build cost question??? - Toyota Yaris Forums

chancellor6869 · 09-26-2014, 12:31 PM

ok so here i am looking for information on some people builds with estimated price totals......including everything.

im looking for engine build, forced induction setup, tuning fuel, etc.....

just currious on what people have spent and what the results were. thanks guys.

mitchell12 · 09-26-2014, 08:14 PM

DIY or at a shop?

Jlively · 09-26-2014, 10:04 PM

all depends on how far you want to go really.
Im looking at 5500-6500 in parts alone to the motor and thats without port and polish on the head, and all the labor done by me. thats including forced injection, cams etc.
but that also includes me buying and making a custom intake manifold and maybe a few other pieces others wouldnt like arp head bolts and upgraded exhaust manifold bolts. with labor you can factor that prolly closer to 7500-8000$ usd.

Im trying to achieve 180+ hp, really wanting to hit 220+ but that might require a lil more work idk well see lol.

Ryze268 · 09-27-2014, 11:35 AM

I was told our motors don't see real gains from a port & polish as they already flow well from factory

Jlively · 09-27-2014, 11:59 AM

I havent looked to far into it myself, its just an idea in the list of to do shit lol.
I have heard that one or two times before tho, I was planning to look into it more.

chancellor6869 · 09-27-2014, 03:29 PM

Quote:

Originally Posted by mitchell12

DIY or at a shop?

well right now i just ordered a used motor with 32000 miles on it to throw in the car and use the old motor to build myself.....so of course ill take it to the machine shop cause i cant do that obliviousl....

kou · 09-27-2014, 03:38 PM

Quote:

Originally Posted by Ryze268

I was told our motors don't see real gains from a port & polish as they already flow well from factory

This is true. Minimal gains on port and polish, more gains with a different cam and higher rpms.

Jlively · 09-27-2014, 08:08 PM

Quote:

Originally Posted by kou

This is true. Minimal gains on port and polish, more gains with a different cam and higher rpms.

Cams I am definitely considering Jun cams, its a bit to cough up for a set for a
on a 1.5 ha ha buuut I feel in the end Ill need them anyways
I wont waste my time with the port and polish tho ty :)

kou · 09-27-2014, 08:43 PM

For the amount of power you want you don't need cams. Boost is all you need.

Jlively · 09-27-2014, 09:15 PM

If I dont achieve the the hp I want thats fine to. Just a good bit more power and throttle and I can be happy. Im still not to sure what all I will do in the end I am just planning for a just in case with most things. If I have a higher $ plan in mind and I spend less I feel better about it even if it is only 500$ lol. Im still not sold on the forced induction. I am a lil tempted to try a all motor build and see what I can crank out.
still talking to some people who have built both and getting some ideas and seeing which I will be pleased with more in the end

09-26-2014, 12:31 PM	#1
chancellor6869 Drives: yaris hatch is the sh*t Join Date: Jan 2013 Location: fortworth texas Posts: 74	build cost question??? ok so here i am looking for information on some people builds with estimated price totals......including everything. im looking for engine build, forced induction setup, tuning fuel, etc..... just currious on what people have spent and what the results were. thanks guys.

09-26-2014, 08:14 PM	#2
mitchell12 Drives: 2007 yaris HB Join Date: May 2013 Location: St.John's, Newfoundland, Canada Posts: 55	DIY or at a shop? __________________

09-27-2014, 11:35 AM	#4
Ryze268 Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013 Location: Antigua & Barbuda Posts: 287	I was told our motors don't see real gains from a port & polish as they already flow well from factory __________________ 2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Worldwide - Cost to register your Yaris	MAD DOG	Off-topic / Other Cars / Everything else Discussions	12	10-26-2008 01:50 AM

09-26-2014, 10:04 PM	#3
Jlively Mr J. Drives: 2009 yaris 5 dr HB Join Date: Sep 2014 Location: Omaha, Nebraska USA Posts: 37	all depends on how far you want to go really. Im looking at 5500-6500 in parts alone to the motor and thats without port and polish on the head, and all the labor done by me. thats including forced injection, cams etc. but that also includes me buying and making a custom intake manifold and maybe a few other pieces others wouldnt like arp head bolts and upgraded exhaust manifold bolts. with labor you can factor that prolly closer to 7500-8000$ usd. Im trying to achieve 180+ hp, really wanting to hit 220+ but that might require a lil more work idk well see lol.

09-27-2014, 11:59 AM	#5
Jlively Mr J. Drives: 2009 yaris 5 dr HB Join Date: Sep 2014 Location: Omaha, Nebraska USA Posts: 37	I havent looked to far into it myself, its just an idea in the list of to do shit lol. I have heard that one or two times before tho, I was planning to look into it more.

09-27-2014, 08:43 PM	#9
kou View User's Garage Drives: 08 lb Join Date: Aug 2007 Location: nj Posts: 935	For the amount of power you want you don't need cams. Boost is all you need.

09-27-2014, 09:15 PM	#10
Jlively Mr J. Drives: 2009 yaris 5 dr HB Join Date: Sep 2014 Location: Omaha, Nebraska USA Posts: 37	If I dont achieve the the hp I want thats fine to. Just a good bit more power and throttle and I can be happy. Im still not to sure what all I will do in the end I am just planning for a just in case with most things. If I have a higher $ plan in mind and I spend less I feel better about it even if it is only 500$ lol. Im still not sold on the forced induction. I am a lil tempted to try a all motor build and see what I can crank out. still talking to some people who have built both and getting some ideas and seeing which I will be pleased with more in the end