|
02-02-2015, 01:09 PM | #19 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Toyota does sell the replacement filters (and the cover bolt), but they are easy enough to clean. If you stripped it you will have to use an extractor to get it out.
__________________
|
02-02-2015, 01:10 PM | #20 |
Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2015
Location: Virginia Beach, Virginia
Posts: 46
|
Do you have a p/n for that bolt?
|
02-02-2015, 01:12 PM | #21 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
I'm not where I have access to that today. Your Toyota parts dept can easily look it up for you.
__________________
|
02-02-2015, 01:14 PM | #22 |
Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2015
Location: Virginia Beach, Virginia
Posts: 46
|
Right on I'm gonna check that sensor tonight and let you know. Anything else I should check?
|
02-02-2015, 03:16 PM | #23 |
Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2015
Location: Virginia Beach, Virginia
Posts: 46
|
I checked the resistance of the camshaft position sensor and I get 1.172k Ω cold. The manual says that is should read 1,630 to 2,740 Ω cold. So maybe the camshaft sensor is keeping it from starting? The first one went bad because of oil and the one from advance was bad all along... The resistance of the crankshaft position sensor is 1.371k Ω cold which is in specs for a good sensor.
|
|
|