Will these fit? - Toyota Yaris Forums

katchkillah · 09-13-2009, 10:20 PM

I've been debating as I've got some 16"x8.5" +32 rims I was gonna sell cause they wouldn't fit on a venza or xd but now my option to go the vitz route I could keep these 4x100 rims. You think these would fit? Don't worry on tires I usually run stretched so hopefully will try to run some tires to not rub if it will fit. also if will do a coilover set up so will be trying to go low without bags and cutting. but more curious if these rims will fit.

Tamago · 09-13-2009, 10:32 PM

Quote:

Originally Posted by katchkillah

I've been debating as I've got some 16"x8.5" +32 rims I was gonna sell cause they wouldn't fit on a venza or xd but now my option to go the vitz route I could keep these 4x100 rims. You think these would fit? Don't worry on tires I usually run stretched so hopefully will try to run some tires to not rub if it will fit. also if will do a coilover set up so will be trying to go low without bags and cutting. but more curious if these rims will fit.

no, won't work, you'll rub, even if you stretch.

katchkillah · 09-14-2009, 03:34 AM

ok thanks. no probs will just sell um. no biggie was just an option before i reknicked and didn't sell the rims. i guess i will have to roll on stocks for a bit and just order new rims from japan again.

Tamago · 09-14-2009, 06:17 AM

if they were 15's i'd be PM'ing you right now lol

katchkillah · 09-14-2009, 02:13 PM

Quote:

Originally Posted by Tamago

if they were 15's i'd be PM'ing you right now lol

lol, going 16's was killing me 15's never even thought of going that small.

Tamago · 09-14-2009, 03:23 PM

no good R-comps in 16"

kngrsll · 09-14-2009, 04:32 PM

and we dont make enough power to justify 17's lol

ROCKLAND TOYOTA · 09-14-2009, 04:36 PM

[QUOTE=katchkillah;384791 I was gonna sell cause they wouldn't fit on a venza or xd .[/QUOTE]

VENZA??? smallest wheel on a venza is 19 inches......

ern-diz · 09-14-2009, 05:26 PM

Quote:

Originally Posted by kngrsll

and we dont make enough power to justify 17's lol

hmm, interesting...i get around on 17's just fine and i've seen tons of yarii on this site that are rockin 18's...my car hugs freeway on ramps like an s.o.b. and i'm on stock suspension...

ozmdd · 09-14-2009, 05:56 PM

^Its not about the handling, its about the acceleration. The more rotating mass, the more energy it takes to get it rotating. We nerds call this 'inertia." ...or "inerd-tia." If your car is really slow and brown, it could be"inturd-tia."

Thank you...I'll be here all week!

kngrsll · 09-14-2009, 05:58 PM

Quote:

Originally Posted by ern-diz

hmm, interesting...i get around on 17's just fine and i've seen tons of yarii on this site that are rockin 18's...my car hugs freeway on ramps like an s.o.b. and i'm on stock suspension...

sarcasm bro

katchkillah · 09-14-2009, 07:34 PM

Quote:

Originally Posted by ROCKLAND TOYOTA

VENZA??? smallest wheel on a venza is 19 inches......

that's why i was gonna sell um and different bolt pattern too. but just a thought since these were 4x100. cause this extra set of rims i got have no use if i went with a venza or another xd. but i was eyeing out some nice rims for the venza, but the price was getting up there and couldn't imagine the shipping from japan on that weight. lol.

katchkillah · 09-14-2009, 07:35 PM

Quote:

Originally Posted by kngrsll

and we dont make enough power to justify 17's lol

what power? i have no reason for power this car only going down the street to get my wife to work and drop off my daughter in school. probably will take a month to fill up gas.

Speedjunkiejp · 09-15-2009, 10:15 AM

What kind of rims? They should work with camber lol..

katchkillah · 09-15-2009, 01:43 PM

ssr's, i've got another set but they ran really flush on my xb with no spacers. so i know that other set off ssr's won't fit for sure.

09-13-2009, 10:20 PM	#1
katchkillah Lost Drives: Toyota ist Join Date: Sep 2009 Location: Rock in the Middle of the Lake Posts: 70	Will these fit? I've been debating as I've got some 16"x8.5" +32 rims I was gonna sell cause they wouldn't fit on a venza or xd but now my option to go the vitz route I could keep these 4x100 rims. You think these would fit? Don't worry on tires I usually run stretched so hopefully will try to run some tires to not rub if it will fit. also if will do a coilover set up so will be trying to go low without bags and cutting. but more curious if these rims will fit.

09-14-2009, 04:32 PM	#7
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	and we dont make enough power to justify 17's lol __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

09-14-2009, 04:36 PM	#8
ROCKLAND TOYOTA TRIM HUNTER View User's Garage Drives: 2007 BLAZIN BLUE YARIS 3 DR Join Date: May 2006 Location: ROCKLAND COUNTY NY Posts: 2,088	[QUOTE=katchkillah;384791 I was gonna sell cause they wouldn't fit on a venza or xd .[/QUOTE] VENZA??? smallest wheel on a venza is 19 inches...... __________________ http://rocklandtoyota.com/IFrame.aspx?iFrameID=2388 TOYOTA PARTS AT A DISCOUNT........

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another rear spring option! Honda Fit springs!!	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	29	10-23-2009 05:02 PM
Test drove Rio5, Fit, and Yaris all today	kmf123kmf	New YARIS Purchase Forum	16	10-02-2009 07:48 PM
test fit 06-07 Yaris 4 door fog light	winson	California	15	01-13-2009 08:25 PM
I test drove a Yaris, Versa and FIT	CanadaCraig	New YARIS Purchase Forum	41	11-29-2008 09:18 PM
Test drove: Yaris sedan 5spd, Fit base auto, Civic LX 2dr 5spd	Bounty Hunter	General Yaris / Vitz Discussion	7	07-11-2007 07:40 AM

09-14-2009, 03:34 AM	#3
katchkillah Lost Drives: Toyota ist Join Date: Sep 2009 Location: Rock in the Middle of the Lake Posts: 70	ok thanks. no probs will just sell um. no biggie was just an option before i reknicked and didn't sell the rims. i guess i will have to roll on stocks for a bit and just order new rims from japan again.

09-14-2009, 05:56 PM	#10
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	^Its not about the handling, its about the acceleration. The more rotating mass, the more energy it takes to get it rotating. We nerds call this 'inertia." ...or "inerd-tia." If your car is really slow and brown, it could be"inturd-tia." Thank you...I'll be here all week!

09-15-2009, 10:15 AM	#14
Speedjunkiejp Drives: 07 Yaris Sedan Join Date: Aug 2009 Location: Jacksonville, FL Posts: 45	What kind of rims? They should work with camber lol..

09-15-2009, 01:43 PM	#15
katchkillah Lost Drives: Toyota ist Join Date: Sep 2009 Location: Rock in the Middle of the Lake Posts: 70	ssr's, i've got another set but they ran really flush on my xb with no spacers. so i know that other set off ssr's won't fit for sure.