|
10-09-2011, 07:48 PM | #1 |
Intake Manifold
What need to be modified on the XB manifold to fit on the yaris?
|
|
10-10-2011, 07:51 AM | #2 |
daily driver
|
replace the throttle body mounting flange (xb is 3 bolt, yaris is 4 bolt)
the angle of the intake/throttle body mount is different, so you'll want a short ram intake (vs stock or cai)
__________________
|
10-11-2011, 11:41 PM | #3 |
Drives: 2008 Yaris HB Join Date: Oct 2008
Location: University Place,WA
Posts: 828
|
I have actually seen one on an xA this summer.....nicely made piece,spendy....but nice.
from what I could see the plate just needs cleanly cut off with like a bandsaw or chop saw for metal....and any good shop that tig welds....think outside the box....motorcycle shops.....can make a new plate out of SS sheet and drill the new holes and tig it back on...it looks very doable. |
10-12-2011, 08:47 AM | #4 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
What im doing for the custom intake mani from the NOS Yaris I bought is using a Matrix TB spacer and having it welded on, then just bolting the Yaris TB up. Its basically an adapter.
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-12-2011, 10:05 AM | #5 |
Drives: Toyota Join Date: Mar 2010
Location: Singapore
Posts: 48
|
|
10-12-2011, 10:21 AM | #6 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
Here it is, I bought it from Jay. I will be posting pics once i get the TB spacer on it and send it off to get powdercoated. Here it is on his car from last year!
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-12-2011, 10:38 AM | #7 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Any plans for a dyno session?
|
10-12-2011, 10:58 AM | #8 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-14-2011, 10:00 PM | #9 |
Drives: Toyota Join Date: Mar 2010
Location: Singapore
Posts: 48
|
Thanks jekqmb.
|
10-14-2011, 10:27 PM | #10 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
Got the manifold today! Looks really good, here is another pic, lemme know if you want any other angles of it! Im getting a Polished TB adapter welded on Monday then the Mani is getting painted Dark metallic Purple Tuesday, then its going on wedsnday.
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-15-2011, 02:19 AM | #11 |
daily driver
|
isnt that manifold really only good for a turbo application?
__________________
|
10-15-2011, 02:54 PM | #12 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
Ya the XB one from weapon r is i heard, there is a guy here in st.louis using one na on his XB and only gained like 2whp.
Ill keep you guys updated on the one i got, i will be using it with nitrous. I wrote a review on Microcarmag.com about it, so follow along! http://www.microcarmag.com/product-s...nifold-review/
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-15-2011, 04:24 PM | #13 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Could you do me a huge favor and measure the openings and their spacing? I've got a corolla intake manifold that I'm going to modify for a 1.8L throttle body (like in this thread). The corolla openings are 35 x 52 mm and they are 87.5 mm apart.
Last edited by CrankyOldMan; 10-15-2011 at 08:16 PM. |
10-15-2011, 05:21 PM | #14 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
Sure will do! Im actually working on it right now sanding the old poopie paint off to prep for powdercoating!
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-15-2011, 05:43 PM | #15 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Thanks! I did a bit more searching and found that the cylinders are 75mm dia. and 8mm apart, so the spacing should be 83mm. Just need the opening dimensions and the bolt locations and I can get a CAD model rolling.
Last edited by CrankyOldMan; 10-15-2011 at 08:28 PM. |
10-15-2011, 08:11 PM | #16 | ||
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
The Weapon R one has longer runners but a poor plenum design. Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. Last edited by cali yaris; 10-15-2011 at 08:28 PM. |
||
10-15-2011, 09:07 PM | #17 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
Yea i do i need to find the sheet, i have to go digging for it! haha
__________________
You think your Yaris is low and fitted LOLzzzzz |
10-15-2011, 09:16 PM | #18 |
Local Sh*t Disturber
Drives: 2009 Yaris LB Join Date: Aug 2009
Location: STL
Posts: 591
|
So you need the inlet size and the bolt locations?
__________________
You think your Yaris is low and fitted LOLzzzzz |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom Intake Manifold + Direct Port Nitrous | blacksandiegovitz | Performance Modifications | 9 | 04-21-2010 07:05 PM |
Yaris Intake Manifold | richardholdener | Performance Modifications | 201 | 05-18-2009 11:58 AM |
Intake Manifold Gasket? | Nexus1155 | DIY / Maintenance / Service | 6 | 11-18-2008 08:03 PM |
Official Richard Holdener *MID-RANGE* Intake Manifold List | WolfWings | Performance Modifications | 59 | 11-13-2008 11:26 PM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |