|
11-10-2015, 12:02 PM | #1 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Researching Yaris S front spoiler for my 2009
I've been after one of these for a while! And now that I'm going to do a cosmetic rebuild/repaint on the front end of my 2009 2dr hatch at 240k miles I think I'm going to finally pull the trigger!
I'm essentially going to clone the car of a member here named The Barber... although with a 2009 as I believe his is an older model year. http://www.yarisworld.com/forums/showthread.php?t=39321 http://www.yarisworld.com/forums/showthread.php?t=40449 From my research I've found that the part number is for just the front splitter is PZ321-52032 and I've spoken to several places that are able to order it for a reasonable price. However there are two issues I've run into: 1- Is there anyone who has ordered the Yaris S front splitter that can tell me if it includes the plastic, angled fog lamp bezels, the plastic grill insert, or any sort of gasket used to mount it? If not does anyone know the part numbers for those? *I'm aware the stock bumper will have to have holes cut in it for mounting. That's fine as I'm actually buying an entirely new front bumper anyway. 2- Will I need a VIN Number from a Yaris S to officially order the part? The only place I spoke with over the phone said they could try to order it and see if it would take in the computer without a Yaris S VIN. However I didn't want to order until I have some sort of answer to the first question... The lower front spoiler/splitter is what I'm talking about: Last edited by firebird1999us; 11-10-2015 at 12:20 PM. |
11-12-2015, 02:10 PM | #2 |
Drives: 09 Yaris Join Date: Jul 2010
Location: Oregon
Posts: 123
|
what kind of price were you getting quoted?
|
11-12-2015, 09:59 PM | #3 |
I had my buddy parts guy at toyota tell me he does not need vin to order that part. He told me list price was like 450ish.
|
|
11-14-2015, 06:00 PM | #4 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
About $343 shipped... it was only like $20 for shipping.
Good... yeah it appears I can just add it to my cart so it doesn't seem like a VIN is even relevant. The problem is I have no information on the part being delivered other than that's the number and it's coming from a warehouse somewhere in California? Last edited by firebird1999us; 11-14-2015 at 06:17 PM. |
11-16-2015, 05:21 AM | #5 |
daily driver
|
The whole bumper is 1pc, there is no separate lip
iirc, the OEM lights attach fine in the back of the bumper and there is no shroud...the hole is just the right size
__________________
|
11-16-2015, 06:36 AM | #6 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
|
That is incorrect. Take a look at pics of your own car. There is a thin grey gasket running a long the edge of the lip. It is two pieces. Sent from my iPhone using Tapatalk
__________________
|
11-16-2015, 11:21 AM | #7 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
I'm trying to figure out where to get one of those said gaskets? Is that a common type of stripping?
|
11-16-2015, 12:50 PM | #8 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
|
I don't believe it would be considered common. It is rubber and shaped kinda like a laxy Y. The stem of the Y is glued to the back of the lip with one arm of the Y running along the top of the lip. The other arm of the Y then presses up against the bumper when the lip is secured in place. Toyota should be able to identify it.
__________________
|
11-16-2015, 12:55 PM | #9 |
PZ321-12801 - FITTING KIT, FRONT BUMPER
or...get some 3m grey moulding tape, cut into thin strips. There may be metal brackets or some time of brackets (zip tie maybe) to hold the rest of the bottom of the spoiler for reinforcement. my front lip (oem jdm) came with all mounting hardware, metal clips, moulding tape, alcohol.. the gasket is very similar to the one i used in the pic of my side skirt install (76925-52101-B1) |
|
11-27-2015, 12:49 PM | #10 | |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Quote:
|
|
11-27-2015, 06:41 PM | #11 |
Its the fitting kit for a front lip for a yaris s..cant tell u what yr
|
|
02-17-2016, 12:29 AM | #12 |
Im trying to replace both the lower and upper parts of the front bumper cover I see that the part number for the lower part is here what is the part number for the upper part?
|
|
02-17-2016, 08:52 AM | #13 |
Drives: '08 Yaris Sedan, Aero Package Join Date: Oct 2008
Location: Burlington, Ontario, Canada
Posts: 1,720
|
Rock Auto has the Bumper cover pre-drilled for RS. See link. Note: it's showing CAD, not the lesser US$.
http://www.rockauto.com/en/catalog/t...per+cover,1344
__________________
TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots. |
02-17-2016, 10:58 AM | #14 |
Does I can't tell from the pictures if it has the front spoiler on it already? Also has anyone put the sedan bumper cover on the liftback. I like the look of the sedan grill better
|
|
02-17-2016, 03:01 PM | #15 | |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
|
Quote:
No, a hatch bumper WILL NOT fit on a sedan.
__________________
|
|
02-18-2016, 04:22 PM | #16 |
Drives: '08 Yaris Sedan, Aero Package Join Date: Oct 2008
Location: Burlington, Ontario, Canada
Posts: 1,720
|
Each and every part must be purchased separately if dealing with Toyota.
__________________
TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
2009 Yaris Hatch Front Bar | GrayFox | Australia | 0 | 08-14-2015 04:51 AM |
Yaris RS + Rally Style Spoiler .. possible? | bigsky2 | General Yaris / Vitz Discussion | 41 | 03-07-2014 10:09 PM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |
2009 Yaris Sedan vs 2009 Scion XD | Jungle Rot | New YARIS Purchase Forum | 32 | 02-23-2009 05:40 PM |