Clutch Replacement - Toyota Yaris Forums

spiderweb1967 · 02-18-2017, 10:24 PM

I'm new to this forum so apologies if this has been answered. Is there a guide on replacing a clutch on a US model 2013? It's been years since I did a clutch and that was on a rear wheel drive which I know is much easier.

tmontague · 02-18-2017, 10:41 PM

I know there was one kicking around when I googled it last year on Toyota nation, not sure if it is still there or not. it was written by a Toyota tech and explains how he changed his on clutch his way as opposed to the longer book way.

Essentially it was remove the air box, battery and tray. Support the engine with a jack and remove the trans mount. Remove all 9 bell housing bolts and pry the trans off of the engine. Now you'll have access to the clutch.

You'll have to remove the cv axles so you can drop down the trans. You can just zip off the ball joints and this will allow you enough movement of the strut to pull the cv axles without needing an alignment and saves you some time

spiderweb1967 · 02-18-2017, 11:08 PM

Thanks for taking the time

02-18-2017, 10:24 PM	#1
spiderweb1967 Drives: Stock Join Date: Feb 2017 Location: Ca Posts: 8	Clutch Replacement I'm new to this forum so apologies if this has been answered. Is there a guide on replacing a clutch on a US model 2013? It's been years since I did a clutch and that was on a rear wheel drive which I know is much easier.

02-18-2017, 10:41 PM	#2
tmontague View User's Garage Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012 Location: Caledonia Ont. Posts: 2,938	I know there was one kicking around when I googled it last year on Toyota nation, not sure if it is still there or not. it was written by a Toyota tech and explains how he changed his on clutch his way as opposed to the longer book way. Essentially it was remove the air box, battery and tray. Support the engine with a jack and remove the trans mount. Remove all 9 bell housing bolts and pry the trans off of the engine. Now you'll have access to the clutch. You'll have to remove the cv axles so you can drop down the trans. You can just zip off the ball joints and this will allow you enough movement of the strut to pull the cv axles without needing an alignment and saves you some time __________________ No one ever wants to give a Yaris the point by...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Maintenance	fnkngrv	DIY / Maintenance / Service	12	03-03-2017 10:42 AM
Aftermarket Clutch Q's	tmontague	Performance Modifications	5	03-05-2016 04:33 PM
Clutch Kit Replacement - Which brand to go with?	fourbangingfun	General Yaris / Vitz Discussion	5	07-04-2015 10:58 AM
Clutch Replacement	BobTheYaris	DIY / Maintenance / Service	3	03-25-2014 08:17 AM
'07 Yaris Clutch replacement	dinop	DIY / Maintenance / Service	12	04-22-2013 04:47 AM

02-18-2017, 11:08 PM	#3
spiderweb1967 Drives: Stock Join Date: Feb 2017 Location: Ca Posts: 8	Thanks for taking the time