DIY Cruise Control FAQ (2006-2010 Yaris) - Page 6 - Toyota Yaris Forums

CTScott · 01-10-2011, 04:07 PM

Quote:

Originally Posted by frankmontreal

hi! same as teddy 06 canadian yaris, called the junk yard they got the stick with cable for 30$, so from what i understand the rest of the stuff from you scott?

Nice price on the stalk with wire.

I do have the pins that you'll need to complete the stalk wiring. Here's the link to my thread, which has pictures of the pins, but you need the three pins (ECM connector pin and two pins for connector D3) to wire up your stalk:

http://www.yarisworld.com/forums/sho...ht=cruise+pins

bairjo · 01-15-2011, 12:52 AM

Stalk 84632-34011 on ebay today for 19.95. 10 available. Do your search by typing yaris cruise control. If you type the part number it will not show up.

ibanezjeepguy · 01-15-2011, 09:39 AM

haha, 15 to 30 days shipping..... I guess its worth the wait ?
I just scored a nice factory stereo off ebay recently, good find as well

bairjo · 01-15-2011, 10:56 AM

It's worth the wait for me as I am in the process of breaking in my new yaris. I'm trying to vary the speed during my 30 mile commute each way. Not a bad little break in drive each day. I have read that setting your speed with cruise and forgetting about during break in is the worst thing to do. So I can wait....

kimjo · 02-26-2011, 10:29 PM

Quote:

Originally Posted by ibanezjeepguy

haha, 15 to 30 days shipping..... I guess its worth the wait ?
I just scored a nice factory stereo off ebay recently, good find as well

I got mine in 22 days looks good and the wires from ctscott

ibanezjeepguy · 01-15-2011, 11:04 AM

the way engines are built today they can be broken in with less than a weeks worth of driving

bairjo · 01-16-2011, 01:48 AM

One week of driving how many miles? Based on your reply you and I agree the car needs a break in. Just how many miles is in question. I understand why you feel that one week is good enough. The tolerances of todays cars are much tighter due to improved capabilties of machining or grinding equipment. However, that is on paper and not what is always held and passed on the shop floor. Even with a 100% inspection process, marginal product will get passed. Therefore, I have chosen to go the time proven break in process for piece of mind. It doesn't cost me anything so why not do it?
Since this is a thread on cruise control we probably should look for a thread on break in peroid for any further discusion on that subject. In the mean time, I'll be waiting for my cruise control stalk to arrive.

ibanezjeepguy · 01-16-2011, 07:34 AM

true that man, maybe a mod should wipe these last couple posts...
post back with how your stalk install goes and if you have any problems.

Buddy Fan · 01-24-2011, 11:35 AM

Went to the dealer to order the stalk wire and clutch switch and was told they changed the part number for the cc stalk wire to 84633-02020. Hope this helps anyone planning this DIY.

CTScott · 01-24-2011, 12:17 PM

Quote:

Originally Posted by Buddy Fan

Went to the dealer to order the stalk wire and clutch switch and was told they changed the part number for the cc stalk wire to 84633-02020. Hope this helps anyone planning this DIY.

Thanks for the heads-up. I updated the thread with that info and have confirmed it via the EPC.

What's the latest pricing on the stalk, wire, and clutch switch?

Buddy Fan · 01-25-2011, 08:42 PM

I'll have to get you exact numbers, but it was in the range of $45 to $50 for both.

ibanezjeepguy · 01-24-2011, 10:23 PM

same thing happened to me a couple months ago... the dealer can easily see the older numbers. even toyota parts zone or comparable sites list the new and old numbers I believe.

yarisbird · 01-25-2011, 04:35 PM

I just completed the installation of cruise control in my 07 hatchback using the oem stalk that I purchased from e-bay and the cruise indicator module/light and wires/pins from CTScott. The cruise control works great.

Only problem is with the indicator light. It turns on for one second when the ignition switch is turned on, but when the cruise control is turn on there is no light. I installed it according to the instructions using splice tap connectors. All of the connections are tight.

CTScott, is there any diagnostic check that you recommend to determine why the light doesn't turn on when the cruise switch is pressed? I have a digital multimeter if that helps. Thanks for all your help.

CTScott · 01-25-2011, 04:40 PM

Quote:

Originally Posted by yarisbird

I just completed the installation of cruise control in my 07 hatchback using the oem stalk that I purchased from e-bay and the cruise indicator module/light and wires/pins from CTScott. The cruise control works great.

Only problem is with the indicator light. It turns on for one second when the ignition switch is turned on, but when the cruise control is turn on there is no light. I installed it according to the instructions using splice tap connectors. All of the connections are tight.

CTScott, is there any diagnostic check that you recommend to determine why the light doesn't turn on when the cruise switch is pressed? I have a digital multimeter if that helps. Thanks for all your help.

Just to verify:

The blue wire is connected to the wire that goes to the ECM pin and one of the wires going to the stalk?

The white wire is connected to ignition switched power?

The black wire is connected to ground?

yarisbird · 01-25-2011, 04:51 PM

Yes.

The blue wire is spliced into the wire that runs from the ecm to the connector under the steering wheel. (pin #1)

The black wire is spliced to the wire that runs from this connector (pin#2) to ground.

The white wire is spliced to the pink wire on the connector under the ignition switch.

CTScott · 01-25-2011, 08:37 PM

Quote:

Originally Posted by yarisbird

Yes.

The blue wire is spliced into the wire that runs from the ecm to the connector under the steering wheel. (pin #1)

The black wire is spliced to the wire that runs from this connector (pin#2) to ground.

The white wire is spliced to the pink wire on the connector under the ignition switch.

OK. There is something wrong with the module. PM me you shipping address again, and I'll ship you a replacement.

Yarisonline · 01-27-2011, 11:41 AM

Hey, I suggest trying to find that part at www.yarisparts.com ,that's where I get my parts at warehouse price. Good luck :)

CTScott · 01-27-2011, 12:01 PM

Quote:

Originally Posted by Yarisonline

Hey, I suggest trying to find that part at www.yarisparts.com ,that's where I get my parts at warehouse price. Good luck :)

I was just curious as to what the going price is, as I picked up a couple recently for less than wholesale, that I can offer for $40 shipped.

01-24-2011, 11:35 AM	#9
Buddy Fan Drives: 2010 Yaris 3 door Join Date: Feb 2010 Location: Parma, OH Posts: 53	Went to the dealer to order the stalk wire and clutch switch and was told they changed the part number for the cc stalk wire to 84633-02020. Hope this helps anyone planning this DIY. __________________

01-25-2011, 08:42 PM	#11
Buddy Fan Drives: 2010 Yaris 3 door Join Date: Feb 2010 Location: Parma, OH Posts: 53	I'll have to get you exact numbers, but it was in the range of $45 to $50 for both. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 10:12 PM

01-15-2011, 12:52 AM	#2
bairjo Join Date: Feb 2010 Posts: 603	Stalk 84632-34011 on ebay today for 19.95. 10 available. Do your search by typing yaris cruise control. If you type the part number it will not show up.

01-15-2011, 09:39 AM	#3
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	haha, 15 to 30 days shipping..... I guess its worth the wait ? I just scored a nice factory stereo off ebay recently, good find as well

01-15-2011, 10:56 AM	#4
bairjo Join Date: Feb 2010 Posts: 603	It's worth the wait for me as I am in the process of breaking in my new yaris. I'm trying to vary the speed during my 30 mile commute each way. Not a bad little break in drive each day. I have read that setting your speed with cruise and forgetting about during break in is the worst thing to do. So I can wait....

01-15-2011, 11:04 AM	#6
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	the way engines are built today they can be broken in with less than a weeks worth of driving

01-16-2011, 01:48 AM	#7
bairjo Join Date: Feb 2010 Posts: 603	One week of driving how many miles? Based on your reply you and I agree the car needs a break in. Just how many miles is in question. I understand why you feel that one week is good enough. The tolerances of todays cars are much tighter due to improved capabilties of machining or grinding equipment. However, that is on paper and not what is always held and passed on the shop floor. Even with a 100% inspection process, marginal product will get passed. Therefore, I have chosen to go the time proven break in process for piece of mind. It doesn't cost me anything so why not do it? Since this is a thread on cruise control we probably should look for a thread on break in peroid for any further discusion on that subject. In the mean time, I'll be waiting for my cruise control stalk to arrive.

01-16-2011, 07:34 AM	#8
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	true that man, maybe a mod should wipe these last couple posts... post back with how your stalk install goes and if you have any problems.

01-24-2011, 10:23 PM	#12
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	same thing happened to me a couple months ago... the dealer can easily see the older numbers. even toyota parts zone or comparable sites list the new and old numbers I believe.

01-25-2011, 04:35 PM	#13
yarisbird View User's Garage Drives: 2007 Yaris HB Bayou Blue Join Date: Jul 2007 Location: Cypress, CA Posts: 22	I just completed the installation of cruise control in my 07 hatchback using the oem stalk that I purchased from e-bay and the cruise indicator module/light and wires/pins from CTScott. The cruise control works great. Only problem is with the indicator light. It turns on for one second when the ignition switch is turned on, but when the cruise control is turn on there is no light. I installed it according to the instructions using splice tap connectors. All of the connections are tight. CTScott, is there any diagnostic check that you recommend to determine why the light doesn't turn on when the cruise switch is pressed? I have a digital multimeter if that helps. Thanks for all your help.

01-25-2011, 04:51 PM	#15
yarisbird View User's Garage Drives: 2007 Yaris HB Bayou Blue Join Date: Jul 2007 Location: Cypress, CA Posts: 22	Yes. The blue wire is spliced into the wire that runs from the ecm to the connector under the steering wheel. (pin #1) The black wire is spliced to the wire that runs from this connector (pin#2) to ground. The white wire is spliced to the pink wire on the connector under the ignition switch.

01-27-2011, 11:41 AM	#17
Yarisonline I've made a post! Drives: 2007 Yaris CE Join Date: Jan 2011 Location: USA Posts: 1	Hey, I suggest trying to find that part at www.yarisparts.com ,that's where I get my parts at warehouse price. Good luck :)