Camcon ??? Will it work ??? - Toyota Yaris Forums

blacksandiegovitz · 05-25-2009, 07:15 PM

Hey all,
Found a used camcon for a pretty good deal , but I'm still weary about buying it , installing it , paying for dyno tuning time only to get minimal gains (like 1-2 hp) or have it over ridden by the ecu after a couple of weeks . I've serched and only found a few posts on Yw about the Camcon and none of them were conculsive . I have the basic modds aem ,header , nitto mid-pipe and hks axle back and the car is running rich as hell , so i'm really just trying to pull out some fuel and advance the timing. As far as I know nobody has successfully ran a afc or camcon on their yaris yet . What do everybody think ???
http://www.powerenterpriseusa.net/pr...con/camcon.htm

battleversiontc · 05-25-2009, 07:19 PM

ive seen em on 1st gen xbs and they only made like 5hp more when tuned correctly and havent heard of the ecu overriding cause alot of tc owners and xb owner i hang around with havent had any problems yet

sujonol78 · 12-08-2009, 12:01 AM

hi there
I am using APEXi Neo ( for AFR ) and Camcon ( for Timing ) in the same time.
in my opinion it worths the price and effort. my standard 1nz-fe with only Apexi Neo, TRD Clutch & Clutch cover, and custom muffler & piping can go up to 173Nm ( 4500 RPM ) and 132BHP ( 6000 RPM ), while the factory stock is only around 109 BHP.
i haven't done the dyno again with the Camcon installed, but it definitely increases the performance and response a lot.

it's by far a good combination and easy to use.

cheers

PETERPOOP · 12-08-2009, 12:29 AM

don't trust the butt dyno!

blacksandiegovitz · 12-08-2009, 10:48 AM

Quote:

Originally Posted by sujonol78

hi there
I am using APEXi Neo ( for AFR ) and Camcon ( for Timing ) in the same time.
in my opinion it worths the price and effort. my standard 1nz-fe with only Apexi Neo, TRD Clutch & Clutch cover, and custom muffler & piping can go up to 173Nm ( 4500 RPM ) and 132BHP ( 6000 RPM ), while the factory stock is only around 109 BHP.
i haven't done the dyno again with the Camcon installed, but it definitely increases the performance and response a lot.

it's by far a good combination and easy to use.

cheers

What year yaris is the apexi neo installed in ???

sujonol78 · 12-08-2009, 08:48 PM

mine is 2005 model with manual transmision

05-25-2009, 07:15 PM	#1
blacksandiegovitz Your mom goes to college View User's Garage Drives: 08 Vitz Join Date: Oct 2008 Location: Just chillin' out brah ! Posts: 1,434	Camcon ??? Will it work ??? Hey all, Found a used camcon for a pretty good deal , but I'm still weary about buying it , installing it , paying for dyno tuning time only to get minimal gains (like 1-2 hp) or have it over ridden by the ecu after a couple of weeks . I've serched and only found a few posts on Yw about the Camcon and none of them were conculsive . I have the basic modds aem ,header , nitto mid-pipe and hks axle back and the car is running rich as hell , so i'm really just trying to pull out some fuel and advance the timing. As far as I know nobody has successfully ran a afc or camcon on their yaris yet . What do everybody think ??? http://www.powerenterpriseusa.net/pr...con/camcon.htm __________________ Garm is permanently high because he is the king of smokin' deals!

05-25-2009, 07:19 PM	#2
battleversiontc View User's Garage Drives: 08 vip yaris Join Date: Oct 2008 Location: 808 Posts: 501	ive seen em on 1st gen xbs and they only made like 5hp more when tuned correctly and havent heard of the ecu overriding cause alot of tc owners and xb owner i hang around with havent had any problems yet __________________ 08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are you doing right now?	Bob_VT	Off-topic / Other Cars / Everything else Discussions	26819	12-31-2010 10:48 AM
CamCon 111B for the Yaris	YarisPR	Performance Modifications	36	12-08-2009 10:58 PM
Which of These Car Companies Will Go Bust First?	MAD DOG	Off-topic / Other Cars / Everything else Discussions	23	11-16-2008 10:50 PM
My Work, Your Work - Stories and Fun	SmallCarGuy	Off-topic / Other Cars / Everything else Discussions	0	09-02-2007 07:43 PM
Yarisworld Parts List - Work in progress	vodkalush	General Yaris / Vitz Discussion	5	02-13-2007 06:12 PM

12-08-2009, 12:01 AM	#3
sujonol78 Drives: 1nz-fe / MT Join Date: Dec 2009 Location: Indonesia Posts: 26	hi there I am using APEXi Neo ( for AFR ) and Camcon ( for Timing ) in the same time. in my opinion it worths the price and effort. my standard 1nz-fe with only Apexi Neo, TRD Clutch & Clutch cover, and custom muffler & piping can go up to 173Nm ( 4500 RPM ) and 132BHP ( 6000 RPM ), while the factory stock is only around 109 BHP. i haven't done the dyno again with the Camcon installed, but it definitely increases the performance and response a lot. it's by far a good combination and easy to use. cheers

12-08-2009, 12:29 AM	#4
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	don't trust the butt dyno!

12-08-2009, 08:48 PM	#6
sujonol78 Drives: 1nz-fe / MT Join Date: Dec 2009 Location: Indonesia Posts: 26	mine is 2005 model with manual transmision