Need help on vibration. - Toyota Yaris Forums

Red Horse · 10-31-2008, 09:24 PM

I just change my oil & fillter today, I used 3 qt. and 1 cup of royal purple syntetic 5w-30 and a mobil 1 103 filter. I followed the DIY correctly,but whenever i drive around then stop,feel a vibration for 1 or 2 second only and it was'nt there before i change oil. Should i put more oil? or its too much? cause im having a hard time to see the measurement of the light purple oil on the dip stick.

b_hickman11 · 10-31-2008, 09:45 PM

You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.

gid · 10-31-2008, 11:03 PM

Quote:

Originally Posted by b_hickman11

You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.

the car will be at the FULL mark with only 3 and 1/2 quarts . Just did oil change yesterday and is at FULL . This has been the case since we've ownd both YARIS and a '07 PRIUS .

touroxin · 10-31-2008, 11:07 PM

I can second that. It took 3 and a half quarts when I did my oil change last weekend.

Red Horse · 11-01-2008, 03:48 PM

thanks for the help. I just added half on the 4th and now it runs fine.

10-31-2008, 09:24 PM	#1
Red Horse View User's Garage Drives: 2008 Yaris sedan A/T Join Date: Oct 2008 Location: Costa mesa, California Posts: 353	Need help on vibration. I just change my oil & fillter today, I used 3 qt. and 1 cup of royal purple syntetic 5w-30 and a mobil 1 103 filter. I followed the DIY correctly,but whenever i drive around then stop,feel a vibration for 1 or 2 second only and it was'nt there before i change oil. Should i put more oil? or its too much? cause im having a hard time to see the measurement of the light purple oil on the dip stick.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post-rotation vibration	kurokoma-kun	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	9	09-15-2007 05:02 PM
NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning)	NonStopTuning	NonStopTuning	224	05-17-2007 07:40 AM
ZPIracing Yaris Pulley	ZPIracing	Performance Modifications	19	05-15-2007 01:51 PM
Crankshaft pulley	PuntangRacing	Performance Modifications	49	12-23-2006 01:17 AM
Vibration	dandj	General Yaris / Vitz Discussion	1	09-02-2006 04:11 PM

10-31-2008, 09:45 PM	#2
b_hickman11 Drives: 08 Sedan Join Date: Oct 2008 Location: Tyler, TX Posts: 899	You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.

10-31-2008, 11:07 PM	#4
touroxin Drives: 2008 Yaris 5M Blazing Blue HB Join Date: Oct 2008 Location: California Posts: 12	I can second that. It took 3 and a half quarts when I did my oil change last weekend.

11-01-2008, 03:48 PM	#5
Red Horse View User's Garage Drives: 2008 Yaris sedan A/T Join Date: Oct 2008 Location: Costa mesa, California Posts: 353	thanks for the help. I just added half on the 4th and now it runs fine.