Scangauge connection with my yaris ECU - Toyota Yaris Forums

yaris alg · 12-08-2011, 03:34 AM

I 've just bought a SGII, but still no connected to my NCP92L-BEMRK yaris sedan 2006

, after investigation my ECU (ref :89661‑52C40) is not the same as the models sold in Europe and US.
http://www.toyodiy.com/parts/p_G_200...BEMRK_8404.htm .
It's for leaded gasoline specs, and I think ?? it's a JOBDII protocol. so
The question is: can I with a wiring mod make the SGII work? if not swap the ECU to the ECU 89661‑52B50 compatible with my car model?
I haven't seen the Algerian toyota dealer yet.
Thanks

yaris alg · 12-08-2011, 03:46 AM

sorry the reference is http://www.toyodiy.com/parts/p_G_200...EMRK_8404.html

A-Dingo-Ate-My-Baby · 12-08-2011, 08:47 AM

cannot be done with scangauge. you might be able to rewire the port but I haven't investigated that

scangauge only certified to work on US spec and Canada spec OBD II compliant vehicles

JOBD

JOBD is a version of OBD-II for vehicles sold in Japan.

yaris alg · 12-10-2011, 05:26 AM

Is there an issue to reflash the ECU? to become OBDII compliant?

A-Dingo-Ate-My-Baby · 12-10-2011, 09:29 AM

contact Linear Logic and ask

12-08-2011, 03:34 AM	#1
yaris alg Drives: Yaris SEDAN 1.3 Join Date: Nov 2011 Location: Algeria Posts: 4	Scangauge connection with my yaris ECU I 've just bought a SGII, but still no connected to my NCP92L-BEMRK yaris sedan 2006, after investigation my ECU (ref :89661‑52C40) is not the same as the models sold in Europe and US. http://www.toyodiy.com/parts/p_G_200...BEMRK_8404.htm . It's for leaded gasoline specs, and I think ?? it's a JOBDII protocol. so The question is: can I with a wiring mod make the SGII work? if not swap the ECU to the ECU 89661‑52B50 compatible with my car model? I haven't seen the Algerian toyota dealer yet. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaris Motor Swap Thread Read before posting swap threads	Sabretooth	Performance Modifications	218	02-19-2024 09:04 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Persuade me to buy a Yaris!	TONIZZLE	General Yaris / Vitz Discussion	48	09-09-2011 11:31 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

12-08-2011, 03:46 AM	#2
yaris alg Drives: Yaris SEDAN 1.3 Join Date: Nov 2011 Location: Algeria Posts: 4	sorry the reference is http://www.toyodiy.com/parts/p_G_200...EMRK_8404.html

12-08-2011, 08:47 AM	#3
A-Dingo-Ate-My-Baby Banned Drives: yaris Join Date: Jan 2011 Location: earth Posts: 364	cannot be done with scangauge. you might be able to rewire the port but I haven't investigated that scangauge only certified to work on US spec and Canada spec OBD II compliant vehicles JOBD JOBD is a version of OBD-II for vehicles sold in Japan.

12-10-2011, 05:26 AM	#4
yaris alg Drives: Yaris SEDAN 1.3 Join Date: Nov 2011 Location: Algeria Posts: 4	Is there an issue to reflash the ECU? to become OBDII compliant?

12-10-2011, 09:29 AM	#5
A-Dingo-Ate-My-Baby Banned Drives: yaris Join Date: Jan 2011 Location: earth Posts: 364	contact Linear Logic and ask