Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 12-13-2006, 10:31 PM   #1
bigsky2
Cousin Vitz
 
bigsky2's Avatar
 
Drives: Yaris RS 5DR / Vitz RS wannabe
Join Date: Mar 2006
Location: Vancouver, Canada
Posts: 1,082
Help: Water/Moisture Entered Fog Light Assembly

I noticed one of my fog lights was out this evening and when I looked at the fog light, I noticed moisture inside the lens assembly.

Is the fog light assembly toast now, or is it isolated to just the bulb?

And how would I go about repairing the immediate problem?

I was thinking of using a hair dryer or heat gun to dry out the moisture inside the assembly before connecting a new bulb.

Help please
__________________
2007 Yaris RS Hatchback Black Sand Pearl 5DR MT
DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930
bigsky2 is offline   Reply With Quote
Old 12-13-2006, 10:42 PM   #2
acrbill
 
Drives: Polar White Hatch
Join Date: Nov 2006
Location: chicago
Posts: 407
go right to the dealer and get it covered under warranty.
__________________
http://home.comcast.net/~job0b/ywsig.gif
ChinoCharles Intake supporter.
acrbill is offline   Reply With Quote
Old 12-14-2006, 12:53 AM   #3
bigsky2
Cousin Vitz
 
bigsky2's Avatar
 
Drives: Yaris RS 5DR / Vitz RS wannabe
Join Date: Mar 2006
Location: Vancouver, Canada
Posts: 1,082
Well I got a little antsy and decided to check it out myself.

Seems like some water got into the housing via the hose/shield around the fog light wire harness and its shorted the bulb.

Connected a spare H11 bulb after drying the assembly and the wiring harness and it worked fine.

I'm a little surprised that the fog lights are not covered by a rubber boot to prevent water from entering.

I'll see if I can make a boot for the fog light to prevent this from happening again!
__________________
2007 Yaris RS Hatchback Black Sand Pearl 5DR MT
DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930
bigsky2 is offline   Reply With Quote
Old 12-14-2006, 02:25 AM   #4
eTiMaGo
vroom vroom
 
eTiMaGo's Avatar
 
Drives: lil red 5-door
Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
Send a message via AIM to eTiMaGo Send a message via MSN to eTiMaGo Send a message via Yahoo to eTiMaGo
Quote:
Originally Posted by bigsky2 View Post

I'll see if I can make a boot for the fog light to prevent this from happening again!
Ah, no problem, you're Canadian, you guys are experts when it comes to a boot......







*runs away*
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish.
- Robert Jackson


Bye bye 1NZ...
eTiMaGo is offline   Reply With Quote
Old 12-14-2006, 07:30 AM   #5
vodkalush
I drive a yarrrris
 
vodkalush's Avatar
 
Drives: 07 Sedan Polar White
Join Date: Sep 2006
Location: Rochester, NY
Posts: 1,009
Send a message via AIM to vodkalush
__________________

Docotrs say all the drikning has mesesd up my seplilng and radieng


will work for parts
vodkalush is offline   Reply With Quote
Old 12-14-2006, 07:37 PM   #6
bigsky2
Cousin Vitz
 
bigsky2's Avatar
 
Drives: Yaris RS 5DR / Vitz RS wannabe
Join Date: Mar 2006
Location: Vancouver, Canada
Posts: 1,082
I think I know how water and moisture entered the fog light assembly.

It was snowing for a few days in Vancouver last month and when most if it melted away, my car was filthy.

I took it to an automated car wash and before the main wash began, there was an undercar wash/spray which probably shot some water into the fog light assembly.

Maybe it's time for that C-ONE aluminum under panel
__________________
2007 Yaris RS Hatchback Black Sand Pearl 5DR MT
DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930
bigsky2 is offline   Reply With Quote
Old 12-14-2006, 09:26 PM   #7
KSIbucky
 
KSIbucky's Avatar
 
Drives: 2007 Yaris manual dark silver
Join Date: May 2006
Location: Fond du Lac, WI
Posts: 694
Send a message via AIM to KSIbucky Send a message via MSN to KSIbucky
theres stuff you can buy to get rid of that at walmart it cheap
__________________
7 Color Tach
Fujita Intake
Momo pedals Shift knob and boot. Full TRD SSK.
Blitz exhaust
Megan Lowering Springs
(Next is DC Header)
KSIbucky is offline   Reply With Quote
Old 12-14-2006, 10:19 PM   #8
vodkalush
I drive a yarrrris
 
vodkalush's Avatar
 
Drives: 07 Sedan Polar White
Join Date: Sep 2006
Location: Rochester, NY
Posts: 1,009
Send a message via AIM to vodkalush
Like posted above; bring back to dealer and have them pay for a solution... I mean thats why you buy new; for the warrenty
__________________

Docotrs say all the drikning has mesesd up my seplilng and radieng


will work for parts
vodkalush is offline   Reply With Quote
Old 12-18-2006, 03:19 PM   #9
bigsky2
Cousin Vitz
 
bigsky2's Avatar
 
Drives: Yaris RS 5DR / Vitz RS wannabe
Join Date: Mar 2006
Location: Vancouver, Canada
Posts: 1,082
I fixed the problem myself and didn't have to bring it back to the dealer.

Just have to find some material to make a boot for the fog lamp as it's completely exposed to the elements...

How boot you help me out there etimago?
__________________
2007 Yaris RS Hatchback Black Sand Pearl 5DR MT
DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930
bigsky2 is offline   Reply With Quote
Old 12-18-2006, 03:35 PM   #10
Violin
 
Violin's Avatar
 
Drives: 2007 Yaris LB Auto
Join Date: Jul 2006
Location: New Jersey
Posts: 1,592
You might try putting one of those silicone dessicant packs in each lamp if there's room and sealing around the wires with silicone.
Violin is offline   Reply With Quote
Old 12-19-2006, 12:10 AM   #11
eTiMaGo
vroom vroom
 
eTiMaGo's Avatar
 
Drives: lil red 5-door
Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
Send a message via AIM to eTiMaGo Send a message via MSN to eTiMaGo Send a message via Yahoo to eTiMaGo
Quote:
Originally Posted by Violin View Post
You might try putting one of those silicone dessicant packs in each lamp if there's room and sealing around the wires with silicone.
Yeah I agree, good old RTV silicone sounds like your best friend here.

tip: If you don't want to have it looking all blobby when you're done, coat your fingers with a very strong soap-water mixture and smooth the silicone by hand.
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish.
- Robert Jackson


Bye bye 1NZ...
eTiMaGo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fog light install 07yaris_fe Cosmetic Modifications (Exterior/Interior) 10 07-20-2010 01:18 PM
question on Fog light clfile Cosmetic Modifications (Exterior/Interior) 6 11-09-2006 07:11 PM
rear fog light and tuned rear lights lefti696 Cosmetic Modifications (Exterior/Interior) 0 11-09-2006 03:06 PM
Fog Light OxyG3nE Cosmetic Modifications (Exterior/Interior) 1 11-01-2006 03:44 PM
Fog light on RS GabL DIY / Maintenance / Service 5 03-13-2006 05:31 PM


All times are GMT -4. The time now is 11:08 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.