My 2011 Vitz

[TerenceCruz]

Originally Posted by ezhacker1

Yep, chrome/polished wheels look best on black cars. Have you seen Martin's new wheels?

Thanks man! As soon as I get a legit fender roll lets meet up and take some pics! And no I havent man, what wheels did he get??

[ezhacker1]

I want to go down to 16s now so bad.

[TerenceCruz]

Originally Posted by ezhacker1

I want to go down to 16s now so bad.

Yeah man I love 16s haha. What wheels did Martin get?

[TerenceCruz]

Last night I got a better fender roll done, and adjusted ride height to fix the reverse rake a little bit. Took her to get aligned today, and gave her a fresh wash :) Threw on some TRD valve stem caps, and I might throw on some 5mm spacers on in the rear as well.






Some of my friends like the rear tuckage, I kinda want the ride height to be level. If anything it's okay if my rear is a little higher, but that's still not the case right now since I'm only on the spring in the rear haha.

[TerenceCruz]

Would anyone happen to know if I can use 65mm ID coil springs on my fronts if my Megan coils use 62mm ID coil springs? I know the rear doesn't matter as much since it should work as long as it fits on the perch/locking rings (If I end up using the locking rings), but I know in the front it'll go over the strut and locking rings.

EDIT: Nevermind, just going to suck it up and save for Swift springs. I WAS looking for a cheaper alternative, but hey, there's a reason why they're so expensive. Plus, I know the Swift springs work really well with Megan coilovers (via the internet) haha.

[TerenceCruz]

Okay, does anyone happen to know where I could just buy projector headlights with the single projector? I'm not a fan of the dual angel eye ones we see all the time, I really want to find some like this.

https://www.google.com/search?q=toyo...73%3B700%3B467

I know I can retrofit a projector, but I'm curious if I can just buy a smoked set.. Heh :D

[yarisugi]

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

[TerenceCruz]

Originally Posted by yarisugi

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

Ahh man, I was on Instagram talking to some guys from Indonesia, I guess they got theirs from a supplier called Bixenon, but I'm pretty sure you can't buy the headlights like that.. But thanks man, I try! If I get a spare set of headlights I might try it out. I read PETERPOOP's write up, and I just feel like I would get so lost without someone there to help hahah.

[TerenceCruz]

Oh yeah guys, some other small updates. Kind of. Lol

Added a 10mm hub spacer, and washers on the rear lower hub bolts to get negative camber. So far so good.




Also added my bumper quick release

[TerenceCruz]

Originally Posted by yarisugi

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

Btw, Sevenism's customer got exactly what I wanted *drool* That's perfect..

[MiSFiTx87]

vitz looking good as always. is easy to install the bumper quick release?

[TerenceCruz]

Originally Posted by MiSFiTx87

vitz looking good as always. is easy to install the bumper quick release?

Thanks man! Yes it is. Watched a quick 2 minute video on youtube to get the right size drill bit. Only hard part was figuring out how far to space the two out to get the band tight enough.

[TerenceCruz]

Moar pics for sh*ts and giggles :D Sorry for the picture wh0ring lol.

[WorkTL]

Sick! I need that camber in the rear... how did you get it so stanced? -4?

[yarisugi]

Answer on post #351 - washers on bottom half of hub bolts.

[TerenceCruz]

Originally Posted by WorkTL

Sick! I need that camber in the rear... how did you get it so stanced? -4?

Thanks a lot man! And yes as Sugi said, 3 washers each on the two lower hub bolts. I added an extra washer on the left front side hub bolt in an attempt to fix toe in.

Originally Posted by yarisugi

Answer on post #351 - washers on bottom half of hub bolts.

Thanks for that Sugi!

[TerenceCruz]

Also, Valentine's Day gift from my girlfriend. Sorry I can't resize on my phone, I'll do it later lol. Big picture printed of my car, along with a mini version haha. Too bad they don't come in 2 doors, but I love it regardless! She's the best.

[yarisugi]

I like that framed picture of your car!
Who took the shot?