FS: TRD Japan Engine Mounts -- NEW -- Socal - Toyota Yaris Forums

03Z33 · 11-20-2008, 08:36 PM

SOLD

For Sale: TRD Left side & Right side performance engine mount

Brand new, never installed
Will fit all 2007+ Toyota Yaris hatchback and sedan, manual and automatic.
These look identical to the stock engine mounts, only part number is different and using stiffer rubber to reduce unwanted engine movement.

I have no use for these any longer since I'm planning to swap engines.

I paid over $360 for these not including shipping from Japan

$200 obo (shipping will be ~ $15 within the continetal USA)

SOLD

Doc Zaius · 11-20-2008, 08:49 PM

Nice! This would certainly help Blitz'ed engines not move around so much.

Not that the missus would let me spend any more on the car, but how would one go about replacing the stock ones with these? Would you have to pull the engine? Or at least have a lift to hold it while swapping them? Thanks!

03Z33 · 11-20-2008, 09:11 PM

The shop manual recommends using an engine support/hoist from the top to support the weight of the engine.

I've done similar installs without the hoist, I usually place a floor jack under the engine/trans with a piece of wood to support the weight while replacing one mount at a time. You only need to jack the engine up a couple of inches to allow clearance to exchange the mounts.

dngz · 11-20-2008, 11:34 PM

pics?

03Z33 · 11-21-2008, 01:47 AM

Quote:

Originally Posted by dngz

pics?

They look identical to your stock mounts.

03Z33 · 11-21-2008, 01:51 AM

Looks like these are going on "Cali Yaris' " ride... I'm sure we'll get a review from him and hopefully if he likes them, he'll make more of these available to us if there's demand.

m911gt · 11-21-2008, 03:39 AM

sold or still available?

03Z33 · 11-21-2008, 10:03 AM

SOLD to Cali Yaris

mickd · 11-25-2008, 06:57 AM

did u have a part number for them??

03Z33 · 11-26-2008, 02:09 AM

Here's a link to the TRD Japan web-page for these parts:

http://www.trdparts.jp/english/parts_bush-vitz90.html

Part numbers:
■Vitz/NCP91

Engine mount RH 12305-NP900
Engine mount LH 12372-NP900
Engine mount RR 12363-NP900

11-20-2008, 08:36 PM	#1
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	FS: TRD Japan Engine Mounts -- NEW -- Socal SOLD For Sale: TRD Left side & Right side performance engine mount Brand new, never installed Will fit all 2007+ Toyota Yaris hatchback and sedan, manual and automatic. These look identical to the stock engine mounts, only part number is different and using stiffer rubber to reduce unwanted engine movement. I have no use for these any longer since I'm planning to swap engines. I paid over $360 for these not including shipping from Japan $200 obo (shipping will be ~ $15 within the continetal USA) SOLD Last edited by 03Z33; 11-21-2008 at 10:03 AM.

11-20-2008, 08:49 PM	#2
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Nice! This would certainly help Blitz'ed engines not move around so much. Not that the missus would let me spend any more on the car, but how would one go about replacing the stock ones with these? Would you have to pull the engine? Or at least have a lift to hold it while swapping them? Thanks! __________________ 2006 Red Blitzed RS 5-door

11-21-2008, 03:39 AM	#7
m911gt Carless in Chicago View User's Garage Drives: 08 Blk LB Join Date: Oct 2008 Location: Chicago Posts: 2,479	sold or still available? __________________ Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 05:34 AM
FS: TRD 18" Wheels + Tires = $700 SOCAL	kapo	Items for Sale by private party	18	11-23-2008 03:54 PM
TRD Parts	MC-BPT	Sponsors Classifieds Area	9	06-23-2007 10:51 AM
DIY: Urethane Engine mounts	turboyaris	DIY / Maintenance / Service	1	05-21-2007 01:08 PM
So we just came back from TRD Thailand...	eTiMaGo	Performance Modifications	28	03-21-2007 05:52 PM

11-20-2008, 09:11 PM	#3
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	The shop manual recommends using an engine support/hoist from the top to support the weight of the engine. I've done similar installs without the hoist, I usually place a floor jack under the engine/trans with a piece of wood to support the weight while replacing one mount at a time. You only need to jack the engine up a couple of inches to allow clearance to exchange the mounts.

11-20-2008, 11:34 PM	#4
dngz View User's Garage Drives: black yaris sedan Join Date: Jun 2006 Location: vancouver Posts: 475	pics?

11-21-2008, 01:51 AM	#6
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	Looks like these are going on "Cali Yaris' " ride... I'm sure we'll get a review from him and hopefully if he likes them, he'll make more of these available to us if there's demand.

11-21-2008, 10:03 AM	#8
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	SOLD to Cali Yaris

11-25-2008, 06:57 AM	#9
mickd Drives: Toyota's Join Date: Nov 2008 Location: Sydney NSW australia Posts: 3	did u have a part number for them??

11-26-2008, 02:09 AM	#10
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	Here's a link to the TRD Japan web-page for these parts: http://www.trdparts.jp/english/parts_bush-vitz90.html Part numbers: ■Vitz/NCP91 Engine mount RH 12305-NP900 Engine mount LH 12372-NP900 Engine mount RR 12363-NP900