Looking at seats... - Page 7 - Toyota Yaris Forums

MGargano · 08-08-2009, 09:25 PM

Quote:

Originally Posted by CTScott

You could try it as-is to see if we clear the code 32 and have the passenger air bag on light.

Roger that. How long should I leave the battery disconnected?

CTScott · 08-08-2009, 09:31 PM

Quote:

Originally Posted by MGargano

Roger that. How long should I leave the battery disconnected?

5 minutes should be enough.

MGargano · 08-08-2009, 09:36 PM

Quote:

Originally Posted by CTScott

5 minutes should be enough.

Should I jump the OBDII ports again? Or just turn the ignition to 'on' and check the indicators?

CTScott · 08-08-2009, 09:43 PM

Quote:

Originally Posted by MGargano

Should I jump the OBDII ports again? Or just turn the ignition to 'on' and check the indicators?

Power it up once to see, and then power off, jump and read the flashes. Now hopefully just codes 55 and 56 come up.

MGargano · 08-08-2009, 09:54 PM

No good. SRS, passenger airbag 'off', and passenger seat belt indicators still lit. The jump showed the same 32, 55, & 56 codes

CTScott · 08-08-2009, 10:02 PM

Quote:

Originally Posted by MGargano

No good. SRS, passenger airbag 'off', and passenger seat belt indicators still lit. The jump showed the same 32, 55, & 56 codes

OK. Do you have a multimeter to measure the voltage?

MGargano · 08-08-2009, 10:09 PM

Rock n' Roll

MGargano · 08-08-2009, 10:10 PM

Just tell me what I'm doing here... it's been forever since I've used this thing lol

CTScott · 08-08-2009, 10:13 PM

Probes are in the right hole. Switch it to VDC 20. Touch the black lead to pin 3 and the red to 1 and then 3.

MGargano · 08-08-2009, 10:16 PM

Quote:

Originally Posted by CTScott

Probes are in the right hole. Switch it to VDC 20. Touch the black lead to pin 3 and the red to 1 and then 3.

Roger. We're talking about one of the four weight sensors, right?

CTScott · 08-08-2009, 10:23 PM

Quote:

Originally Posted by MGargano

Roger. We're talking about one of the four weight sensors, right?

Correct

MGargano · 08-08-2009, 10:25 PM

Ok with the meter on VDC 20 I'm getting zero on everything. WTF?

CTScott · 08-08-2009, 10:26 PM

You have to have the ignition on.

MGargano · 08-08-2009, 10:26 PM

The ignition is on, for the record

MGargano · 08-08-2009, 10:31 PM

I just tried a different sensor, still nothing...

CTScott · 08-08-2009, 10:32 PM

Hmmm. Measure the voltage between the battery posts to make sure the meter is working.

MGargano · 08-08-2009, 10:36 PM

Quote:

Originally Posted by CTScott

Hmmm. Measure the voltage between the battery posts to make sure the meter is working.

That's working. Meter measure 12.55 or so volts

CTScott · 08-08-2009, 10:40 PM

OK. Check the ECU-B fuse under the hood.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible Group Buy.. Racing Seats, Intakes?	TinyGiant	Items for Sale by private party	60	09-11-2009 02:40 PM
FS: Recaro Pole Position Racing Seats (black) -- socal	03Z33	Items for Sale by private party	13	12-07-2008 05:08 PM
sparco seats and pedals (pics)	turboyaris	Cosmetic Modifications (Exterior/Interior)	18	09-05-2007 02:43 AM
Sport / Racing seats worth the while?	mikeukrainetz	Cosmetic Modifications (Exterior/Interior)	10	11-19-2006 01:17 PM
Yaris Liftback Seats	artyin	General Yaris / Vitz Discussion	3	04-30-2006 04:07 PM

08-08-2009, 09:54 PM	#113
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	No good. SRS, passenger airbag 'off', and passenger seat belt indicators still lit. The jump showed the same 32, 55, & 56 codes

08-08-2009, 10:09 PM	#115
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	Rock n' Roll

08-08-2009, 10:10 PM	#116
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	Just tell me what I'm doing here... it's been forever since I've used this thing lol

08-08-2009, 10:13 PM	#117
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Probes are in the right hole. Switch it to VDC 20. Touch the black lead to pin 3 and the red to 1 and then 3.

08-08-2009, 10:25 PM	#120
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	Ok with the meter on VDC 20 I'm getting zero on everything. WTF?

08-08-2009, 10:26 PM	#121
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	You have to have the ignition on.

08-08-2009, 10:26 PM	#122
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	The ignition is on, for the record

08-08-2009, 10:31 PM	#123
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	I just tried a different sensor, still nothing...

08-08-2009, 10:32 PM	#124
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Hmmm. Measure the voltage between the battery posts to make sure the meter is working.

08-08-2009, 10:40 PM	#126
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	OK. Check the ECU-B fuse under the hood.