Exhaust pics - Toyota Yaris Forums

ilikerice · 06-18-2011, 12:36 PM

I have been putting this off for a while cuz I havent had a chance to wash it.. here ya go.Tanabe madallion Concept G

AutoX is tomorrw so Pic and maybe a video or two may be available soon

aucorium · 06-18-2011, 12:50 PM

nice bru !! what are you going to do around the exhaust ? put in a heat cowl ?

cali yaris · 06-18-2011, 12:56 PM

The cut looks uneven, is it just the camera angle?

and yeah, an exhaust cowl would be really nice.

ilikerice · 06-18-2011, 01:46 PM

yes, the cut is uneven.. doing it with a drimmel was not fun.. I will look into the cowl idea.. good thought.. I had to cut cuz the exhaust outlet on the bumper was too far to the right.. so i had to extend it towards the center. Another reason i didnt wanna post pics up.. crappy job,but pondering ideas

fnkngrv · 06-18-2011, 02:27 PM

you'll figure it out.

ilikerice · 06-18-2011, 05:29 PM

http://www.mercedeswheels.com/upload...07eb88844f.jpg

I was thinking about cutting all the way to the other end like the exhaust side (but straight of course) and adding a type of diffuser there to fill in the gap. I dont know yet.. the cowl idea sounds pretty simple and easy too..

http://images01.olx.com/ui/4/23/44/6...-Car-Parts.jpg

Kaotic Lazagna · 06-18-2011, 11:53 PM

Quote:

Originally Posted by ilikerice

http://www.mercedeswheels.com/upload...07eb88844f.jpg

I was thinking about cutting all the way to the other end like the exhaust side (but straight of course) and adding a type of diffuser there to fill in the gap. I dont know yet.. the cowl idea sounds pretty simple and easy too..

http://images01.olx.com/ui/4/23/44/6...-Car-Parts.jpg

I like this idea!

lammy29 · 08-04-2011, 03:59 PM

any update on rear diffuser?

ilikerice · 08-04-2011, 05:12 PM

Negative.. Still in the brainstorming process..

also this:
http://www.yarisworld.com/forums/showthread.php?t=32749
Has been draining my money away slowly. I am thinking about just dropping this project and stick with the yaris.

bzinn 1 · 08-05-2011, 12:14 AM

I think what I would do since you got the cut kinda off center is tape offthat whole middle and remove it.It would bring up the middle of the bumper and look pretty clean.It would give it that lower on the side look like a drift car has....with a open rear to access with jack and such....would be sexy.

Take your time,goto autozone or parts store and get some pin stripe tape,it is just tape that is thin so you can make clean corners nice and round.use that to give you a guide line and then tape back from that .cut with dremel the materials to be removed,keep dremel at least 1/4" from the tape line....then take a palm sander with like 80 grit and sand away till you get to the tape line,it will take about an hour of sanding,take your time.....it will be sweet....that is the bumper I want to put on my HB as well.

ilikerice · 08-05-2011, 03:30 AM

Quote:

Originally Posted by bzinn 1

I think what I would do since you got the cut kinda off center is tape offthat whole middle and remove it.It would bring up the middle of the bumper and look pretty clean.It would give it that lower on the side look like a drift car has....with a open rear to access with jack and such....would be sexy.

thats is actually my original plan after i screwed up the first time. I need to take the bumper off cuz of the funny angles. But I agree, need to be patient.

Also been 110 degrees here with 120% humidity.. cant walk to my car without soaking wet from sweat. One of these afternoons ill tackle it.

06-18-2011, 12:36 PM	#1
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	Exhaust pics I have been putting this off for a while cuz I havent had a chance to wash it.. here ya go.Tanabe madallion Concept G AutoX is tomorrw so Pic and maybe a video or two may be available soon Attached Images

06-18-2011, 12:50 PM	#2
aucorium AKA Samurai Racer Drives: Yaris 2006 Join Date: Jul 2006 Location: South Africa Posts: 834	nice bru !! what are you going to do around the exhaust ? put in a heat cowl ? __________________ JDMtuner Import Performance Tuning www.jdmtuner.co.za

06-18-2011, 12:56 PM	#3
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	The cut looks uneven, is it just the camera angle? and yeah, an exhaust cowl would be really nice. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-18-2011, 02:27 PM	#5
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	you'll figure it out. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dual exhaust mounted on sedan (PICS)	auxmike	Performance Modifications	10	06-01-2009 09:28 PM
FS: Megan Racing Exhaust n Header.	Sabretooth	Items for Sale by private party	6	05-17-2009 05:04 PM
new 5zigen proracer exhaust 4 yaris	laszlo	Performance Modifications	13	08-16-2007 01:29 PM
GReddy prototype = Free Exhaust!	Chris_Lum	California	30	02-27-2007 10:13 PM
Fujitsubo Exhaust!!	MC-BPT	Sponsors Classifieds Area	17	11-16-2006 10:36 AM

06-18-2011, 01:46 PM	#4
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	yes, the cut is uneven.. doing it with a drimmel was not fun.. I will look into the cowl idea.. good thought.. I had to cut cuz the exhaust outlet on the bumper was too far to the right.. so i had to extend it towards the center. Another reason i didnt wanna post pics up.. crappy job,but pondering ideas

06-18-2011, 05:29 PM	#6
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	http://www.mercedeswheels.com/upload...07eb88844f.jpg I was thinking about cutting all the way to the other end like the exhaust side (but straight of course) and adding a type of diffuser there to fill in the gap. I dont know yet.. the cowl idea sounds pretty simple and easy too.. http://images01.olx.com/ui/4/23/44/6...-Car-Parts.jpg

08-04-2011, 03:59 PM	#8
lammy29 Drives: Yaris Join Date: Oct 2008 Location: Nottingham, UK Posts: 237	any update on rear diffuser?

08-04-2011, 05:12 PM	#9
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	Negative.. Still in the brainstorming process.. also this: http://www.yarisworld.com/forums/showthread.php?t=32749 Has been draining my money away slowly. I am thinking about just dropping this project and stick with the yaris.

08-05-2011, 12:14 AM	#10
bzinn 1 Drives: 2008 Yaris HB Join Date: Oct 2008 Location: University Place,WA Posts: 828	I think what I would do since you got the cut kinda off center is tape offthat whole middle and remove it.It would bring up the middle of the bumper and look pretty clean.It would give it that lower on the side look like a drift car has....with a open rear to access with jack and such....would be sexy. Take your time,goto autozone or parts store and get some pin stripe tape,it is just tape that is thin so you can make clean corners nice and round.use that to give you a guide line and then tape back from that .cut with dremel the materials to be removed,keep dremel at least 1/4" from the tape line....then take a palm sander with like 80 grit and sand away till you get to the tape line,it will take about an hour of sanding,take your time.....it will be sweet....that is the bumper I want to put on my HB as well.