18×9.5 & 18×10.5 on a yaris!? - Toyota Yaris Forums

Tylermayer · 11-14-2011, 12:02 AM

http://www.juststance.com/exclusive/nearly-impossible/

Yarice · 11-14-2011, 12:22 AM

Why

403RS · 11-14-2011, 12:24 AM

fapfapfap

cali yaris · 11-14-2011, 12:30 AM

uh, yeah....

vten · 11-14-2011, 10:03 AM

not hatin...but it's just not practical to do it here unless you know anyone in a bodyshop to do the bodywork and ready to blow some moolah. that setup is pretty common in Indonesia, since the labor is dirt cheap and they willing to do anything to please the customer ...unlike here... because the shop has a liability and still do a crappy job for most of them.

it's a hot stance indeed

cali yaris · 11-14-2011, 10:23 AM

I don't mind when it's done right, but that fender is jacked!

detroiter · 11-14-2011, 11:26 AM

Nearly Impossible!...To Use!

contraband831 · 11-14-2011, 11:45 AM

wow those fenders need help, hopefully they will get them pulled or something fabricated because they look chewed up!

Black_griffin6 · 11-14-2011, 09:18 PM

Quote:

Originally Posted by cali yaris

I don't mind when it's done right, but that fender is jacked!

I agree.

I don't mind the whole slammed look (It's not for me personally) but when you ruin your car to achieve it...what's the point?

wildmongoose26 · 11-14-2011, 11:46 PM

I could use those rear wheels no problem. Offset is probably pretty high, close to a +40 i'm guessing on the rear.

Those fenders are destroyed. More concerned with his expensive wide (high offset) rear wheels and less about actually making the body work with it.

And the car isnt even all that low. That back few the car is kinda high.

SAV912 · 11-15-2011, 02:16 AM

^ In what twisted world of sensibility is the back of that car high??

'Stanced' people really trip me out. That fender is jacked, the wheels aren't even hot, and the stretch is stupid. Pass.

This is a case of 'because everyone told me I can't, I tried.'

-C

eTiMaGo · 11-15-2011, 02:38 AM

all show no go... who cares about being fast if you can look like it? except... this car doesn't even look fast... dysfunctional, for sure though!

minken · 11-17-2011, 12:56 PM

luv it!

Kaykogi · 11-17-2011, 01:26 PM

I can hear the scraping sound from here.

Kendrik · 11-17-2011, 11:09 PM

wheels are too big. might have looked better in a 16s with the same width/offsets. slammed!(^_^)

Crandall · 11-17-2011, 11:58 PM

Dumber then a second coat of paint.

nevada · 11-19-2011, 07:35 PM

18x9 and 18x10.5 on Yaris is impossible to use. Unless you can rolled your Fender out then it will be find. You've got to modify the fender first before installing the Wheels.

Suitable size for 18" wheels on Yaris would be 18x8 Max. Use this size before and i've got no problem at all ...

CHeers

jekqmb · 11-20-2011, 11:20 PM

The Yaris can run an 18x10 no problem with the right camber adjustments and slight fender pull..... Too many people on this board are scared to push the limits. 16x10's have been done with zero modification on the Yaris......... I just think that Yaris is done awful and those fenders look like they were rolled with a bat and tapped with a hammer.

11-14-2011, 12:02 AM	#1
Tylermayer View User's Garage Drives: 2007 Toyota Yaris Join Date: May 2010 Location: Snohomish, WA Posts: 291	18×9.5 & 18×10.5 on a yaris!? http://www.juststance.com/exclusive/nearly-impossible/ __________________

11-14-2011, 12:22 AM	#2
Yarice Drives: 2008 LB Meteoric Metallic Join Date: Oct 2008 Location: Victorville, CA Posts: 200	Why __________________ 2008 Yaris 1999 Miata

11-14-2011, 12:30 AM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	uh, yeah.... __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-14-2011, 10:23 AM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I don't mind when it's done right, but that fender is jacked! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-14-2011, 11:26 AM	#7
detroiter Drives: 2008 Polar White LB Auto Join Date: Oct 2008 Location: Metro Detroit Posts: 1,238	Nearly Impossible!...To Use! __________________ I live my life a quarter pounder at a time. And for those 500 calories or more, I'm free. I need FRIES! Two of them. The big ones. Oh, and I need them tonight. You're lucky the double shot of BBQ sauce didn't blow the seam on your nugget box. There she is, 2 pounds of pure beef. My dad ate it in 9.0 seconds flat. Check it out, it's like this. If I lose, winner takes my happy meal. But if I win, I take the burger and the toy. To some people, that's more important.

11-14-2011, 12:24 AM	#3
403RS #yyc View User's Garage Drives: BSP '07 RS 5dr LB Join Date: Aug 2011 Location: Calgary, Canada Posts: 238	fapfapfap

11-14-2011, 10:03 AM	#5
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	not hatin...but it's just not practical to do it here unless you know anyone in a bodyshop to do the bodywork and ready to blow some moolah. that setup is pretty common in Indonesia, since the labor is dirt cheap and they willing to do anything to please the customer ...unlike here... because the shop has a liability and still do a crappy job for most of them. it's a hot stance indeed

11-14-2011, 11:45 AM	#8
contraband831 El Huevo Drives: 2007 Liftback Join Date: Aug 2006 Location: CEN*CAL Posts: 959	wow those fenders need help, hopefully they will get them pulled or something fabricated because they look chewed up! __________________

11-14-2011, 11:46 PM	#10
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	I could use those rear wheels no problem. Offset is probably pretty high, close to a +40 i'm guessing on the rear. Those fenders are destroyed. More concerned with his expensive wide (high offset) rear wheels and less about actually making the body work with it. And the car isnt even all that low. That back few the car is kinda high.

11-15-2011, 02:16 AM	#11
SAV912 Pirate Yaaaaris View User's Garage Drives: '00 Toyota Celica GTS 6MT Join Date: Aug 2009 Location: Savannah, GA Posts: 573	^ In what twisted world of sensibility is the back of that car high?? 'Stanced' people really trip me out. That fender is jacked, the wheels aren't even hot, and the stretch is stupid. Pass. This is a case of 'because everyone told me I can't, I tried.' -C __________________ Georgia Bulldogs! '09 Yaris LB 5MT Sold.

11-15-2011, 02:38 AM	#12
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	all show no go... who cares about being fast if you can look like it? except... this car doesn't even look fast... dysfunctional, for sure though! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

11-17-2011, 12:56 PM	#13
minken Drives: Yaris 2006 Join Date: Oct 2011 Location: Sweden Posts: 4	luv it!

11-17-2011, 01:26 PM	#14
Kaykogi View User's Garage Drives: 2009 Barcelona Red Sedan Join Date: Apr 2011 Location: UT, US Posts: 115	I can hear the scraping sound from here.

11-17-2011, 11:09 PM	#15
Kendrik Drives: 2011 Yaris Sedan Join Date: Oct 2011 Location: Asia Posts: 17	wheels are too big. might have looked better in a 16s with the same width/offsets. slammed!(^_^)

11-17-2011, 11:58 PM	#16
Crandall H8R View User's Garage Drives: 08 White RS Join Date: Sep 2007 Location: No Funswick Posts: 324	Dumber then a second coat of paint. __________________ \|No\|one\|cares\|about\|your\|mods\|

11-19-2011, 07:35 PM	#17
nevada View User's Garage Drives: Black Toyota Vits '08 Join Date: Aug 2009 Location: Indonesia Posts: 48	18x9 and 18x10.5 on Yaris is impossible to use. Unless you can rolled your Fender out then it will be find. You've got to modify the fender first before installing the Wheels. Suitable size for 18" wheels on Yaris would be 18x8 Max. Use this size before and i've got no problem at all ... CHeers

11-20-2011, 11:20 PM	#18
jekqmb Local Sh*t Disturber Drives: 2009 Yaris LB Join Date: Aug 2009 Location: STL Posts: 591	The Yaris can run an 18x10 no problem with the right camber adjustments and slight fender pull..... Too many people on this board are scared to push the limits. 16x10's have been done with zero modification on the Yaris......... I just think that Yaris is done awful and those fenders look like they were rolled with a bat and tapped with a hammer. __________________ You think your Yaris is low and fitted LOLzzzzz

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
DIY Cruise Control FAQ (2006-2010 Yaris)	CTScott	DIY / Maintenance / Service	467	10-18-2022 10:20 AM
Natural Gas Yaris	MadMax	General Yaris / Vitz Discussion	13	06-03-2017 06:10 AM
New 3 Door Yaris Pre Production Photos from the Australian International Motor Show	jeikz	Third Gen Yaris General Discussion	5	06-27-2011 11:56 PM