|
09-06-2009, 05:42 PM | #1 |
mounting amp rack to back seat
Anyone have a picture of the back of the back fold down seat without upolstery. I am trying to mount a rack to it but I need to know where the good mounting points are.
|
|
09-06-2009, 06:31 PM | #2 |
Drives: 07 Yaris liftback Join Date: Nov 2008
Location: Irving, TX
Posts: 47
|
I don't have a picture without the upolstery, but I was able to just feel the back of the seat and find the metal. Then I just used self tapping screws to mount the amp to the seat.
|
09-06-2009, 06:38 PM | #3 |
Drives: altima, yaris Join Date: Jul 2009
Location: Hamilton, ON
Posts: 16
|
the carpet on the back of the seat has zippers and if u undo those and unclip the bottom of it you will be able to see the metal studding...it's not much to mount an amp to. I just mounted it on the spare tire cover for my gf's yaris
|
09-06-2009, 06:53 PM | #4 |
I have to use the seat the sub is in the spare well
|
|
09-06-2009, 07:23 PM | #5 |
You could probably buy 4 mini U-bolt clamps and put them around the bars that are in the seat and attach them to a piece of covered plywood. Then screw the amp to the wood. That was my plan until I found out my amp was too long :(
__________________
In a world... where things squeak, wont fit,start to bleed, or are just plain hard to do.... ArmorAll will fix that |
|
09-06-2009, 07:43 PM | #6 |
that sounds like a plan
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY - Sparco Race Seat Install | Idjiit | DIY / Maintenance / Service | 16 | 08-14-2017 09:15 PM |
Back Seat Removal... | Idjiit | DIY / Maintenance / Service | 87 | 02-08-2015 12:07 PM |
Recommend best butt and back seat cushion? | ScottFern | Cosmetic Modifications (Exterior/Interior) | 14 | 09-22-2006 09:10 AM |
Back seat folding | Chaad32 | General Yaris / Vitz Discussion | 7 | 07-17-2006 01:44 PM |
back seat | KSIbucky | General Yaris / Vitz Discussion | 10 | 05-30-2006 12:54 PM |