|
05-21-2013, 10:42 PM | #1 |
I've made a post!
Drives: 2003 toyota Echo Join Date: May 2013
Location: Sydney, Australia
Posts: 1
|
Flywheel question-1nz conversion-2003 Model
Gidday Guys
I have 2003 Toyota Yaris/Echo Hatch. I have just pulled out the 2nZ 1.3 motor, and about to lower in the 1nz 1.5 motor. The problem I have is the 1.5 1nz was an automatic, so I have just pulled off the torque convertor and flex plate, I have sat the flywheel on. The flywheel fits from 2nz to 1nz which is good, but I have no way of aligning the flywheel. Most people say just mark the flywheel as you remove it, but this engine never had a flywheel. As some people know the back of the flywheel has 5 holes (that don;t go all the way through) In line with the middle hole is a white spot, this appears to be the thing to use to put it on correctly?? Question 1: Does it matter Question 2: What do I align it with. Any help would be great. Thanks Aftermarket repair books don't seem to mention it. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[WTS] Brand New Sport Rims | 1151127 | Items for Sale by private party | 20 | 03-21-2013 11:28 PM |
Most Reliable Makes of 2010 | 2007yariz | General Yaris / Vitz Discussion | 16 | 12-02-2010 03:37 PM |
HB base model back seat, question | Hotwheel | General Yaris / Vitz Discussion | 25 | 11-16-2009 02:40 AM |
flywheel question | White Yaris | DIY / Maintenance / Service | 4 | 03-16-2009 09:34 PM |
Power lock conversion question | mybabygirl | DIY / Maintenance / Service | 9 | 04-08-2007 07:47 PM |