|
|
|
|
Thread Tools | Display Modes |
06-27-2012, 06:55 PM | #1 |
Drives: ECHO NCP-12/2NZ-FE Join Date: Jun 2012
Location: Bahrain
Posts: 25
|
***2002 ECHO,Rear Apexi Coilovers to be modified to fit, Energy Sus bushings ***
Hello there Y-W members,
I Need your Help and Support to figure a way to install my rear coilovers, need a way to fix it Because of clearance Issue between the back wheels & tires. Apexi Coilovers SV Damper I just buy a JDM Apexi Full Coilovers for my Echo but i have to modifie the rear Coilovers to fit it in my TOYOTA Echo NCP12. A1.jpgA2.jpgA3.jpgA4.jpgA5.jpgA6.jpg The Measurements Tall 19 inch, centimeters 48.3 , mm 482, 0.4826 meter. Need to Measure the diameter to. For the space issue need to think for for the best solutions. Thinking of doing this and i have some other plans to i will update this thread later on. To make a fully welded brackets actually are stout and help prevent the springs from binding under hard side loads when cornering. or an adjustable bracket like the on below pic. ---------------------------------------------------------------------------------------------------- HYPER-FLEX Bushings Energy Suspension Parts as fallow, I have them @ home & i need to get the rest parts in order to complete my full Suspension HYPER-FLEX Bushings leave you the pics. E1.jpgE1s.jpgE2.jpgE2s.jpgE3.jpgE3s.jpgE3se.jpg Parts I Need to get: Whiteline (W53299) Control arm - lower inner rear bushing. link @ amazon site below. http://www.amazon.com/BUSH-KIT-CONTR...+rear+bushing. INSTALL GUIDE http://www.whiteline.com.au/docs/ins...ides/Z5118.pdf Ingalls Engineering 81260 Caster/Camber Adjusting Kit Fitment Notes: FRONT - REPLACES 14MM STRUT MOUNTING BOLTS +/- 2 DEG The idea Link Below, http://www.amazon.com/Ingalls-Engine...ype=automotive Need To modified the Lower Ball Joint & Front Outer Tie Rod End Bushing for the Maximum Driving Cornering Stability, so I think keeping the OEM Ball Joint & Front Outer Tie Rod and just change the Tie Rod / Ball Joint Dust Boots, So i need to do some Measurements to replace the OEM Dust Boots rubbers with a Dust Boots Made of HYPER-FLEX™ Performance Polyurethane from Energy-Suspension. Link For Universal Tie Rod / Ball Joint Dust Boots http://www.energysuspensionparts.com...Dust-Boots.asp Feel Free guys to give fresh idea, Thank in Advance
__________________
***High-Performance Cooling System***http://honda-tech.com/showthread.php?t=3062009 ***The Basics of Reading a Spark Plug***http://honda-tech.com/showthread.php?t=3063102 ALL-TECHwire Last edited by Hussain-Vtec; 06-28-2012 at 08:40 AM. |
|
|