hard time putting bumper back on - Toyota Yaris Forums

ezhacker1 · 05-02-2009, 11:20 PM

Taking off was the easy thing, but now im having a hard time putting it back on. i mean it snaps into place find "top of wheel" and i can put the pins back in on top, but im having a hard time putting the screws back on the bottom.

im not sure what over laps what, and where the screws go into...

ill search around some more, but man....

YAR1S · 05-02-2009, 11:28 PM

try putting in the bottom first, then the top???

ezhacker1 · 05-02-2009, 11:45 PM

it was the screws that was giving me a headache, in the time after i posted, i got all screws in but the ones with the white iono what to call it.

The flippy like tabs on the bottom of the bumper was confusing me. so all is left is to get the screws to go into the white things, one in the middle just spins around now.

kenkyd · 05-03-2009, 08:15 PM

i only screwed on the bolts that are into metal. the ones that screw into the clips i left out. i think its the 4 that have the hinged plastic piece.

thebarber · 05-03-2009, 08:59 PM

the pieces in front should be on the bottom so when youre driving water cant be forced in...

05-02-2009, 11:20 PM	#1
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	hard time putting bumper back on Taking off was the easy thing, but now im having a hard time putting it back on. i mean it snaps into place find "top of wheel" and i can put the pins back in on top, but im having a hard time putting the screws back on the bottom. im not sure what over laps what, and where the screws go into... ill search around some more, but man....

05-03-2009, 08:59 PM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	the pieces in front should be on the bottom so when youre driving water cant be forced in... __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thailand OEM/Aftermarket Group Buy Round 3!	eTiMaGo	Items for Sale by private party	45	10-29-2008 03:55 AM
Thailand OEM/Aftermarket Accessories and Bodykits GB Round 2!	eTiMaGo	Items for Sale by private party	118	09-10-2007 02:10 PM
HELP!!! I went back to the service center yesterday for the 7th time in 2 months!	Meldav86	General Yaris / Vitz Discussion	27	08-21-2007 09:04 PM
hard time installing fogs.	Blenjar	DIY / Maintenance / Service	13	03-29-2007 08:17 AM
Hard time choosing color; dark colored cars absorb more heat??	fantabulousbaby	New YARIS Purchase Forum	21	08-07-2006 07:53 PM

05-02-2009, 11:45 PM	#3
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	it was the screws that was giving me a headache, in the time after i posted, i got all screws in but the ones with the white iono what to call it. The flippy like tabs on the bottom of the bumper was confusing me. so all is left is to get the screws to go into the white things, one in the middle just spins around now.

05-03-2009, 08:15 PM	#4
kenkyd kanye Drives: 11 Corolla S Join Date: Oct 2008 Location: USA Posts: 88	i only screwed on the bolts that are into metal. the ones that screw into the clips i left out. i think its the 4 that have the hinged plastic piece.