Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Forced Induction Forum
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 01-28-2018, 04:13 PM   #1
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Blitz supercharger - coupler going bad?

I made another thread a week or two ago about an odd noise my Yaris was making. I'm fairly certain I have it narrowed down to being in the supercharger. I took the belt loose and ran the car for a bit with the belt off to eliminiate it being the alt, water pump, etc. The noise persisted. After turning the car off, I fiddled with the Blitz a bit by hand. Notice the noise it makes (pardon the audio problems due to a neighbor having a target shooting session). Does this sound like a bad coupler to you guys? Anyone have any luck getting parts for these? I've emailed Blitz USA a few times but they never respond.

https://www.youtube.com/watch?v=jyGlzQ36fYs
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47

Last edited by 47_MasoN_47; 02-04-2018 at 01:56 PM.
47_MasoN_47 is offline   Reply With Quote
Old 01-28-2018, 08:20 PM   #2
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Sounds like the bearing in the extension is shot (the one within the end where the pulley sits). That bearing takes way too much abuse for a little 6301-ZZ-C3 bearing.
__________________
CTScott is offline   Reply With Quote
Old 01-29-2018, 10:50 PM   #3
Bluevitz-rs
1NZ-6spd
 
Bluevitz-rs's Avatar
 
Drives: '05 6-Spd Vitz RS
Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,966
how hard is it so disassemble that extension housing?
Bluevitz-rs is offline   Reply With Quote
Old 01-30-2018, 10:40 AM   #4
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
I'm wondering the same thing. I haven't found any sort of disassembly manual online for the Blitz. I'm guessing there's oil in the snout as well.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 01-31-2018, 08:54 PM   #5
bairjo
 

Join Date: Feb 2010
Posts: 603
Quote:
Originally Posted by CTScott View Post
Sounds like the bearing in the extension is shot (the one within the end where the pulley sits). That bearing takes way too much abuse for a little 6301-ZZ-C3 bearing.
CTScott..Good to see you back.
bairjo is offline   Reply With Quote
Old 02-04-2018, 11:58 AM   #6
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
So after reading these 2 threads, I think I may be in over my head here.

http://www.yarisworld.com/forums/showthread.php?t=54088

http://www.yarisworld.com/forums/showthread.php?t=51019

I'm gonna go out and see if I can take the snout apart to look for damage shortly. If it's messed up, what are my options? Sounds like Blitz/Ogura aren't interested in providing any support or parts.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 02-04-2018, 01:53 PM   #7
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Good grief I forgot how tight things are working on this car... I got the 1 bolt and 2 nuts off the firewall-side (under the fuel rail) for the blower but the front ones are being a real problem. Can't seem to find a wrench the right size to get up under there. Anyway, having the top off of it allowed me to listen to the noise more. I don't know anything about working on blowers, but it sounds to me like the noise is coming from the chamber where the rotors are, not the nosecone. I'd think since these are 2 sealed chambers, the noise would be much quieter inside the rotor area if it was a nosecone bearing. I could certainly be wrong though. I'll defer to those with more experience. Here's another short video.

https://www.youtube.com/watch?v=P5O0KHUmaTc

Weren't we able to embed YT videos at one point? I can't seem to get it to work now.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 02-04-2018, 04:02 PM   #8
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Alright, blower totally removed. Contacted a company called Kawi Performance out of New York. Apparently these same Oruga superchargers are used on Kawasaki jetskis. They offer rebuilds and whatnot, so I'm going to send it off to them. They said they'd check it all out and give me a quote on what it cost to rebuild, if it's not totally hosed. If it's too much, I guess I'll be in the market for a factory intake manifold :(
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 02-07-2018, 09:06 PM   #9
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
So apparently at some point it ran out of oil or something like that, and it chewed the gears up. They said they don't have any gears at the shop there. Anyone have any idea where to get spare parts for these?

Kiwa says that Blitz/Ogura refuse to sell parts. Great. Screw you Blitz, I'll never buy anything with your name on it again.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
List of Boosted Yarisworld Members whooppee777 Forced Induction Forum 262 11-23-2022 05:49 AM
Greddy Emanage Blue and Blitz Supercharger KTS Forced Induction Forum 14 04-14-2017 11:07 AM
Blitz Supercharger Wiring Question KTS Forced Induction Forum 29 09-06-2015 04:45 PM
Wtb blitz supercharger casing part Radou Willing to Buy by private party 5 02-11-2014 07:43 PM
anyone with Blitz supercharger? yrsdrgn Performance Modifications 52 08-24-2010 07:57 AM


All times are GMT -4. The time now is 06:35 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.