Imaginary STF build

[Ben_]

Hey guys,

I don't have money to spend on lots of expensive parts plus next season for Utah region SCCA doesn't begin till next March, but I still love writing up potential builds. Here is one for the STF class, which has a pax of 0.801 compared to the HS pax of 0.797. Not a huge difference for the MUCH greater possibility to maximize the performance of our little cars! This build has parts with bang for buck and performance in mind.

So beginning from the ground up, since that is the best way to build a car for auto-x IMO.

http://www.tirerack.com/tires/tires....R5GFR&i1_Qty=4

225-45-15 BFG Rivals maximizing the tire width limit of STF, maximizing the UTQG limit of 200 for 2015, and keeping a small diameter for gearing benefits

http://www.tirerack.com/wheels/Wheel...&association=2

Advanti Storm S1 15x7 e35 which is the exact width to match the tires also is within width limits of STF and is more budget oriented than Enkei RPF1 but is only 1 pound heavier per rim

All of the following are available on Micro Image

R1 concepts drilled and slotted rotors with carbotech track pads, SS brake lines and custom venting from the fog light holes or lower bumper grill rear brakes must remain drums to keep the factory parking brake

Whiteline 23mm rear antiroll bar, Megan Coilovers

micro image intake manifold, 1.8L TB, AFE 1.8L intake, remove plastic engine cover

Megan Header, custom 2.25" straight pipe with high flow cat

APEXI AFC-neo piggyback tuner

DENSO spark plugs, MI lightweight crank pulley, K&N oil filter

Micro Image shifter cage bushings, MI shifter cable bushings, MI short shift kit


Total Cost = 4586.94 + shipping + tuning + exhaust fab