AMK HEADER - Toyota Yaris Forums

C_03 · 12-29-2009, 04:57 AM

I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO?

jonismyname · 12-29-2009, 09:06 AM

Quote:

Originally Posted by C_03

I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO?

drill hole, weld bung.?

C_03 · 12-29-2009, 09:46 PM

and thats looks good?

ivanmadeline · 12-29-2009, 10:09 PM

Quote:

Originally Posted by C_03

I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO?

Desde cuando se necesita eso en pr???????????????

YarisSedan · 12-29-2009, 10:13 PM

Find a mufflershop to drill a hole and weld a o2 bung. Its not that hard shouldnt cost you more than 50 bucks.

C_03 · 12-29-2009, 10:32 PM

jajajaj lo q pasa es q no quiero tener el chek engine prendio siempre

ivanmadeline · 12-29-2009, 10:36 PM

como dice el de arriba llevalo a un muffler shop que te le anadan la tuerca para que le puedas adaptar el sensor. En la isla creo que lo hagan en todos los chop. por eso estrano la Isla tanto por los inventos que uno le puede hacer a los carros.

C_03 · 12-30-2009, 04:47 AM

SI LO Q QUIERO SABER ES Q SI DESPUES ESO SE VE FEO TAMBN ME DIJERON Q LO DEJARA ASI Y PUSIERA EL SENSOR AL PRINCIPIO DE LA TUBERIA DESPUES DEL HEADER

thebarber · 12-30-2009, 10:01 AM

sounds like you got a header for a first gen 1nzfe for an echo or xb....they don't have an 02 sensor bung like the yaris does.....and its not likely to line up w/ the midpipe

C_03 · 12-30-2009, 07:40 PM

I DONT KNOW BUT I BOUGHT THE HEADER ON EBAY AND SAID 07 + YARIS TAKE A LOOK

YarisSedan · 12-30-2009, 10:04 PM

Sorry but you got what you paid for. I never really buy any car parts from ebay. Only thing i got from my yaris from ebay was fog lights and even those didnt fit right. Everything else its from reputable sources.

YarisSedan · 12-30-2009, 10:06 PM

My friend bought a intake manifold from ebay once we had to sand down the flange where it mates to the cylinder head because it was such a horrible job. Not even a smooth flat surface. They are only mass produced cheap low quality parts which is why they are so cheap. Cheap and good are not general used in the same sentence.

1.5 · 01-13-2010, 11:19 AM

man when buying off ebay you really have to do your research. A good rule of thumb, never buy performance parts off ebay. Good luck tho.

cali yaris · 01-13-2010, 01:51 PM

You have to have a bung and O2 (air/fuel) sensor on your header. If it's actually for an xB (first gen), you'll have trouble lining up the exhaust also.

Looks don't matter, the header goes behind the motor anyway.

Someone should report the seller for misrepresenting that product to fit the Yaris.

1.5 · 01-13-2010, 10:20 PM

or you could file a dispute thru Paypal if you used them. One of the options for the dispute is "item did not match description" or something like that so you can file that and the seller will usually arrange a refund so he doesnt have bad marks against his ebay account.

Caribe · 01-14-2010, 01:39 PM

Le puedes soldar una tuerca con esa rosca detras del header, lo importante es que el sensor este antes del catalitico. En que pueblo estas?

eii · 01-20-2010, 08:38 AM

mhmm, i posted about this already. had a shop drill a hole and put a bung on it for the sensor. the collector doesnt fit perfectly to the midpipe like mentioned. possible leak, but ive been running it for months now without problems. made my yaris sound mean as hell though. people shit bricks when they hear it lol.

1.5 · 01-20-2010, 11:16 AM

eii lets get a vid

12-29-2009, 04:57 AM	#1
C_03 Drives: Yaris Silver Join Date: Dec 2009 Location: PR Posts: 5	AMK HEADER I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO?

12-29-2009, 10:13 PM	#5
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Find a mufflershop to drill a hole and weld a o2 bung. Its not that hard shouldnt cost you more than 50 bucks. __________________ http://www.cardomain.com/ride/3210549

12-30-2009, 10:01 AM	#9
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	sounds like you got a header for a first gen 1nzfe for an echo or xb....they don't have an 02 sensor bung like the yaris does.....and its not likely to line up w/ the midpipe __________________

12-30-2009, 10:04 PM	#11
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Sorry but you got what you paid for. I never really buy any car parts from ebay. Only thing i got from my yaris from ebay was fog lights and even those didnt fit right. Everything else its from reputable sources. __________________ http://www.cardomain.com/ride/3210549

12-30-2009, 10:06 PM	#12
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	My friend bought a intake manifold from ebay once we had to sand down the flange where it mates to the cylinder head because it was such a horrible job. Not even a smooth flat surface. They are only mass produced cheap low quality parts which is why they are so cheap. Cheap and good are not general used in the same sentence. __________________ http://www.cardomain.com/ride/3210549

12-29-2009, 09:46 PM	#3
C_03 Drives: Yaris Silver Join Date: Dec 2009 Location: PR Posts: 5	and thats looks good?

12-29-2009, 10:32 PM	#6
C_03 Drives: Yaris Silver Join Date: Dec 2009 Location: PR Posts: 5	jajajaj lo q pasa es q no quiero tener el chek engine prendio siempre

12-29-2009, 10:36 PM	#7
ivanmadeline View User's Garage Drives: 2008 Yaris (Sedan) Join Date: Oct 2008 Location: NC Posts: 61	como dice el de arriba llevalo a un muffler shop que te le anadan la tuerca para que le puedas adaptar el sensor. En la isla creo que lo hagan en todos los chop. por eso estrano la Isla tanto por los inventos que uno le puede hacer a los carros.

12-30-2009, 04:47 AM	#8
C_03 Drives: Yaris Silver Join Date: Dec 2009 Location: PR Posts: 5	SI LO Q QUIERO SABER ES Q SI DESPUES ESO SE VE FEO TAMBN ME DIJERON Q LO DEJARA ASI Y PUSIERA EL SENSOR AL PRINCIPIO DE LA TUBERIA DESPUES DEL HEADER

12-30-2009, 07:40 PM	#10
C_03 Drives: Yaris Silver Join Date: Dec 2009 Location: PR Posts: 5	I DONT KNOW BUT I BOUGHT THE HEADER ON EBAY AND SAID 07 + YARIS TAKE A LOOK

01-13-2010, 11:19 AM	#13
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	man when buying off ebay you really have to do your research. A good rule of thumb, never buy performance parts off ebay. Good luck tho. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

01-13-2010, 01:51 PM	#14
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	You have to have a bung and O2 (air/fuel) sensor on your header. If it's actually for an xB (first gen), you'll have trouble lining up the exhaust also. Looks don't matter, the header goes behind the motor anyway. Someone should report the seller for misrepresenting that product to fit the Yaris. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-13-2010, 10:20 PM	#15
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	or you could file a dispute thru Paypal if you used them. One of the options for the dispute is "item did not match description" or something like that so you can file that and the seller will usually arrange a refund so he doesnt have bad marks against his ebay account. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

01-14-2010, 01:39 PM	#16
Caribe Drives: 2008 Yaris hatchback Join Date: Jan 2009 Location: Mayaguez, Puerto Rico Posts: 3	Le puedes soldar una tuerca con esa rosca detras del header, lo importante es que el sensor este antes del catalitico. En que pueblo estas?

01-20-2010, 08:38 AM	#17
eii Rides canyon walls Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007 Location: Long Beach, CA Posts: 503	mhmm, i posted about this already. had a shop drill a hole and put a bung on it for the sensor. the collector doesnt fit perfectly to the midpipe like mentioned. possible leak, but ive been running it for months now without problems. made my yaris sound mean as hell though. people shit bricks when they hear it lol. __________________ OEM Style Wing Spoiler \| TRD Axle-Back Exhaust \| Megan Lowering Springs (1.5 f/r) \| Simota Carbon Charger Intake \| Python 871XP Alarm System \| Aluminum Sports Pedal \| 17x7 +42mm Enkei J10 Black w/ Silver Lip \| 205/40 Falken Ziex-912 \| NST Lite Crank Pulley Red \| 1ZZ-FE Throttle Body \| AMK Racing Header

01-20-2010, 11:16 AM	#18
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	eii lets get a vid __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DC Sports Header install and evaluation	Loren	Performance Modifications	217	07-04-2017 06:40 AM
Megan Racing header install and review with pics.	Herbicidal	Performance Modifications	6	09-03-2009 08:40 AM
Pre Hack Revival: Megan Racing Header vs Ebay Header	Sabretooth	Performance Modifications	15	08-19-2009 05:26 PM
AMK Racing Header	eii	Performance Modifications	55	07-11-2009 08:22 PM
Are We Still Stuck With the 4-1 Headers?	Sabretooth	Performance Modifications	31	02-20-2009 08:57 PM