Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Yaris TS Talk
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 09-18-2019, 06:20 AM   #1
Yar18TS
I've made a post!
 
Drives: Yaris 1.8 TS
Join Date: Sep 2019
Location: Cape Town
Posts: 1
Yaris 1.8 TS EC67 Transmission.

Hey Yarisworld.

This would be my first post.

I have a turbo charged Yaris 1.8 TS.

Would like to ask help on some info of the transmission(EC67)

1) Looking for LSD(I have no luck finding one)

2) (based on point 1)What other tranny I can possibly look at?

Any help would be greatly appreciated.

Regards
Yar18TS is offline   Reply With Quote
Old 09-18-2019, 10:20 PM   #2
06YarisRS
 
Drives: 2006 Yaris RS
Join Date: Aug 2017
Location: Beaver Harbour, New Brunswick, Canada
Posts: 1,675
Welcome to YW! Must hear more about this car!!! Sorry I can't help with transmission or LSD stuff. I have an auto, but musing about going manual myself. Search "Armstrong Racing". He built a 6-speed with a 5-speed case with an LSD. Crankyoldman bought that car and maybe he could help you out a bit too.
__________________


2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.youtube.com/watch?v=5Edvs_TSGkY
2008 Yaris LE H&R 10mm spacers (rear), RS rear spoiler
06YarisRS is offline   Reply With Quote
Old 09-21-2019, 10:00 PM   #3
stidnam
 
Drives: Starlet
Join Date: Nov 2017
Location: Australia
Posts: 58
Ah nice! The 6 speed version is a pretty rare car.

Just out of interest, do you know what the ratios are in the EC67?

Regarding an LSD - check out the quaife unit. https://shop.quaife.co.uk/toyota-ec6...d-differential

I've purchased one to install in my EC60 - I picked it up from Kam racing in the UK. I believe the EC60 and 67 should be fairly similar, but it'd be worth investigating further to validate. Also keep in mind that this isn't a true LSD, but rather an auto torque biasing diff. Therefore, if one front wheel were to fully loose traction, the diff would still operate like an open centre. What are chances of that though in a FWD car....guess it depends on what you plan doing with it.

Tell me more about this turbo setup :) Which turbo? What manifold did you use? What computer are you running?

Cheers
stidnam is offline   Reply With Quote
Old 09-21-2019, 10:08 PM   #4
stidnam
 
Drives: Starlet
Join Date: Nov 2017
Location: Australia
Posts: 58
I believe CUSCO may also make a unit, but I haven't investigated to confirm fitment.

https://www.cusco.co.jp/search/en/in...=&category=lsd

Given it's made for the ZRE186 in the Japanese market, I'm assuming that it's made to fit an EC6X box.

I'd be investigating both the quaife and cusco options before exploring any actual gearbox swap. Swapping gearboxes will mean you'll need to swap shifter cables as well.
stidnam is offline   Reply With Quote
Old 09-23-2019, 11:28 AM   #5
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,027
You'd have to open it up and measure the diff or get a breaker to pull one for you. Quaife does a good job of publishing the relevant dimensions on their products and would be a decent starting point. Then you could cross reference other brands that sell a model for the same applications.

Looks like someone else was asking a similar question but didn't get any replies (maybe it's you?) : https://www.toyotanation.com/threads...ssion.1664509/

I've looked into the EC6X swap into the US models. There's so much more than just cables involved: all the hydraulics, the drive shafts, the speedometer sensor, the mounts, etc. It's possible that I can do some research on this eventually (the EC67 is in some variants of the Corolla now) but it's cost prohibitive to buy one just for dissection. You might have better luck going the other way if the 1.5 MT is commonly available. The C6X gearboxes will NOT fit into our chassis without notching the front frame rail. ArmstrongRacing did a post about installing the C60 into the 2ZR Vios.
CrankyOldMan is offline   Reply With Quote
Old 09-23-2019, 12:03 PM   #6
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,027
Here's a list of other cars with the same diff: http://www.toyodiy.com/parts/xref?v=...on&mJ=on&mG=on

I'm not sure what market SA gets lumped in with so I checked all of the distribution zones.
CrankyOldMan is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Yaris Automatic Transmission squeal from second to third gear. sackville ns General Yaris / Vitz Discussion 3 03-11-2019 10:04 PM
Yaris TS 2ZR-FE Transmission Fluid Jackal84 DIY / Maintenance / Service 3 06-06-2015 06:08 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 5 09-05-2010 08:53 PM
2007 Yaris Pricing Info ! YarisBueller New YARIS Purchase Forum 104 06-24-2009 04:54 PM


All times are GMT -4. The time now is 11:39 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.