Australian yaris mods!! - Page 2 - Toyota Yaris Forums

lamdog · 11-08-2008, 06:43 AM

Quote:

Originally Posted by ruimond

Haha cool. I go around there fairly often. Have u done anything to your yaris lamdog?

front top strut bar, rear sway bar, AFE intake, headlight eyelids
de-badged Yaris and Toyota Emblems to be I'LL and Vitz and also put TRD emblem on the back. i also put few TRD stickers on my car, door handles and front windscreen.
thinking to get the yaris lowered and change 17 or 16 inches rims.

lamdog · 11-08-2008, 06:45 AM

i will take some pics of my car when i have my camera back from my friend.

ruimond · 11-08-2008, 09:18 AM

Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it.

Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine.

lamdog · 11-08-2008, 10:13 AM

Quote:

Originally Posted by ruimond

Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it.

Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine.

i took the car to shop to do, bcos i do not have tools at home.
by the way, i have also got short shift kit and underdrive pulley on...
after installing underdrive pulley, the car seems to have more power than installing the intake. it is more noticeable.

i can let u to look at intake if u want :P i am free most of the time after work.
i also got the car tinted, the darkest legal tint, of cos, i wanted to have a darker tint, but i do not want to get pulled over.hahaaa

CTScott · 11-08-2008, 01:56 PM

Quote:

Originally Posted by ruimond

Mods: 17inch Wheels ANZ Tazer , Pedders Lowering Springs, NST Short Shifter

Those stripes look awesome. Are they paint or vinyl?

ruimond · 11-08-2008, 09:50 PM

Quote:

Originally Posted by lamdog

i took the car to shop to do, bcos i do not have tools at home.
by the way, i have also got short shift kit and underdrive pulley on...
after installing underdrive pulley, the car seems to have more power than installing the intake. it is more noticeable.

i can let u to look at intake if u want :P i am free most of the time after work.
i also got the car tinted, the darkest legal tint, of cos, i wanted to have a darker tint, but i do not want to get pulled over.hahaaa

Haha ok we can organise a meet up if you want, interested to see the intake sound and stuff :P I'm free usually monday or thursday or the weekend lol.

CTScott - The stripes are vinyl not painted, it was on the car originally when i bought it from the dealer.

lamdog · 11-09-2008, 12:49 AM

Quote:

Originally Posted by ruimond

Haha ok we can organise a meet up if you want, interested to see the intake sound and stuff :P I'm free usually monday or thursday or the weekend lol.

CTScott - The stripes are vinyl not painted, it was on the car originally when i bought it from the dealer.

no problem. i am free today, if u want... i stay in riverton.

ruimond · 11-09-2008, 01:03 AM

Quote:

Originally Posted by lamdog

no problem. i am free today, if u want... i stay in riverton.

Hehe i was just past that direction on the way to fremantle just then. I don't mind meeting you somewhere if you want, where abouts would be good.

lamdog · 11-09-2008, 01:06 AM

Quote:

Originally Posted by ruimond

Hehe i was just past that direction on the way to fremantle just then. I don't mind meeting you somewhere if you want, where abouts would be good.

anywhere as long as south of the river would be fine :P
lol~~~~ i have nothing to do today

ruimond · 11-09-2008, 01:10 AM

Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol

FA7 · 11-09-2008, 01:11 AM

here is my yaris, the only "mod" is the stripe..... will be getting a 22mm solid rear axle, rims, lowered and maybe a few other things sometime next year

lamdog · 11-09-2008, 01:14 AM

Quote:

Originally Posted by ruimond

Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol

yeah.... can.. pm me to confirm.. i live very near to the shopping centre there.
meet u at around 2:30?

ruimond · 11-09-2008, 01:16 AM

check pm.

lunjiaow · 11-15-2008, 07:03 AM

Well finally got my YR on Friday.

From then till now. I have installed my sound system. rims and 20grade tint.

Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

saspy · 11-16-2008, 03:33 AM

If you want, i'am selling my lowered springs, its TANABE DF210 very popular spring among the community cant buy it in aus, japanese made

google it.

i bought it from the US and had it sended to here.

DerKaiZeRs · 11-16-2008, 11:55 AM

Quote:

Originally Posted by lunjiaow

Well finally got my YR on Friday.

From then till now. I have installed my sound system. rims and 20grade tint.

Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

hi..
where have u install your sound system? and How much it cost?

btw, I bought 7" HU for my yaris.. and apparently it seems not fit with the dash panel. any suggestion what should I do...

lunjiaow · 11-16-2008, 06:07 PM

hey,
I installed it myself. my one is a single din dvd with a pop out screen.
You may need a dash kit which i bought from Strathfield. Its to fill out the sides of the deck.
Will get pics later.

DerKaiZeRs · 11-17-2008, 01:36 AM

Do you think they have a custom made dash kit for double din 7"??

uhm, btw.. how much you money do you spend on 20grade tint and where did u do that?

11-08-2008, 09:18 AM	#21
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it. Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-09-2008, 01:10 AM	#28
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-09-2008, 01:16 AM	#31
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	check pm. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
News : 2007 Toyota Yaris - the little Euro's official arrival	VitzBoy	General Yaris / Vitz Discussion	9	06-06-2017 01:51 AM
Consumer Reports not too pleased with Yaris	Befuddled	General Yaris / Vitz Discussion	132	02-28-2011 03:57 PM
New Yaris Owner	Kiteless	General Yaris / Vitz Discussion	8	08-03-2006 12:48 AM

11-08-2008, 06:45 AM	#20
lamdog View User's Garage Drives: Yaris YRX Join Date: Oct 2008 Location: Perth Australia Posts: 29	i will take some pics of my car when i have my camera back from my friend.

11-09-2008, 01:11 AM	#29
FA7 Drives: 2008 YR 5 door Join Date: Nov 2008 Location: Adelaide, Australia Posts: 10	here is my yaris, the only "mod" is the stripe..... will be getting a 22mm solid rear axle, rims, lowered and maybe a few other things sometime next year

11-15-2008, 07:03 AM	#32
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Well finally got my YR on Friday. From then till now. I have installed my sound system. rims and 20grade tint. Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

11-16-2008, 03:33 AM	#33
saspy Drives: Toyota Yaris Join Date: Oct 2008 Location: DownUnder Posts: 74	If you want, i'am selling my lowered springs, its TANABE DF210 very popular spring among the community cant buy it in aus, japanese made google it. i bought it from the US and had it sended to here.

11-16-2008, 06:07 PM	#35
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	hey, I installed it myself. my one is a single din dvd with a pop out screen. You may need a dash kit which i bought from Strathfield. Its to fill out the sides of the deck. Will get pics later.

11-17-2008, 01:36 AM	#36
DerKaiZeRs -YaRiS OwNeR- Drives: YRS Sedan Join Date: Oct 2008 Location: Perth WA Posts: 58	Do you think they have a custom made dash kit for double din 7"?? uhm, btw.. how much you money do you spend on 20grade tint and where did u do that?