Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 01-20-2009, 11:27 PM   #73
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by Tiddlygoose View Post
OK, so I followed the first mod as CTScott knows... Then I followed the corrected 2nd version of the mod. I Left the first switch in the on position, Added a second push button switch with the 3 150 ohm resistors and it worked right up until the time I got up to highways speed. Then the darned light came back on. No amount of changing either switch changes anything at all.

Question. Can the dealer disable the entire TPMS system, even if it costs me? Has anyone had that done or know anything? I always check my own damed tires. I've never had anything like this to fall back on before and with my tire switching situation I'd just as soon loose TPMS all together at this point.
The dealer can't disable it.

Can you take some pictures of your wiring, so I can help you troubleshoot it?

Mine has been running fine disabled (no light) since I posted the updated version on 11/30/08.
CTScott is offline   Reply With Quote
Old 01-20-2009, 11:52 PM   #74
blacksandiegovitz
Your mom goes to college
 
blacksandiegovitz's Avatar
 
Drives: 08 Vitz
Join Date: Oct 2008
Location: Just chillin' out brah !
Posts: 1,434
Quote:
Originally Posted by CTScott View Post
The dealer can't disable it.

Can you take some pictures of your wiring, so I can help you troubleshoot it?

Mine has been running fine disabled (no light) since I posted the updated version on 11/30/08.
I haven't even ef'd with the fix yet. I got just about every damn warning light on cause I switched steering wheel , rims, seats, seatbelts. At this point its probaly just easier for me to pull out the gauge cluster and pull the light bulbs out , Lol.
blacksandiegovitz is offline   Reply With Quote
Old 01-21-2009, 07:20 PM   #75
Tiddlygoose
 
Tiddlygoose's Avatar
 
Drives: 2009 Honda Civic Sedan SI
Join Date: Oct 2008
Location: New Hampshire
Posts: 54
Quote:
Originally Posted by CTScott View Post
The dealer can't disable it.

Can you take some pictures of your wiring, so I can help you troubleshoot it?

Mine has been running fine disabled (no light) since I posted the updated version on 11/30/08.
Cool, I appreciate it. I think at this point I shall wait until it warms up above freezing. I nearly got frostbite on my fingers when I did this a few weeks ago... I will live with the light for now.
Tiddlygoose is offline   Reply With Quote
Old 01-23-2009, 09:46 AM   #76
linny
 
Drives: '08 liftback mt
Join Date: Nov 2008
Location: Mn
Posts: 39
I am still happily driving around TPWS light FREE!! I followed the 150 ohm procedure without a switch.
linny is offline   Reply With Quote
Old 01-24-2009, 12:36 PM   #77
ivanmadeline
 
ivanmadeline's Avatar
 
Drives: 2008 Yaris (Sedan)
Join Date: Oct 2008
Location: NC
Posts: 61
Quote:
Originally Posted by linny View Post
I am still happily driving around TPWS light FREE!! I followed the 150 ohm procedure without a switch.

Like Linny Still no light
ivanmadeline is offline   Reply With Quote
Old 02-25-2009, 11:40 PM   #78
ricktoyota73
 
ricktoyota73's Avatar
 
Drives: 2014 Yaris 3-Door
Join Date: Oct 2008
Location: Kalamazoo, MI
Posts: 33
Ok, so on a new project, I should use 130 ohm resistors, correct?
I have a bunch of 20 guage wire. Is that ok to use?
CTScott...how did you figure this shit out?
I have been working in the parts department of car dealers for the last 10 years and, from the things I've seen over the years, you never want to cut the factory wire harness. I will definitely leave enough wire where I can reconnect the SOB, but it still scares the crap out of me. It will be worth it to get rid of the cursed light, though.
ricktoyota73 is offline   Reply With Quote
Old 02-25-2009, 11:58 PM   #79
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by ricktoyota73 View Post
Ok, so on a new project, I should use 130 ohm resistors, correct?
I have a bunch of 20 guage wire. Is that ok to use?
CTScott...how did you figure this shit out?
I have been working in the parts department of car dealers for the last 10 years and, from the things I've seen over the years, you never want to cut the factory wire harness. I will definitely leave enough wire where I can reconnect the SOB, but it still scares the crap out of me. It will be worth it to get rid of the cursed light, though.
110 to 150 ohm resistors will work - Just make sure they are 1/2 Watt.

Cutting into factory harnesses can be dangerous if you don't know what you are doing. I design more complex systems for a living, so I enjoy reverse engineering automotive systems.
CTScott is offline   Reply With Quote
Old 02-26-2009, 04:41 PM   #80
ricktoyota73
 
ricktoyota73's Avatar
 
Drives: 2014 Yaris 3-Door
Join Date: Oct 2008
Location: Kalamazoo, MI
Posts: 33
Quote:
Originally Posted by CTScott View Post
110 to 150 ohm resistors will work - Just make sure they are 1/2 Watt.

Cutting into factory harnesses can be dangerous if you don't know what you are doing. I design more complex systems for a living, so I enjoy reverse engineering automotive systems.
I sell auto parts and I honestly don't understand how half of this stuff works!
Thanks for the info. Hooking it up as soon as we get a weekend above freezing and I can stand to be out in the garage for a while.
ricktoyota73 is offline   Reply With Quote
Old 03-17-2009, 08:09 PM   #81
ricktoyota73
 
ricktoyota73's Avatar
 
Drives: 2014 Yaris 3-Door
Join Date: Oct 2008
Location: Kalamazoo, MI
Posts: 33
Just curious, if I'm not putting in a switch and don't care if I ever enable the system again, can I just cut and connect the wires to the resistor package instead of using tap splices?
ricktoyota73 is offline   Reply With Quote
Old 03-17-2009, 08:24 PM   #82
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by ricktoyota73 View Post
Just curious, if I'm not putting in a switch and don't care if I ever enable the system again, can I just cut and connect the wires to the resistor package instead of using tap splices?
Yes you can.

I wrote it up with use of the tap splices keeping in mind that many people are not comfortable soldering under the dash (and in relatively close proximity to the passenger air bag).
CTScott is offline   Reply With Quote
Old 03-17-2009, 09:07 PM   #83
ricktoyota73
 
ricktoyota73's Avatar
 
Drives: 2014 Yaris 3-Door
Join Date: Oct 2008
Location: Kalamazoo, MI
Posts: 33
So, just using butt connectors not a good idea (uh huh huh huh...I said "butt" huh huh)?
ricktoyota73 is offline   Reply With Quote
Old 03-17-2009, 09:15 PM   #84
mikenacarato
SIPNDEW
 
mikenacarato's Avatar
 
Drives: 15 STI
Join Date: Oct 2008
Location: Brentwood, TN
Posts: 2,281
Send a message via AIM to mikenacarato
Quote:
Originally Posted by ricktoyota73 View Post
Just curious, if I'm not putting in a switch and don't care if I ever enable the system again, can I just cut and connect the wires to the resistor package instead of using tap splices?
thats what i did and it works fine, i even removed both TPMS modules, one under the dash and one in the paneling behind the trunk. theres a good .02 lbs and weight saved!
mikenacarato is offline   Reply With Quote
Old 03-17-2009, 09:18 PM   #85
ricktoyota73
 
ricktoyota73's Avatar
 
Drives: 2014 Yaris 3-Door
Join Date: Oct 2008
Location: Kalamazoo, MI
Posts: 33
Funny about the weight savings!
ricktoyota73 is offline   Reply With Quote
Old 03-17-2009, 09:28 PM   #86
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by ricktoyota73 View Post
So, just using butt connectors not a good idea (uh huh huh huh...I said "butt" huh huh)?
Butt connectors are fine - Just don't use big ones (unless you like that kind of thing...)
CTScott is offline   Reply With Quote
Old 03-23-2009, 04:57 AM   #87
regal
 
Drives: 09 Yaris 3 Dr White LB
Join Date: Mar 2009
Location: PA
Posts: 432
When doing this will there still be an OBDII code? I ask because to pass emissions in PA you can't have any OBDII codes.
regal is offline   Reply With Quote
Old 03-23-2009, 07:47 AM   #88
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by regal View Post
When doing this will there still be an OBDII code? I ask because to pass emissions in PA you can't have any OBDII codes.
The TPWS does not report codes over OBDII, so you should be fine. It's data is accessible over the CAN bus, but a Toyota specific communication tool is required to access the data.
CTScott is offline   Reply With Quote
Old 04-13-2009, 05:55 PM   #89
AznGouki
Metsu
 
Drives: NCP91 ; E36
Join Date: Oct 2008
Location: Calgary
Posts: 154
Does every yaris have it? I have the base with no AC 08. Any way to verify before I start looking for the module?
__________________
AznGouki is offline   Reply With Quote
Old 05-19-2009, 05:17 PM   #90
Taiyaki
アキバ製
 
Taiyaki's Avatar
 
Drives: 09' White LB, Celica GTS
Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
Ok so to get rid of it without a switch all you have to do it start off with the light not on, turn off the car, unplug the thing, and cut the green and brown wire and connect them to eachother, and leave the harness unplugged?
Taiyaki is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tire pressure sensors Tink1 Wheels, Tires and Suspension Forum sponsored by The Tire Rack 11 10-21-2008 05:53 PM
Intake Systems Decision Maker.. Blenjar Performance Modifications 25 09-15-2007 10:07 PM
The Tire inflation debate... Tankota General Yaris / Vitz Discussion 20 06-01-2006 07:09 PM


All times are GMT -4. The time now is 07:18 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.