Bored $5 and.. just wanted to pissed off my neighbors

[YarisPR]

I actually did it a long time ago but I just decided to post it now.
Rice? Yes
Loud? Yes
Do I care? No
Do I drive like his everyday? Nop

Some short clips





The Tools


The thing




If you are bored try it. It doesn't take more then 5 min. Its road block proved hahaha I just get of the road, take out the tool let it go and put back the originals.

[Motorhead6T5]

I use to do that with my first 5.0 mustang,was fun but i lost a huge amount of low end. Just unbolt it at the header lol.

[slvryaris]

I am waiting for some one to do a side pipe that comes out in front of the back passenger side wheel.

[thatboyjer]

....what did you do? the video sounds fun though. looks like fun :D

[redduck]

Originally Posted by slvryaris

I am waiting for some one to do a side pipe that comes out in front of the back passenger side wheel.

working on it

[drecian]

So did you take the (rest of the) exhaust off, or just loosen the join for more flow? Notice any more top end power? I might try this next time I'm out at the track and see if it makes any difference since it's more top-end/ledd bottom-end at my local track...

[YarisPR]

I actually fill the car has more top end. But That may be the sound effect hahaha. Maybe is because I run he car like that and without air filter and without the plastic tube that goes into the airbox (whatever it's call). This may sound stupid but I think my car is one of those Yaris that actually bring the 106HP instead of the estimated

Anyways its fun to hear and it was only $5

[thatboyjer]

i took a look see at the exhaust and saw the part in the pictures. so you loosened those two screws?? what if a rock were to jump in it???

lol anyways looks fun but i'd probably only ever do that at the track.

[churp]

Make sure there's a heat shield in place.....I started my carpet on fire many years ago when I had a hole in the exhaust.

[YarisPR]

^^^^ is right check your plates first since I already lost the one that protect the gas tank. I'am actually waiting for the dealership to call me and give me the replacement... sureeee that was like 5 month ago I have not even ask anymore for the plate since it actually i manage to tigh it down with some home made stuff hahahaha

[Nexus1155]

damn dude how did you get up there... i went to do that and i look up and its through like the whole like suspension bar and whatnot its up there...

[YarisPR]

Originally Posted by Nexus1155

damn dude how did you get up there... i went to do that and i look up and its through like the whole like suspension bar and whatnot its up there...

Its easy at least on the sedan. Just lay down infront of the rear passanger side tire and u'll be able to see the 2 bolts that conect to the muffler. Just unbolt them, get a bolt that fits. Insert the spring between the muffler(goes o the back) and the other side of the exhaust (comes from th front).

And wallahhh u got another laud honda ups.. sorry Yaris hahaha

[Nexus1155]

hahahah damn I was all looking up into where the manifold and downpipe comes from ... guess i looked too far...thanks alot!!

[Nexus1155]

Also, whereabout would you find a spring like that... and is that a valve spring? hahah

[YarisPR]

Originally Posted by Nexus1155

Also, whereabout would you find a spring like that... and is that a valve spring? hahah

Actually is for exhaust, its like the one the exhaust brings but a bit shorter. I did buy it just in case I really didn't wanted to lose the stock one.