Nitto midpipe - Toyota Yaris Forums

carlo0616 · 01-02-2012, 08:48 PM

Hi was going to get a custom mid section made up but found the nitto one on microimage. I'm wondering if it will fit the 1.8?
Obviously the bends and hangers will fit the same also Im sure the rear flange is the same, I think I will have to modify the header flange?
Also how many sensors are in our exhaust and will they wit in this

Thanks

Klink10 · 01-03-2012, 10:40 AM

Don't know about fitment. Just 1 sensor in the Nitto which will need a anti-fouler to keep from getting a code. Other sensor is in the header.

CrankyOldMan · 01-03-2012, 11:46 AM

I'm curious about this too. I've been looking at the feasibility of a N.American hatch to T-sport conversion (1.8L, 6-speed) and ended up with the same general question. The T-sport mid-pipe is exclusive to the T-sport (from toyodiy.com) but I can't say if it's due to emissions or fitment.

cali yaris · 01-03-2012, 01:18 PM

This will depend on the header being positioned in the same position and angle as the 1.5L header. I'm not sure, but I could look at an xD header next to a Yaris header and check that out.

bzinn 1 · 01-07-2012, 01:17 PM

I looked at a xD header and midpipe and it looks close but not a perfect match up.....but that is also from under a car and not a side by side angle matchup......think we will need Garm to do a side by side.

01-02-2012, 08:48 PM	#1
carlo0616 Drives: Yaris T-Sport Join Date: Jan 2009 Location: Swansea Posts: 21	Nitto midpipe Hi was going to get a custom mid section made up but found the nitto one on microimage. I'm wondering if it will fit the 1.8? Obviously the bends and hangers will fit the same also Im sure the rear flange is the same, I think I will have to modify the header flange? Also how many sensors are in our exhaust and will they wit in this Thanks

01-03-2012, 01:18 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	This will depend on the header being positioned in the same position and angle as the 1.5L header. I'm not sure, but I could look at an xD header next to a Yaris header and check that out. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Nitto Midpipe	kustom play	Items for Sale by private party	15	02-11-2011 08:36 PM
Header that fits the nitto midpipe	regal	Performance Modifications	4	05-15-2009 09:36 AM
Nitto Midpipe w/ no muffler	SweetRS	Performance Modifications	12	05-12-2009 12:57 AM
Q about nitto midpipe?	jaserhunter	Performance Modifications	28	04-22-2009 02:28 PM
dc header and nitto midpipe..	mastaofdisasta	Performance Modifications	3	04-17-2009 09:12 AM

01-03-2012, 10:40 AM	#2
Klink10 View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2007 Location: 910 Posts: 1,229	Don't know about fitment. Just 1 sensor in the Nitto which will need a anti-fouler to keep from getting a code. Other sensor is in the header.

01-03-2012, 11:46 AM	#3
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	I'm curious about this too. I've been looking at the feasibility of a N.American hatch to T-sport conversion (1.8L, 6-speed) and ended up with the same general question. The T-sport mid-pipe is exclusive to the T-sport (from toyodiy.com) but I can't say if it's due to emissions or fitment.

01-07-2012, 01:17 PM	#5
bzinn 1 Drives: 2008 Yaris HB Join Date: Oct 2008 Location: University Place,WA Posts: 828	I looked at a xD header and midpipe and it looks close but not a perfect match up.....but that is also from under a car and not a side by side angle matchup......think we will need Garm to do a side by side.