My 2011 Vitz

[tadakun]

Originally Posted by TerenceCruz

That's right, due to the crooked torsion beam in the rear, I was told 3mm-5mm spacer on the rear drivers side should do the trick. In my experience the 5mm poked out slightly more than I needed it to, so I purchased a 3mm spacer and that should be arriving within a couple of days. I think it'll be more even so we'll see. As soon as I install the spacer I will post a pic!

Ah ok ok keep me updated. My buddy hooked me up with a guy in SoCal I think that supplied his custom spacers for he AVante Gardes. I'll def get some custom hub centric spacers shortly.

[tadakun]

Just out of curiousity. What damper settings do you run on your set up?

[TerenceCruz]

Originally Posted by tadakun

Ah ok ok keep me updated. My buddy hooked me up with a guy in SoCal I think that supplied his custom spacers for he Avante Gardes. I'll def get some custom hub centric spacers shortly.

Will do! Ahh yes hub spacers will definitely do your car some justice. Maybe 16s and lower profile tires too? ;)

Originally Posted by tadakun

Just out of curiousity. What damper settings do you run on your set up?

I'm running 32, max stiffness all around. I still rub in the rear, but at the height in the front, no rubbing which amazes me lol

[TerenceCruz]

So, 3mm spacer on the rear driver side is on! Driveway and angle makes it look like the rear driver side pokes a little more but on a flat surface it's actually almost perfectly even IMO. I'm glad I chose the 3mm!

12647844_898219360286879_1101061942_n by Tj Cruz, on Flickr

Picture that my lady took of me and the car ;)

12606787_898219313620217_934230536_n by Tj Cruz, on Flickr

Here's a quick video a buddy of mine took and put together of our trip to Lafayette Reservoir where the 3rd annual Initial D meet took place. Such a great experience, with a lot of really nice cars! Over 1000 people and over 450 cars came so a lot of them were not allowed to enter the parking lot since it filled up. You'll see my car at 27 seconds, 1:06, and my lovely lady and I at 3:04.

https://www.youtube.com/watch?v=ukFo2mP3QVw

More pictures of the meet, and a photo shoot of some of us that were near enough to gather around the Initial D replica FD, FC, and AE86.

12607259_898227400286075_1850694033_n by Tj Cruz, on Flickr
12630680_898227373619411_2129099541_o by Tj Cruz, on Flickr

Also someone sent me a video of me leaving the meet. Wish it was better quality but it's all good!!

https://www.flickr.com/photos/128946.../shares/59GU5J

Enjoy guys! :D

[tadakun]

I plan on stayin 15s until I can afford a good set of wheels. I'm currently running the stock size tires until I wear them out. Then I'll change to a lower profile. You know....because more low. :D thanks for the heads up on the 3mm difference. I'll be getting 5mm and 8mm spacers after I slap on the camber plate.

[TerenceCruz]

Originally Posted by tadakun

I plan on stayin 15s until I can afford a good set of wheels. I'm currently running the stock size tires until I wear them out. Then I'll change to a lower profile. You know....because more low. :D thanks for the heads up on the 3mm difference. I'll be getting 5mm and 8mm spacers after I slap on the camber plate.

Sweet definitely a good plan! I'm actually going to be taking off my 10mm PG hub spacers because the poke is actually a little too much and I need some clearance to go lower. So at the end I'll just be running the camber shims, with a 8mm spacer on the driver rear, and 5mm spacer in the passenger rear.

[ern-diz]

That 3rd annual Initial D meet vid was an enjoyable watch. Some really cool cars. Thanks for the share.

[TerenceCruz]

Originally Posted by ern-diz

That 3rd annual Initial D meet vid was an enjoyable watch. Some really cool cars. Thanks for the share.

No problem, glad you enjoyed the video!

[TerenceCruz]

Some more awesome pictures I found of my car from the meet :)

12647817_902597476515734_1457751552_n by Tj Cruz, on Flickr
12648133_902597486515733_1566527378_n by Tj Cruz, on Flickr
12647850_902597503182398_569264213_n by Tj Cruz, on Flickr
12595940_902585929850222_973851448_n by Tj Cruz, on Flickr
12647712_902585949850220_481613731_n by Tj Cruz, on Flickr

[tadakun]

that rear poke bruh. love it.

[TerenceCruz]

Originally Posted by tadakun

that rear poke bruh. love it.

Thank you man! I love it too, but the pictures actually didn't do it justice. It poked out a lot and all I could smell during the drive was burning tire! Hahaha. So, I took out the 10mm spacers (they are now for sale) So i'm just running camber shims in the rear, and I'm waiting on some 5mm spacers. Don't worry, the poke is still there

[yarisugi]

I LOVE
!!

[TerenceCruz]

Originally Posted by yarisugi

I LOVE
!!

Sugi can I have your air ride, wheels, and car please? Thank you! Can you post on here some pics of your car? I miss it and it gives me motivation ;) hahahaha

[ern-diz]

Originally Posted by TerenceCruz

Sugi can I have your air ride, wheels, and car please? Thank you! Can you post on here some pics of your car? I miss it and it gives me motivation ;) hahahaha

+1

[TerenceCruz]

Happy to say I finally pulled the trigger and purchased a used TRD axle back :D It just need a good polish but I think it's still in good condition! Will post pictures once it arrives and is installed! ;)

[tadakun]

Originally Posted by yarisugi

I LOVE
!!

poke game on point. gawd that looks so good.

[tadakun]

Originally Posted by TerenceCruz

Happy to say I finally pulled the trigger and purchased a used TRD axle back :D It just need a good polish but I think it's still in good condition! Will post pictures once it arrives and is installed! ;)

awesome! can't wait to see.

We need a general discussion just for the fitment gang around these parts. haha.

[TerenceCruz]

Originally Posted by tadakun

awesome! can't wait to see.

We need a general discussion just for the fitment gang around these parts. haha.

I totally agree lol