Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Wash, Wax, Detailing, Exterior Repairs
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 01-08-2016, 02:20 AM   #1
bairjo
 

Join Date: Feb 2010
Posts: 606
3M Clear Bra Install

I did a video of the installation of the 3M Clear Bra on my 2010. This really is not a DIY or "how to" video....my intension was to show you what is involved when doing this in an effort to help anyone considering this install.

I have had critics of my other videos complain about the boring music I have used....well, you may want to mute this one!

https://www.youtube.com/watch?v=Xw7WGLzaAxk
bairjo is offline   Reply With Quote
Old 01-08-2016, 08:45 AM   #2
Bluevitz-rs
1NZ-6spd
 
Bluevitz-rs's Avatar
 
Drives: '05 6-Spd Vitz RS
Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
Bluevitz-rs is offline   Reply With Quote
Old 01-09-2016, 12:32 PM   #3
bairjo
 

Join Date: Feb 2010
Posts: 606
Here are some older photos from when I used the bulk roll of the film to cover the entire hood, with just a little in the back corners that didn't get covered. See the arrow in the photo. I used the leftovers to do the fenders and edges of the door.

1b.jpg

2.JPG

11.JPG
bairjo is offline   Reply With Quote
Old 01-10-2016, 02:38 AM   #4
bairjo
 

Join Date: Feb 2010
Posts: 606
Well now, what a dud of a thread this turned out to be. Based on the lack of conversation here, the fear of the low quality Yaris paint must be unfounded. Otherwise I thought there would be some questions here on how to preserve ones Yaris paint like I have done the last 95,000 miles without a blemish. Really folks, it won't be another month till someone is on here is chirping about "how to fix stone chips" in their paint...Prevention is the answer man...but what do I know...it may be better to collect a bunch of chips and have it repainted for the same cost of prevention.
bairjo is offline   Reply With Quote
Old 01-10-2016, 08:35 AM   #5
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
I like the idea of protecting the hood as it is prone to damage.

I just use paint sealant 3x a year and always use a touch up pen to fill in any paint chips on the hood. For the bumper, it's plastic so i'm not concerned sinc it can't rust.

I figured by the time my hood is damaged enough an starts to rust (if it ever does) an '08 Yaris hood would be easy to find at a scrapyard and i'll just get it painted and install it on my car.
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 01-10-2016, 06:30 PM   #6
bairjo
 

Join Date: Feb 2010
Posts: 606
Quote:
Originally Posted by tmontague View Post
I like the idea of protecting the hood as it is prone to damage.

I figured by the time my hood is damaged enough an starts to rust (if it ever does) an '08 Yaris hood would be easy to find at a scrapyard and i'll just get it painted and install it on my car.

I guess it is a pay me now or pay me later kinda thing. I prefer to do the pay me now and always have the car looking like the day I bought it, rather than let it get increasing speckled and still end up paying for someone else's chipped up used hood which most likely won't match. But I can see your point...
bairjo is offline   Reply With Quote
Old 01-10-2016, 07:39 PM   #7
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
Quote:
Originally Posted by bairjo View Post
I guess it is a pay me now or pay me later kinda thing. I prefer to do the pay me now and always have the car looking like the day I bought it, rather than let it get increasing speckled and still end up paying for someone else's chipped up used hood which most likely won't match. But I can see your point...
I tend to go with that train of thought with almost every part on my car as I agree, being proactive is better than reactive and usually cheaper.

That being said, based on how my hood is looking after the 4 years I've had it I can honestly say that even though I want to make it a 20 year car I don't think it'll rust out on the hood. I get it Krown'd every spring and am constantly checking the paint and protecting it.

It may be a gamble and like you said could cost me more down the road, but for now I've been able to put my cash into fun filled smile parts which has me loving my car every time I get in it. And by then I may even splurge for a carbon fibre hood, we'll have to see...

btw, where'd you purchase the 3m vinyl from and was it Yaris specific?
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 01-10-2016, 08:39 PM   #8
bairjo
 

Join Date: Feb 2010
Posts: 606
There are a number of suppliers for the 3M. I purchased the 24" bulk roll about 5 years ago for the hood from a supplier called Cleardefender at the time. And for the bumper I purchased a pre cut pattern. I did it over a year ago after my bumper was replaced from an accident and don't recall who I ended up buying from. I'm actually at work right now so I can't look it up. However, I just priced them all out on line. There is no way you could do the bumper with the bulk roll material.....even the pro installers don't do that.


Carbon fiber hood?...now that does sound sweet...
bairjo is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
diy HID projector w/ halo headlight install tmontague DIY / Maintenance / Service 17 02-04-2016 11:34 AM
how do I install a different headunit in 2006 yaris? wouterw In Car Entertainment + Electronics (audio / video / alarm) 10 05-13-2013 07:55 AM
Install shifttronic packetrace Cosmetic Modifications (Exterior/Interior) 1 10-01-2010 02:51 PM
Dealers are refusing to install cruise control xenu General Yaris / Vitz Discussion 12 07-17-2010 12:49 AM
Any front bumper/ hood stone chip issues? Where could I get Clear Bra kit? tifosi360 General Yaris / Vitz Discussion 9 08-07-2006 02:43 PM


All times are GMT -4. The time now is 06:53 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.