prius piston fit yaris (what is part number)? - Toyota Yaris Forums

sang pengembara · 03-31-2016, 03:12 AM

Please help, I need part number of prius piston and ring sets fit yaris 2008. Found from other thread was:

Rings:
1NZ-FE: 13011-21041
1NZ-FXE: 13011-21100

Pistons:
1NZ-FE: 13101-21070
1NZ-FXE: 13101-21110

thank you

Dragonslayer182 · 04-03-2016, 08:32 PM

They most likely will not work. The Yaris engine has a different compression ratio than the Prius.

CTScott · 04-03-2016, 08:40 PM

Those part numbers are correct and they will fit. They will result in a higher compression ratio, but I assume that is why you are looking for them.

brushforhire · 04-03-2016, 08:44 PM

Prius piston Swap

Those part numbers should be good. Those are the part numbers from a 2008 prius.

LTHatch · 04-03-2016, 11:53 PM

Does the prius pistons swap include the prius rings as well? They yaris and prius rings face different stresses, curious if the yaris rings might be a better option with the prius pistons.

sang pengembara · 04-04-2016, 04:19 AM

I place an order and waiting for the material to be shifted from state.. 4 pcs of prius piston including the rings.. I will update with pictures when the work is in progress.. ��.. it will be direct bolt on to the stock of 1nzfe..

Sent from my C6903 using Tapatalk

xnamerxx · 04-04-2016, 10:27 AM

Prius rings are thinner than Yaris rings, they also have less tension. Everything should work, but you need extremely high octane fuel to compensate for the extra compression. You also won't be able to modify the cams as there is less clearance for lift and duration.

sang pengembara · 04-05-2016, 05:05 AM

Quote:

Originally Posted by xnamerxx

Prius rings are thinner than Yaris rings, they also have less tension. Everything should work, but you need extremely high octane fuel to compensate for the extra compression. You also won't be able to modify the cams as there is less clearance for lift and duration.

Here in Kingdom we have 92 and 95 octane available, I hope it will run the engine properly..

Sent from my C6903 using Tapatalk

xnamerxx · 04-05-2016, 05:51 PM

You'll probably have to run 95, I wouldn't think 92 would cut it.

sang pengembara · 05-24-2016, 03:33 PM

The Pistons just arrive... 😀 feeling happy...

Sent from my C6903 using Tapatalk

sang pengembara · 05-24-2016, 03:41 PM

I hope there is some slots to install this Pistons ASAP...

Sent from my C6903 using Tapatalk

rabbito · 06-11-2016, 01:51 AM

Quote:

Originally Posted by sang pengembara

I hope there is some slots to install this Pistons ASAP...

Sent from my C6903 using Tapatalk

please update for us...did you install them yet? i heard you also need new set of piston rings...updateeeeeeeee 😬😬😬😬😬😬

Sent from my SM-J700F using Tapatalk

Fluxtasy · 06-11-2016, 02:36 AM

show us dyno results xD

eneos_86 · 06-11-2016, 08:14 AM

Hi... I from malaysia... that piston can handle standard connecting rod... I very interested about that modified

TRD SPEC · 07-25-2016, 02:27 AM

Can't wait to see the dyno and more info about it.

Sent from my 3006 using Tapatalk

rabbito · 07-25-2016, 02:31 AM

Quote:

Originally Posted by TRD SPEC

Can't wait to see the dyno and more info about it.

Sent from my 3006 using Tapatalk

change of plan.. bolt on racing cam...about the same price...rather go cams than piston

Sent from my SM-J700F using Tapatalk

TRD SPEC · 07-25-2016, 02:33 AM

Quote:

Originally Posted by rabbito

change of plan.. bolt on racing cam...about the same price...rather go cams than piston

Sent from my SM-J700F using Tapatalk

Wut...... awwwww
but still with higher lift cam doesn't that make it more power to the mid and high range and less on the low?if you doesn't upgrade the compression i don't think the car would accelerate well unless you hit top speed alot...

Sent from my 3006 using Tapatalk

rabbito · 07-25-2016, 02:39 AM

i was trying to buy the prius pistons from the dealer and pay for the labor but most of shops were annoyed by it. they were trying to sell forged racing pistons that had similar cut out as prius pistons..😡😡😡😡😡

so i decided to go for the cams...hassle free...pay and install kind of thing...😃😃😃😃

but im still keeping this project..

Sent from my SM-J700F using Tapatalk

03-31-2016, 03:12 AM	#1
sang pengembara Drives: Y-sedan'07-1nzfe engine swap Join Date: Dec 2014 Location: jeddah - saudia arabia Posts: 13	prius piston fit yaris (what is part number)? Please help, I need part number of prius piston and ring sets fit yaris 2008. Found from other thread was: Rings: 1NZ-FE: 13011-21041 1NZ-FXE: 13011-21100 Pistons: 1NZ-FE: 13101-21070 1NZ-FXE: 13101-21110 thank you

04-03-2016, 08:40 PM	#3
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Those part numbers are correct and they will fit. They will result in a higher compression ratio, but I assume that is why you are looking for them. __________________

04-04-2016, 04:19 AM	#6
sang pengembara Drives: Y-sedan'07-1nzfe engine swap Join Date: Dec 2014 Location: jeddah - saudia arabia Posts: 13	I place an order and waiting for the material to be shifted from state.. 4 pcs of prius piston including the rings.. I will update with pictures when the work is in progress.. ��.. it will be direct bolt on to the stock of 1nzfe.. Sent from my C6903 using Tapatalk Last edited by sang pengembara; 04-04-2016 at 07:13 AM.

04-04-2016, 10:27 AM	#7
xnamerxx 0-60 in slow Drives: light blue liftback Join Date: Aug 2009 Location: so cal Posts: 926	Prius rings are thinner than Yaris rings, they also have less tension. Everything should work, but you need extremely high octane fuel to compensate for the extra compression. You also won't be able to modify the cams as there is less clearance for lift and duration. __________________ 2014 BSpec Divisional Champion

04-05-2016, 05:51 PM	#9
xnamerxx 0-60 in slow Drives: light blue liftback Join Date: Aug 2009 Location: so cal Posts: 926	You'll probably have to run 95, I wouldn't think 92 would cut it. __________________ 2014 BSpec Divisional Champion

04-03-2016, 08:32 PM	#2
Dragonslayer182 Teal Squealer View User's Garage Drives: 07 Yaris Sedan Join Date: Jul 2015 Location: West Tennessee Posts: 42	They most likely will not work. The Yaris engine has a different compression ratio than the Prius.

04-03-2016, 08:44 PM	#4
brushforhire Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007 Location: Johnstown, PA Posts: 320	Prius piston Swap Those part numbers should be good. Those are the part numbers from a 2008 prius.

04-03-2016, 11:53 PM	#5
LTHatch Drives: 2013 Yaris Hatchback L Join Date: May 2013 Location: Newark NJ Posts: 229	Does the prius pistons swap include the prius rings as well? They yaris and prius rings face different stresses, curious if the yaris rings might be a better option with the prius pistons.

05-24-2016, 03:33 PM	#10
sang pengembara Drives: Y-sedan'07-1nzfe engine swap Join Date: Dec 2014 Location: jeddah - saudia arabia Posts: 13	The Pistons just arrive... 😀 feeling happy... Sent from my C6903 using Tapatalk

05-24-2016, 03:41 PM	#11
sang pengembara Drives: Y-sedan'07-1nzfe engine swap Join Date: Dec 2014 Location: jeddah - saudia arabia Posts: 13	I hope there is some slots to install this Pistons ASAP... Sent from my C6903 using Tapatalk

06-11-2016, 02:36 AM	#13
Fluxtasy feed my pet View User's Garage Drives: Yaris Sedan '10 Join Date: Aug 2014 Location: Malaysia Posts: 128	show us dyno results xD

06-11-2016, 08:14 AM	#14
eneos_86 I've made a post! Drives: vios Join Date: Jun 2016 Location: Malaysia Posts: 1	Hi... I from malaysia... that piston can handle standard connecting rod... I very interested about that modified

07-25-2016, 02:27 AM	#15
TRD SPEC Drives: Ncp42 Join Date: Jan 2016 Location: Malaysia Posts: 13	Can't wait to see the dyno and more info about it. Sent from my 3006 using Tapatalk

07-25-2016, 02:39 AM	#18
rabbito View User's Garage Drives: 2012 Toyota Yaris Sedan (Vios) Join Date: Dec 2015 Location: Thailand Posts: 291	i was trying to buy the prius pistons from the dealer and pay for the labor but most of shops were annoyed by it. they were trying to sell forged racing pistons that had similar cut out as prius pistons..😡😡😡😡😡 so i decided to go for the cams...hassle free...pay and install kind of thing...😃😃😃😃 but im still keeping this project.. Sent from my SM-J700F using Tapatalk __________________ Brain: ATD E85 Timing Advance ECU Engine: 1JZ Injectors, Header, Center Pipe, K&N Drop In, E85 Injector Converter Suspension: Hankook Tires, Performance OEM replacement Shocks & Springs F: 1.5 B: 1.4, Mu Spec brake pads, Front tower & Rear sway bars, Rays nut & lock Electric: Volt Stablizer & Multi gauge obd2 Cosmetic: Toyota red emblem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Power-to-Weight Ratios of Yaris, Fit, Mini, etc.	Idjiit	Off-topic / Other Cars / Everything else Discussions	6	10-06-2017 05:10 PM
test drove a fit...mirage...and a yaris	428CobraJet	Third Gen Yaris General Discussion	15	05-17-2015 02:08 PM
On tire pressures, the Yaris, and the Prius	sbergman27	Fuel Economy Forum	18	04-05-2010 05:35 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM