2009 sedan Foglight install help

[Portugal329]

im in the process of installing fogs in my 09 sedan i have the light stalk and oem relay im trying to install the wires in the box under the hood im just trying to figure out if each seperate +wire goes into the harness or can i connect them together and then split into the harness hole 1+2. Im talking about the microimage install kit thanks

[CTScott]

You want to use both pins 1 and 2. From there you can common both together with both of the fog light positive wires, but the key is using both terminals in the fuse box connector to distribute the current draw between two pins, as one alone is not rated for the current of both bulbs.

[Portugal329]

Ok so the +wire from the left fog goes into pin 1 and the +wire from the right fog goes into pin 2 or vice versa correct?

[Portugal329]

Ok i reread your answer and i understand now thank you for your reply this will be my project for next week again thank you very much