DIY Cruise Control FAQ (2006-2010 Yaris) - Page 21 - Toyota Yaris Forums

CTScott · 08-18-2013, 02:38 PM

Quote:

Originally Posted by YarisBasic

is anyone know, will the Rostra cc kit work on Australia model (2007) manual sedan,

Thank

Lewis

I am about 90% sure that the older (discontinued) Rostra kit will work with any of the non-US Yaris that do not have cruise control functionality built into the ECM. The newer kits definitely will not as they are just an overpriced version of the parts that I sell and require the ECM to have the functionality.

YarisBasic · 08-20-2013, 09:05 AM

do you have the Rostra kit part no.? or do you sell the older kit?

Thanks

CTScott · 08-20-2013, 10:39 AM

Quote:

Originally Posted by YarisBasic

do you have the Rostra kit part no.? or do you sell the older kit?

Thanks

The discontinued Rostra kit was 250-1797 for MT and 250-1796 for AT.

I actually have one of the kits in my possession.

trionons · 10-09-2013, 06:26 AM

Hi, I'm from the Ukraine and i have a 2012 Corolla, 1.33 1NR-FE. This version made in Japan only for Russia, Ukraine and other countries of the former USSR. Quation is simply: would cruise work on my Corolla? Because i now, that on 1.6 Corolla it work http://www.toyotaownersclub.com/foru...-instructions/, but in my case it not (( I can tell, I have tried to check voltage between ECM 40 Pin and Ground when ignition On, but result is 0v ! Maybe it not the fact, that ECM for Yaris and Corolla are same? But how to know which pin to check in Corolla 1.33 1NR-FE?

CTScott · 10-09-2013, 07:09 AM

Quote:

Originally Posted by trionons

Hi, I'm from the Ukraine and i have a 2012 Corolla, 1.33 1NR-FE. This version made in Japan only for Russia, Ukraine and other countries of the former USSR. Quation is simply: would cruise work on my Corolla? Because i now, that on 1.6 Corolla it work http://www.toyotaownersclub.com/foru...-instructions/, but in my case it not (( I can tell, I have tried to check voltage between ECM 40 Pin and Ground when ignition On, but result is 0v ! Maybe it not the fact, that ECM for Yaris and Corolla are same? But how to know which pin to check in Corolla 1.33 1NR-FE?

Do the connectors on the ECM on your Corolla look like the 2006-2011 Yaris connectors or like the 2012+ Yaris connectors?

2006-2011:
2006-2011.png

2012+:
2012.jpg
2012-2.jpg

trionons · 10-09-2013, 08:01 AM

Look like 2006-2011.

CTScott · 10-09-2013, 08:29 AM

Quote:

Originally Posted by trionons

Look like 2006-2011.

OK. In that case from what I have seen of other Toyota vehicles that use that same connector (the Camry for instance), cruise control is pin 40 of the smaller connector as well. So, that means that you reading 0V on that pin on yours likely means no cruise control for you.

trionons · 10-09-2013, 09:02 AM

Miserably, but I need to hear it from you to calm down ))
In other words: it just does not provide by the firmware ECM.
Anyway, good-bye cruise!

CTScott · 10-09-2013, 09:16 AM

Quote:

Originally Posted by trionons

Miserably, but I need to hear it from you to calm down ))
In other words: it just does not provide by the firmware ECM.
Anyway, good-bye cruise!

Unfortunately correct.

exidus · 11-24-2013, 08:27 PM

Hi Guys,
Have been using the CC on my Thailand built Camry for almost 5 months now and enjoying every minute of it. Again thanks to CTScott.

white_rice · 12-28-2013, 02:45 PM

Hi Scott (or anyone else who might have some insight). My friend has a 2004 Toyota Echo 2 door Hatchback (non RS). He wants to know if there is a DIY Cruise Control method like this for his car as well. He really wants cruise added for his daily work commute. I told him if anyone knows it will be the guys on here.

CTScott · 12-28-2013, 06:06 PM

Quote:

Originally Posted by white_rice

Hi Scott (or anyone else who might have some insight). My friend has a 2004 Toyota Echo 2 door Hatchback (non RS). He wants to know if there is a DIY Cruise Control method like this for his car as well. He really wants cruise added for his daily work commute. I told him if anyone knows it will be the guys on here.

No. The Echo was cable throttle, so installing cruise control would mean adding a vacuum operated throttle cable actuator as well as the electronics to control it.

abarson · 12-28-2013, 08:22 PM

I bought the stalk for my '10 sedan on ebay, but the car got wrecked before I installed it.
I've got a '12 sedan AT, with what seems to be a partial Power Package (windows only, not locks, etc.). I'm assuming that the stalk is the same? Any idea what the wiring requirements are for this year/model?

I've also read the tutorial multiple times, but remain a bit confused about D3. I get that there are supposed to be 3 wires in it-one of them being ground and two that are added-but where is the other end of the wires?

white_rice · 12-29-2013, 10:45 AM

Quote:

Originally Posted by CTScott

No. The Echo was cable throttle, so installing cruise control would mean adding a vacuum operated throttle cable actuator as well as the electronics to control it.

Thanks Scott, So I'm gathering his best bet would be to find a wrecked RS version (or any one equipped with factory cruise) and just swap over all of the OEM components.

CTScott · 12-29-2013, 11:06 AM

Quote:

Originally Posted by white_rice

Thanks Scott, So I'm gathering his best bet would be to find a wrecked RS version (or any one equipped with factory cruise) and just swap over all of the OEM components.

That would be the best bet, as it would be pretty expensive to purchase all of the parts separately.

CTScott · 12-29-2013, 11:10 AM

Quote:

Originally Posted by abarson

I bought the stalk for my '10 sedan on ebay, but the car got wrecked before I installed it.
I've got a '12 sedan AT, with what seems to be a partial Power Package (windows only, not locks, etc.). I'm assuming that the stalk is the same? Any idea what the wiring requirements are for this year/model?

I've also read the tutorial multiple times, but remain a bit confused about D3. I get that there are supposed to be 3 wires in it-one of them being ground and two that are added-but where is the other end of the wires?

The stalk is the same for '10 and '12.

Did you look at your D3 connector yet? If you have the three wires there, then you just need to install the stalk. If you do not, then one goes to ground and the other to the ECM connector. See my complete DIY below for details:

http://www.yarisworld.com/forums/showthread.php?t=33750

abarson · 12-30-2013, 03:47 PM

It works! Took an hour only because the horn wire broke. D3 was already wired, although the block looks different on the 2012.
Thanks so much for posting this tutorial!

Neil-R · 02-20-2014, 02:29 PM

Thank you so much for this thread! I have a Base Yaris which could benefit from CC.

CTScott, Do you still sell the switch and wires needed to do this modification?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 10:12 PM

08-20-2013, 09:05 AM	#362
YarisBasic Drives: YRX Black 4 doors seden Join Date: May 2011 Location: Western Australia Posts: 7	do you have the Rostra kit part no.? or do you sell the older kit? Thanks

10-09-2013, 06:26 AM	#364
trionons Drives: Toyota Corolla Join Date: Oct 2013 Location: Ukraine Posts: 3	Hi, I'm from the Ukraine and i have a 2012 Corolla, 1.33 1NR-FE. This version made in Japan only for Russia, Ukraine and other countries of the former USSR. Quation is simply: would cruise work on my Corolla? Because i now, that on 1.6 Corolla it work http://www.toyotaownersclub.com/foru...-instructions/, but in my case it not (( I can tell, I have tried to check voltage between ECM 40 Pin and Ground when ignition On, but result is 0v ! Maybe it not the fact, that ECM for Yaris and Corolla are same? But how to know which pin to check in Corolla 1.33 1NR-FE?

10-09-2013, 08:01 AM	#366
trionons Drives: Toyota Corolla Join Date: Oct 2013 Location: Ukraine Posts: 3	Look like 2006-2011.

10-09-2013, 09:02 AM	#368
trionons Drives: Toyota Corolla Join Date: Oct 2013 Location: Ukraine Posts: 3	Miserably, but I need to hear it from you to calm down )) In other words: it just does not provide by the firmware ECM. Anyway, good-bye cruise!

11-24-2013, 08:27 PM	#370
exidus Drives: toyota Join Date: May 2013 Location: kuala lumpur Posts: 2	Hi Guys, Have been using the CC on my Thailand built Camry for almost 5 months now and enjoying every minute of it. Again thanks to CTScott.

12-28-2013, 02:45 PM	#371
white_rice Drives: 2008 Toyota Yaris LE Join Date: Sep 2009 Location: Ontario, Canada Posts: 266	Hi Scott (or anyone else who might have some insight). My friend has a 2004 Toyota Echo 2 door Hatchback (non RS). He wants to know if there is a DIY Cruise Control method like this for his car as well. He really wants cruise added for his daily work commute. I told him if anyone knows it will be the guys on here.

12-28-2013, 08:22 PM	#373
abarson Drives: 2010 Yaris Sedaon Join Date: Sep 2010 Location: Santa Cruz Posts: 4	I bought the stalk for my '10 sedan on ebay, but the car got wrecked before I installed it. I've got a '12 sedan AT, with what seems to be a partial Power Package (windows only, not locks, etc.). I'm assuming that the stalk is the same? Any idea what the wiring requirements are for this year/model? I've also read the tutorial multiple times, but remain a bit confused about D3. I get that there are supposed to be 3 wires in it-one of them being ground and two that are added-but where is the other end of the wires?

12-30-2013, 03:47 PM	#377
abarson Drives: 2010 Yaris Sedaon Join Date: Sep 2010 Location: Santa Cruz Posts: 4	It works! Took an hour only because the horn wire broke. D3 was already wired, although the block looks different on the 2012. Thanks so much for posting this tutorial!

02-20-2014, 02:29 PM	#378
Neil-R I've made a post! Drives: 2010 Yaris 5dr Base Join Date: Feb 2014 Location: Ohio Posts: 1	Thank you so much for this thread! I have a Base Yaris which could benefit from CC. CTScott, Do you still sell the switch and wires needed to do this modification?