Cruise control install 2009 Yaris 3 door - Toyota Yaris Forums

dbielawski · 08-13-2010, 11:38 AM

OK...here's my problem: 07 sedan, automatic, power windows, door locks & mirrors. Desperately need cruise! Ordered cruise stalk & cruise wiring harness plus ECM repair terminal (part # 82998-24250) and 2 spiral connector repair terminal (82998-12870) as I am lead to believe I need to run a wire from ECM to wheel as discussed in other discussions. I'm not overly comfortable doing this stuff so printed off forums, pictures, diagrams, etc. and dropped them off at my mechanic, who know what he is doing. He intalls cruise stalk and drills hole in wheel cover. I did order cover with cruise hole already in it but was shipped the one without the hole. Another whole long story I'll save for another time. Go to pick up the car and he says it doesn't work. He said there already was a wire at connector A21, pin 40. Is this possible? He also said he couldn't locate connector D3 under the steering wheel. I am lost!

I appreciate someone taking the time to take my hand and lead me through this. I have read and reread all the forums discussing installing cruise and STILL don't get it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
How difficult is it to install the aftermarket cruise control kit?	grampi	Performance Modifications	3	07-19-2007 08:06 AM

08-13-2010, 11:38 AM	#11
dbielawski Drives: 07 Yaris Join Date: Jun 2010 Location: Ontario, Canada Posts: 14	OK...here's my problem: 07 sedan, automatic, power windows, door locks & mirrors. Desperately need cruise! Ordered cruise stalk & cruise wiring harness plus ECM repair terminal (part # 82998-24250) and 2 spiral connector repair terminal (82998-12870) as I am lead to believe I need to run a wire from ECM to wheel as discussed in other discussions. I'm not overly comfortable doing this stuff so printed off forums, pictures, diagrams, etc. and dropped them off at my mechanic, who know what he is doing. He intalls cruise stalk and drills hole in wheel cover. I did order cover with cruise hole already in it but was shipped the one without the hole. Another whole long story I'll save for another time. Go to pick up the car and he says it doesn't work. He said there already was a wire at connector A21, pin 40. Is this possible? He also said he couldn't locate connector D3 under the steering wheel. I am lost! I appreciate someone taking the time to take my hand and lead me through this. I have read and reread all the forums discussing installing cruise and STILL don't get it.