16x8 Rims w 205/45/16 - Toyota Yaris Forums

hatchbackkid82 · 05-17-2010, 12:00 PM

Hi sorry to sound like a noob, but does anyone know if this will work with out rubbing. 16X8 on 205/45/16. I've tried the search bar and i couldn't find anything. My car is lowered on Tigertecs. I was thinking about these just want to make sure i'm not going to have any fitment issues. Thanks for any help

marcus · 05-17-2010, 12:25 PM

might work for the rear but not front..

hatchbackkid82 · 05-17-2010, 12:37 PM

Damn

!!!!! Can anyone confirm this

. It's a good thing i didn't place my order. Yeah i was noticing that a lot of people are running 7 inch wide rims in the front.

33OH · 05-17-2010, 12:50 PM

Most likely will rub, but what is the offset?

hatchbackkid82 · 05-17-2010, 01:07 PM

Uhhhhh I'm an offset idiot. I don't even know sorry

WeeYari · 05-17-2010, 01:10 PM

^ should be listed in the wheel specs on whatever site it was you snagged the pic from. Offset number is going to be critical with these wheels.

cali yaris · 05-17-2010, 01:14 PM

can't answer the question without the offset -- it's the most important piece of information.

It is possible to fit those wheels to the Yaris, but it has to be done just right, and you will be needing some camber.

coffiend · 05-17-2010, 01:53 PM

8" and a lower offset will rub without camber.

I'm on 15x7 with +15 offset and I even poke a bit up front and rub a little on hard turns.

But, if you want to put in some work with camber you can make it work.

But like Garm said, wiith no offset specs it's impossible to say wether or not they'll fit..

hatchbackkid82 · 05-17-2010, 03:00 PM

Here is what i found offset is 0
Specifications

Wheel Size 16x8
Color Gun Metal
Bolt Pattern 4-100/114.3
Offset 0
Lip Size 3.5"
Required Lug Nuts Tuner Style

cali yaris · 05-17-2010, 03:06 PM

+0 on a 16x8?

definitely POKE, you'd need a serious stretch tire to make that work.

hatchbackkid82 · 05-17-2010, 03:11 PM

so a 215 /45/16 tire wouldn't work then right? it would rub.

hatchbackkid82 · 05-17-2010, 03:12 PM

I really don't mind if rims come a lil far out i'm more worried about it rubbing the cai or the fender liner

cali yaris · 05-17-2010, 04:07 PM

yeah you are probably looking at a 195 stretched to make that work.

RacerFreakXXX · 05-17-2010, 06:46 PM

you would be better off with the 16x7 +38 version with a 205/50 or 205/45... though a 15x7 might look better, and would defiantly be lighter.

*kimona* · 05-17-2010, 10:17 PM

16x8, ET0, 195's? Good luck, mate! That'll be somewhere between tough and impossible to fit AND look right.

cali yaris · 05-17-2010, 10:57 PM

^ I think that stretch with ---camber would work. It's not a look I would go for, but that's not the point.

yarisugi · 05-18-2010, 12:59 AM

Don't do it... unless you have Garm's fender flares

33OH · 05-18-2010, 07:45 AM

Herb, I'd stick to a 16x7 with +35 offset to +40 unless you want to do some major trial and error with tire sizes and rubbing.

05-17-2010, 12:37 PM	#3
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Damn!!!!! Can anyone confirm this. It's a good thing i didn't place my order. Yeah i was noticing that a lot of people are running 7 inch wide rims in the front.

05-17-2010, 01:10 PM	#6
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	^ should be listed in the wheel specs on whatever site it was you snagged the pic from. Offset number is going to be critical with these wheels. __________________

05-17-2010, 01:53 PM	#8
coffiend View User's Garage Drives: 08 Black LB Join Date: Jun 2009 Location: Omaha, NE Posts: 448	8" and a lower offset will rub without camber. I'm on 15x7 with +15 offset and I even poke a bit up front and rub a little on hard turns. But, if you want to put in some work with camber you can make it work. But like Garm said, wiith no offset specs it's impossible to say wether or not they'll fit.. __________________

05-17-2010, 06:46 PM	#14
RacerFreakXXX JDM Fred View User's Garage Drives: 06 Mazda Miata Join Date: Oct 2008 Location: Somers NY Posts: 787	you would be better off with the 16x7 +38 version with a 205/50 or 205/45... though a 15x7 might look better, and would defiantly be lighter. __________________ 1990 Mazda Miata... I miss my Yaris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: 4 15" alloy rims	_Bravo_	Willing to Buy by private party	2	02-19-2010 06:39 PM
Looking for 15 inch stock steel rims	hop	Canada	2	01-21-2010 07:18 AM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 06:42 PM
Need help when ordering my tires and rims	thomasward00	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	04-26-2007 09:40 PM
hufeisen rims	JustYYaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	01-17-2007 03:16 PM

05-17-2010, 12:25 PM	#2
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	might work for the rear but not front..

05-17-2010, 12:50 PM	#4
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	Most likely will rub, but what is the offset?

05-17-2010, 01:07 PM	#5
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Uhhhhh I'm an offset idiot. I don't even know sorry

05-17-2010, 01:14 PM	#7
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	can't answer the question without the offset -- it's the most important piece of information. It is possible to fit those wheels to the Yaris, but it has to be done just right, and you will be needing some camber.

05-17-2010, 03:00 PM	#9
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Here is what i found offset is 0 Specifications Wheel Size 16x8 Color Gun Metal Bolt Pattern 4-100/114.3 Offset 0 Lip Size 3.5" Required Lug Nuts Tuner Style

05-17-2010, 03:06 PM	#10
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	+0 on a 16x8? definitely POKE, you'd need a serious stretch tire to make that work.

05-17-2010, 03:11 PM	#11
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	so a 215 /45/16 tire wouldn't work then right? it would rub.

05-17-2010, 03:12 PM	#12
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	I really don't mind if rims come a lil far out i'm more worried about it rubbing the cai or the fender liner

05-17-2010, 04:07 PM	#13
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	yeah you are probably looking at a 195 stretched to make that work.

05-17-2010, 10:17 PM	#15
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	16x8, ET0, 195's? Good luck, mate! That'll be somewhere between tough and impossible to fit AND look right.

05-17-2010, 10:57 PM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ I think that stretch with ---camber would work. It's not a look I would go for, but that's not the point.

05-18-2010, 12:59 AM	#17
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	Don't do it... unless you have Garm's fender flares

05-18-2010, 07:45 AM	#18
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	Herb, I'd stick to a 16x7 with +35 offset to +40 unless you want to do some major trial and error with tire sizes and rubbing.