TIMING TOOL FOR YARIS - Toyota Yaris Forums

MCALLEN10749 · 02-21-2010, 08:02 AM

MY YARIS IS OFF CYCLINDER 1&2 AFTER NEW VALVES INSTALLED,DO I NEED A SPECIAL TOOL FOR TIMING CHAIN. CAN THE CHAIN STRETCH

DerFlosser · 02-21-2010, 08:36 AM

I haven't been inside this motor but did you mark the position of the chain and sprocket(S) when you the cams. I am assuming that there are timing marks on bearing caps to the front and the cam base. Obviously, everything should line up at TDC so then it comes down to possibly having slack in the chain if not marked prior to removal.

02-21-2010, 08:02 AM	#1
MCALLEN10749 I've made a post! Drives: toyota yaris 2005 Join Date: Feb 2010 Location: uk Posts: 1	TIMING TOOL FOR YARIS MY YARIS IS OFF CYCLINDER 1&2 AFTER NEW VALVES INSTALLED,DO I NEED A SPECIAL TOOL FOR TIMING CHAIN. CAN THE CHAIN STRETCH

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
yaris timing belt	phenoyz	General Yaris / Vitz Discussion	16	02-24-2015 01:05 AM
CAM TIMING	jt258	Performance Modifications	21	11-12-2009 12:50 PM
australian vs american models: timing chain	hoobyjuice	DIY / Maintenance / Service	3	06-16-2009 09:25 AM
OBD2 scan tool to save fuel worth it?	ezhacker1	Fuel Economy Forum	11	05-08-2009 09:04 AM
Timing chain, sprockets, & cam position sensor problems?	PetersRedYaris	DIY / Maintenance / Service	8	01-04-2007 11:50 AM

02-21-2010, 08:36 AM	#2
DerFlosser Drives: Yaris Join Date: Apr 2009 Location: USA Posts: 355	I haven't been inside this motor but did you mark the position of the chain and sprocket(S) when you the cams. I am assuming that there are timing marks on bearing caps to the front and the cam base. Obviously, everything should line up at TDC so then it comes down to possibly having slack in the chain if not marked prior to removal.