Need a little wiring help? - Toyota Yaris Forums

weapon5 · 11-04-2010, 01:49 PM

Hey guys I am trying to install a bulldog remote starter rs1100 system and i am having an issue with it.

issue when i press the button it will crank than dies?
any clue.

I was thinking my wiring off since i found a thread on here and also using the bulldog wire diagram and they are both way different not even close.

so what do you guys think it is. (yes i have the bypass module) maybe someone on here have the same setup and made it work successfully. :D thanks for the reply.

Palmer812 · 11-04-2010, 04:16 PM

I don't know anything about Bulldog but there is one thing you can try. Put your key in the ignition but don't turn it on and then remote start it. That will tell you if your bypass is working or not. If the car starts and stays running the bypass isn't working. If it still shuts off something else is wrong. I don't know if the Bulldog has a tach signal or if it is voltage sensing.

CTScott · 11-04-2010, 04:21 PM

If it starts and then dies, typically that means that your tach wire is not correct. If it cranks and doesn't start, then you are dealing with a transponder key bypass issue.

weapon5 · 11-12-2010, 03:20 AM

crap i already ripped it apart lol getting a different remote starter now lol oh well. :D

11-04-2010, 01:49 PM	#1
weapon5 Drives: VITZ Join Date: Aug 2010 Location: MN Posts: 58	Need a little wiring help? Hey guys I am trying to install a bulldog remote starter rs1100 system and i am having an issue with it. issue when i press the button it will crank than dies? any clue. I was thinking my wiring off since i found a thread on here and also using the bulldog wire diagram and they are both way different not even close. so what do you guys think it is. (yes i have the bypass module) maybe someone on here have the same setup and made it work successfully. :D thanks for the reply.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Connecting wiring to small trailer	charles nelson	DIY / Maintenance / Service	8	04-24-2012 05:39 PM
Tapping into the aux wiring	stanger454	In Car Entertainment + Electronics (audio / video / alarm)	4	09-04-2010 09:08 PM
Wiring Pictures	MitchEvious	In Car Entertainment + Electronics (audio / video / alarm)	2	12-28-2009 11:43 AM
Installing Trailer Light Harness	vandallen	DIY / Maintenance / Service	6	04-25-2009 08:11 PM
Wiring color code for 2008 LB?	charles nelson	DIY / Maintenance / Service	0	04-25-2009 03:56 PM

11-04-2010, 04:16 PM	#2
Palmer812 Drives: 2010 Meteorite Metallic LB Join Date: Feb 2010 Location: North Carolina Posts: 251	I don't know anything about Bulldog but there is one thing you can try. Put your key in the ignition but don't turn it on and then remote start it. That will tell you if your bypass is working or not. If the car starts and stays running the bypass isn't working. If it still shuts off something else is wrong. I don't know if the Bulldog has a tach signal or if it is voltage sensing.

11-04-2010, 04:21 PM	#3
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	If it starts and then dies, typically that means that your tach wire is not correct. If it cranks and doesn't start, then you are dealing with a transponder key bypass issue.

11-12-2010, 03:20 AM	#4
weapon5 Drives: VITZ Join Date: Aug 2010 Location: MN Posts: 58	crap i already ripped it apart lol getting a different remote starter now lol oh well. :D