|
07-07-2016, 12:41 AM | #1 |
Drives: 2014 Yaris SE Join Date: Apr 2014
Location: NYC
Posts: 1,076
|
Threaded oil fill funnel
I was wondering if anybody here has used one of these specifically on the 1NZ-FE.
https://www.amazon.com/Assenmacher-S.../dp/B002YKETS8 https://www.amazon.com/gp/product/B0..._d0_g263_i1_sh A little pricey but seems like a good idea. However it appears that maybe the Assenmacher requires an additional adaptor for our vehicles while the Motivx definitely does but its unclear if it actually comes with it. Would really like to hear from someone who has actually used one. |
09-06-2016, 05:31 PM | #2 |
Drives: 2014 Yaris SE Join Date: Apr 2014
Location: NYC
Posts: 1,076
|
I decided to not buy either. After searching around online I came across several posts claiming that the threads on a Mobil 1 quart container match the threads on Toyota oil fill caps. It's true as you can see. Cut about 3 1/2 inches from the bottom of the container and it will clear the overhang of the ventilation intake. Voilą instant funnel.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
Yaris Oil Change DIY | rningonfumes | DIY / Maintenance / Service | 91 | 01-11-2019 07:18 PM |
***The Engine Oil Bible*** | Hussain-Vtec | Performance Modifications | 20 | 09-28-2016 02:47 PM |
A Mystery Oi'll Say! | Yar Is Word | Fuel Economy Forum | 16 | 05-11-2013 04:22 AM |
Motor oil debate - interesting info but a long read. | mikeukrainetz | General Yaris / Vitz Discussion | 6 | 12-10-2006 08:16 PM |