|
06-25-2015, 03:29 PM | #415 |
I want to say the throttle response felt better after dropping in the K&N, but I haven't noticed significant change in mpg.
|
|
06-25-2015, 03:46 PM | #416 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
07-06-2015, 01:37 PM | #417 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Put a 5mm spacer in the driver side rear to try and even out the offset in the rear cause of our dumb crooked torsion beam. In this picture it looks like the left side pokes more, but it's probably cause of the angle. In person it looks more even :) I need an exhaust already.. By the way if anyone is going to Wekfest this Sunday, July 12th I will be there! Hit me up :D
Noticed a white Yaris parked next to me at work. I guess here's a stock vs. not picture too lol. I just like this picture, even though this is BEFORE the 5mm spacer. The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol. Last edited by TerenceCruz; 07-07-2015 at 01:36 AM. |
07-06-2015, 05:13 PM | #418 |
|
|
07-07-2015, 12:40 AM | #419 |
Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
|
Lookin' good man.. keep it up!
__________________
“On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna |
07-07-2015, 01:35 AM | #420 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
07-07-2015, 12:43 PM | #421 |
やりすぎだ~
|
|
07-07-2015, 04:12 PM | #422 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
07-07-2015, 08:09 PM | #423 |
Where is Wekfest at?
|
|
07-07-2015, 08:43 PM | #424 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
07-08-2015, 12:33 PM | #425 |
Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
|
Will your car be in the show?
__________________
“On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna |
07-08-2015, 11:30 PM | #426 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
07-09-2015, 12:19 AM | #427 |
Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
|
Its worth a shot! You don't see many slammed Yaris entering these events for a long time. It will be one of a kind in the show!
__________________
“On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna |
07-09-2015, 01:53 AM | #428 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Definitely true! I have a nasty gash and a door ding on my driver side sideskirt though Maybe I'll enter next year if I get the body damaged fixed, get a good exhaust system, and real deal wheels! Hahah. I appreciate it though, thanks for the kind words!
|
07-13-2015, 01:42 AM | #429 |
How much negative camber can you run up front once you installed 2 sets of camber bolts?
|
|
07-13-2015, 01:52 AM | #430 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
You're supposed to get like -3.5 camber with two bolts per side, since each give you +/- 1.75. But, I'm only running like -2.2, and I thought I installed em to max negative camber. Idk if I installed em right I guess, but the camber ended up being exactly what I wanted anyways, so it's all good haha.
|
07-13-2015, 10:48 AM | #431 |
I have one set of H&R bolts installed. Maxed out at -2.8, I'm shooting for -4.
|
|
07-15-2015, 03:34 AM | #432 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 Vitz RS Modellista Completed Car | Vitz Rs Modellista | Photo-Video-Media Gallery | 38 | 11-18-2014 12:25 PM |
2012 Vitz from the 2011 Tokyo Auto Salon | CTScott | Third Gen Yaris General Discussion | 14 | 02-10-2011 08:06 AM |
Is UA-NCP13 1.5L Manual Trans a Vitz RS? | WesSunday | General Yaris / Vitz Discussion | 1 | 11-28-2010 10:47 AM |
Newly refreshed 2011 Toyota Corolla | Kal-El | Off-topic / Other Cars / Everything else Discussions | 23 | 11-27-2010 12:57 PM |
A German Yaris/Vitz/Echo ;) | we-to-11 | Photo-Video-Media Gallery | 5 | 06-27-2007 08:26 PM |