm) | 29 | 11-14-2013 12:37 PM |
2007 Yaris S Sound Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 70 | 12-13-2010 07:40 PM |
Sound deadening | 06vitzRS | General Yaris / Vitz Discussion | 10 | 05-05-2010 01:51 PM |
Sedan Door Panel Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 42 | 06-01-2009 02:47 PM |